Contact Us
Opens in a new tab
Back to Sivoia QS documents

085528 · CAD Drawing · Rev A · English · PDF, DWG, DXF

Lutron Sivoia QS Roller 225 CAD Drawing: Dual Sub-Bracket, Detail Drawing (085528)

Lutron's detail drawing of the Sivoia QS Roller 225 dual sub-bracket.

Open PDF, 1 page, opens on assets.lutron.com in a new tabOpen DWG, downloads from assets.lutron.com for CAD softwareOpen DXF, downloads from assets.lutron.com for CAD software

About document 085528

Lutron drawing 085528, revision A, is the dual sub-bracket detail drawing at 1/4 scale: plan, elevation, section and isometric views with the bracket depth, width and height, and no hole dimension, fastener, material or finish.

What drawing 085528 covers

Lutron document 085528 has these six sections, all on its one page.

  1. Plan view of the dual sub-bracket
  2. Elevation view
  3. Section view
  4. Isometric view
  5. Bracket depth, width and height, inches with millimeters
  6. Title block with scale, number and revision

Specifications in 085528

Lutron document 085528 prints eight values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.

Dimensions

PDF page 1 of 085528, opens in a new tab
Bracket depth
6.00 in (152 mm)
Bracket width
5.25 in (133 mm)
Bracket height
11.48 in (292 mm)

Views

PDF page 1 of 085528, opens in a new tab
Views on the sheet
Plan, elevation, section and isometric

Title block

PDF page 1 of 085528, opens in a new tab
Part
Roller 225 dual sub-bracket
Drawing number
085528
Scale
1/4
Revision
A

Facts Lutron states in 085528

The values Lutron document 085528 states, as published:

Subject
Roller 225 dual sub-bracket, drawn on its own in four views
Bracket depth
6.00 in (152 mm)
Bracket width
5.25 in (133 mm)
Bracket height
11.48 in (292 mm)
Views
Plan, elevation, section and isometric, all on one sheet
Scale
1/4
Drawing number and revision
085528, revision A, printed in the title block without a view number
Date
No date printed
Not on the sheet
No hole dimensions, fastener sizes, material, finish or notes are printed on drawing 085528
File formats
PDF, DWG and DXF

Questions about document 085528

The answers come from Lutron document 085528 and New Way's record of it.

What is Lutron document 085528?

Lutron's detail drawing of the Sivoia QS Roller 225 dual sub-bracket. Lutron drawing 085528, revision A, is the dual sub-bracket detail drawing at 1/4 scale: plan, elevation, section and isometric views with the bracket depth, width and height, and no hole dimension, fastener, material or finish.

Which revision of 085528 is current?

Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.

Which roller shades does 085528 cover?

Lutron Sivoia QS roller shades in the Roller 225 drive class.

What size is the Roller 225 dual sub-bracket?

Lutron drawing 085528 prints three dimensions for the dual sub-bracket.

  • Bracket depth: 6.00 in (152 mm)
  • Bracket width: 5.25 in (133 mm)
  • Bracket height: 11.48 in (292 mm)

Which revision is drawing 085528, and is it dated?

Lutron drawing 085528 prints revision A in its title block. Lutron prints no date on the sheet.

Does drawing 085528 dimension the holes or give fastener sizes?

No. Lutron drawing 085528 draws the holes in its views but prints no hole dimensions and no fastener sizes.

The only figures on the sheet are the bracket depth, width and height.

Which drawing details the Roller 225 wall, ceiling and jamb sub-bracket?

Lutron drawing 085527 is the Roller 225 wall/ceiling/jamb sub-bracket detail drawing. Lutron drawing 085528 covers the dual sub-bracket only.

Which views does drawing 085528 include?

Lutron drawing 085528 shows the dual sub-bracket in plan, elevation, section and isometric views on one sheet at 1/4 scale.

Ask about 085528

Other Sivoia QS Roller 225 CAD drawings

CAD drawings for the same Sivoia QS Roller 225 drive class:

DocumentDrive classRevisionDate
085529Roller 225 CAD Drawing: Left Shade Bracket, Detail DrawingSame drive, Left Shade Bracket, Detail DrawingPDF, DWG, DXFRev ARoller 225 · Rev A · –Roller 225A
085526Roller 225 CAD Drawing: Right Shade Bracket, Detail DrawingSame drive, Right Shade Bracket, Detail DrawingPDF, DWG, DXFRev ARoller 225 · Rev A · –Roller 225A
085527Roller 225 CAD Drawing: Wall/Ceiling/Jamb Sub-Bracket, Detail DrawingSame drive, wall mountPDF, DWG, DXFRev ARoller 225 · Rev A · –Roller 225A
085525Roller 225 CAD Drawing: Dual Mount Shade in 8″ x 14″ Pocket, Elevation ViewSame drive, pocket mountPDF, DWG, DXFRev ARoller 225 · Rev A · –Roller 225A
All 142 Sivoia QS CAD drawings

Documents used with 085528

Lutron's other Roller 225 bracket details are 085527 (wall/ceiling/jamb sub-bracket), 085529 (left shade bracket) and 085526 (right shade bracket). Lutron document 045191 is the Roller 225 installation guide, and 086105 the Roller 225 specification submittal.

DocumentTypeRevisionDate
045191Roller 225 Installation GuideInstallation guide: Roller 225Rev AInstallation Guide · Rev A · –Installation GuideA
086105Roller 225 Specification SubmittalThe submittal for this shade, with the models it coversRev ASpecification Submittal · Rev A · –Specification SubmittalA
0853144-Group RF Remote Control Specification SubmittalSpecification submittal: 4-Group RF Remote ControlRev C · May 2016Specification Submittal · Rev C · May 2016Specification SubmittalCMay 2016
369847Pico Wireless Control, 4-Button Specification SubmittalSpecification submittal: Pico Wireless Control, 4-ButtonRev K · Mar 2024Specification Submittal · Rev K · Mar 2024Specification SubmittalKMar 2024
Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/LowerRevit family, QS Shading Keypad 3-Group 3-Button with Raise/Lower; Revit family (.rfa)Revit Family · Rev – · –Revit Family
085274Hard Wired Power Supply Specification SubmittalPower for this shadeRev D · Aug 2014Specification Submittal · Rev D · Aug 2014Specification SubmittalDAug 2014
048846Application Note: EU EcoDesign Standby Power InformationLutron's note on EU EcoDesign Standby Power InformationRev A · Nov 2024Application Note · Rev A · Nov 2024Application NoteANov 2024
048863Roller Shades Application Note: Fabric Aesthetic CharacteristicsLutron's note on Fabric Aesthetic CharacteristicsRev A · May 2026Application Note · Rev A · May 2026Application NoteAMay 2026
0454114-Group RF Remote Control Installation GuideInstallation guide: 4-Group RF Remote ControlRev D · Jan 2015Installation Guide · Rev D · Jan 2015Installation GuideDJan 2015
045520Basic Wiring and Setup Installation GuideInstallation guide: Basic Wiring and SetupRev B · Nov 2016Installation Guide · Rev B · Nov 2016Installation GuideBNov 2016
All 85 Roller 225 documentsAll 246 Sivoia QS documents

Revisions of 085528

This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.

RevisionDateStatus
ANot statedCurrent. The file on assets.lutron.com. Checked 16 Oct 2026.

Not covered in 085528, and what to read next

Lutron drawing 085528 gives only the dual sub-bracket's depth, width and height: no hole dimension, fastener, shade or pocket.

  • Mounting: 045191, the Roller 225 installation guide
  • Other sub-bracket: 085527, the wall/ceiling/jamb sub-bracket detail drawing

Publisher and citation for document 085528

Lutron Electronics Co., Inc. publishes document 085528, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.

Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.

Reviewed by Edmond Hong, Technical Specialist, New Way.

Specifying Sivoia QS?

New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.

The form opens with document 085528 filled in.

Ask a New Way specifierWhatsApp a specifier

See Lutron Roller Shades by New Way