You searched and this document matched it.
See all results086105 · Specification Submittal · Rev A · English · PDF, 12 pages, 1.3 MB
Lutron Sivoia QS Roller 225 Specification Submittal (086105, rev A)
Lutron's specification submittal for the Sivoia QS Roller 225, a roller shade carrying up to 225 sq ft (21 sq m) of fabric.
Lutron 086105 Rev A, Sivoia QS Roller 225 Specification Submittal. https://assets.lutron.com/a/documents/086105 a.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-225-specification-submittal-086105/
About document 086105
Lutron document 086105, Rev A, is the Roller 225 specification submittal: noise, alignment, light gap, 24 V DC power, system capacity, grouping, integration, QS link wiring rules, two wiring diagrams and the limited warranty.
What submittal 086105 covers
Lutron document 086105 has these eleven sections. Each link opens the PDF at that page in a new tab.
- Features, opens in a new tab page 1
- Specifications: power and system capacity, opens in a new tab page 2
- Performance, grouping, integration and controls, opens in a new tab page 2
- Shade options, opens in a new tab page 3
- Dimensions, opens in a new tab page 4
- Bracket, opens in a new tab page 5
- QS link rules and power supply wiring guide, opens in a new tab page 6
- System wiring: one shade per panel output, opens in a new tab page 7
- System wiring with GRAFIK Eye QS, opens in a new tab page 8
- Limited warranty, opens in a new tab page 9
- Technical assistance, opens in a new tab page 12
Specifications in 086105
Lutron document 086105 prints 50 values in the groups the document uses, each with the document's unit. A row names the catalog codes it applies to. The page link beside each group opens the PDF where the group starts.
- Noise
- 38 dBA maximum, measured 3 ft (1 m) from the EDU
- Alignment
- Within 0.125 in (3 mm) at all times
- Light gap
- 0.75 in (19 mm) between the fabric and the window frame; symmetrical on both sides
- Shade groups
- No group controls or relay systems needed for groups and sub-groups
- Power failure memory
- For the lifetime of the product
- Operating voltage
- Low-voltage Class 2, 24 V DC power supply required
- Overvoltage protection
- Spike and brownout, +/-10% of line voltage, for all devices in the system
- ESD protection
- Provided by the power supply for all devices
- Power source
- Lutron approved NEC Class 2
System Capacity
PDF page 2 of 086105, opens in a new tab- Devices
- 100 in total: Sivoia QS shades, seeTouch QS keypads, GRAFIK Eye QS, QS power supplies
- Zones
- 100 in total, including Sivoia QS shades and GRAFIK Eye QS
- Maximum shade fabric per EDU
- 225 sq ft (21 sq m)
Performance
PDF page 2 of 086105, opens in a new tab- Symmetrical light gaps
- As small as 0.75 in (19 mm) on each side
- Stored positions
- Presets at any stop point, plus full open and full close limits
- Stopping accuracy
- 0.125 in (3 mm) steps over the entire travel
- Preset adjustment
- 5 second press and hold on a seeTouch QS keypad or GRAFIK Eye QS
- Multiple EDUs
- Move in unison, aligned within 0.125 in (3 mm)
- Limit programming
- From the EDUs, wall-mounted seeTouch QS keypads and/or GRAFIK Eye QS
- Group control
- Any EDU, group or subgroup from system keypads, without a separate group controller or interface
- Regrouping
- At the point of control, without rewiring or access to the EDU
Integration
PDF page 2 of 086105, opens in a new tab- Lutron lighting control
- GRAFIK Eye QS, without a separate interface
- Third-party integration
- Contact closure, RS232 and ethernet
- Shade controls
- GRAFIK Eye QS built-in shade columns or seeTouch QS keypads (low voltage), all on one communications link
Shade Options
PDF page 3 of 086105, opens in a new tab- Mounting
- Inside the window frame, outside the window frame, or in a pocket
- Drive side
- EDU on the left or right of the shade
- Fabric drop
- Regular roll or reverse roll
- Bottom bars
- Half-wrap or exposed; welded bottom bars also available
- Exposed bottom bar colors
- White, bronze, anodized, custom color
- Fabric types
- Sheer, privacy, blackout
Dimensions
PDF page 4 of 086105, opens in a new tab- Dimensions view, printed values at each bracket
- 4.0 in (102 mm); 5.0 in (127 mm)
- Complete assembly view, printed values
- 0.75 in (19 mm) at each side, beside the system width and fabric width labels
- Dimension A
- 6 in (152 mm)
- Dimension B
- 5.88 in (149 mm)
- Dimension C, maximum projection into the room
- 1.13 in (29 mm)
Link Rules
PDF page 6 of 086105, opens in a new tab- Devices per line
- 100 maximum
- Zones
- 100 maximum
- Cable connecting all smart panel power supplies
- 2000 ft (600 m) maximumModels: QSPS-P1-10-60
- Cable to the devices on each smart panel power supply
- 2000 ft (600 m) maximumModels: QSPS-P1-10-60
- Communication cable
- At least one twisted, shielded pair for MUX and MUX
Smart Panel Power Supply Wiring Guide
PDF page 6 of 086105, opens in a new tab- Up to 8 seeTouch QS keypads, no shade
- 1200 ft (350 m) on 12 AWG (4 mm²); 500 ft (150 m) on 16 AWG (1.5 mm²); 300 ft (75 m) on 18 AWG (1 mm²)
- 1 Roller 64, Roller 100, Roller 200CW or Roller 225, up to 1 seeTouch QS keypad
- 500 ft (150 m) on 12 AWG (4 mm²); 200 ft (60 m) on 16 AWG (1.5 mm²); 125 ft (35 m) on 18 AWG (1 mm²)
- 2 Roller 64 up to 30 sq ft (2.75 sq m) each, 3 Roller 64 up to 20 sq ft (1.8 sq m) each, or 2 Roller 100 up to 50 sq ft (4.6 sq m) each, no keypad
- 200 ft (60 m) on 12 AWG (4 mm²); 75 ft (20 m) on 16 AWG (1.5 mm²); 50 ft (15 m) on 18 AWG (1 mm²)
- 18 AWG (1 mm²) column cable
- GRX-CBL-346S-500Models: GRX-CBL-346S-500
System Wiring
PDF page 7 of 086105, opens in a new tab- Smart panel power supply
- 10-output, one shade per outputModels: QSPS-P1-10-60
- Panel supply
- 120 V~ 60 HzModels: QSPS-P1-10-60
- Wire type A
- Communications link: 4 conductor, twisted and shielded, listed for application; up to 2000 ft (600 m) connecting all panels
System Wiring with GRAFIK Eye QS
PDF page 8 of 086105, opens in a new tab- Added devices
- GRAFIK Eye QS and RS232 interface on the same link as the shades and seeTouch QS keypads
Limited Warranty
PDF page 9 of 086105, opens in a new tab- Wall controls, interfaces and system accessories
- 1 year from shipment
- Electronic drive unit, shade fabric and hardware
- 8 years from shipment
- Replacement part credit
- 100% up to 2 years; 50% from 2 to 5 years; 25% from 5 to 8 years; 0% after 8 years
Facts Lutron states in 086105
The values Lutron document 086105 states, as published:
- Maximum fabric per EDU
- 225 sq ft (21 sq m)
- Noise
- No more than 38 dBA measured 3 ft (1 m) from the EDU
- Alignment and stopping accuracy
- Shades move in alignment within 0.125 in (3 mm) and stop in 0.125 in (3 mm) steps over the full travel
- Light gap
- 0.75 in (19 mm) between the fabric and the window frame, symmetrical on both sides
- Operating voltage
- Low-voltage Class 2, 24 V DC, from a Lutron approved NEC Class 2 power source. Overvoltage protection of +/-10% of line voltage, and ESD protection
- System capacity
- 100 devices (shades, seeTouch QS keypads, GRAFIK Eye QS and QS power supplies) and 100 zones per system
- Communications link
- Type A: 4 conductor, twisted and shielded
- At least one twisted and shielded pair for MUX
- Up to 2000 ft (600 m) connecting all smart panel power supplies
- Up to 2000 ft (600 m) from each panel to its devices
- Output distance, one shade
- One Roller 64, 100, 200CW or 225 plus up to one seeTouch QS keypad per output.
- 500 ft (150 m) on 12 AWG (4 mm²)
- 200 ft (60 m) on 16 AWG (1.5 mm²)
- 125 ft (35 m) on 18 AWG (1 mm²)
- Output distance, keypads only
- Up to 8 seeTouch QS keypads per output.
- 1200 ft (350 m) on 12 AWG (4 mm²)
- 500 ft (150 m) on 16 AWG (1.5 mm²)
- 300 ft (75 m) on 18 AWG (1 mm²)
- Smart panel power supply
- QSPS-P1-10-60, a 10-output smart panel fed at 120 V~ 60 Hz, one Roller 225 per output in the system diagrams
- Bracket dimensions
- A 6 in (152 mm), B 5.88 in (149 mm), C 1.13 in (29 mm), the maximum projection into the room
- Preset adjustment
- Anywhere between the limits, by a 5 second press and hold on a seeTouch QS keypad or GRAFIK Eye QS
- Warranty
- Drive, fabric and hardware: 8 year limited warranty
- Wall controls, interfaces and accessories: 1 year
- Parts credit: 100% up to 2 years, 50% from 2 to 5
- Parts credit: 25% from 5 to 8
Questions about document 086105
The answers come from Lutron document 086105 and New Way's record of it.
What is Lutron document 086105?
Lutron's twelve-page Roller 225 product specification, Rev A, with no issue date and a 2012 copyright line. Lutron's EDU sits inside the shade assembly and runs on 24 V DC low-voltage power.
Which revision of 086105 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 15 October 2026.
Which roller shades does 086105 cover?
Lutron Sivoia QS roller shades in the Roller 225 drive class.
How much fabric can a Roller 225 drive carry?
Up to 225 sq ft (21 sq m) of fabric per EDU, per Lutron document 086105. Noise stays at or below 38 dBA at 3 ft (1 m), with alignment within 0.125 in (3 mm).
What power does a Roller 225 need?
Lutron document 086105 specifies low-voltage Class 2, 24 V DC power from a Lutron approved NEC Class 2 source. In the system diagrams each Roller 225 takes one output of a QSPS-P1-10-60 smart panel power supply.
That panel is fed at 120 V~ 60 Hz.
How far can a Roller 225 sit from its power panel output?
Lutron document 086105 allows one shade plus up to one seeTouch QS keypad per output, by wire gauge.
- 12 AWG (4 mm²): up to 500 ft (150 m)
- 16 AWG (1.5 mm²): up to 200 ft (60 m)
- 18 AWG (1 mm²): up to 125 ft (35 m), under GRX-CBL-346S-500
What are the QS link limits for a Roller 225 system?
Lutron document 086105 allows 100 devices and 100 zones per link.
- 2000 ft (600 m) of cable joining all smart panel power supplies
- 2000 ft (600 m) from each panel to its devices
- Cable with at least one twisted, shielded pair for the MUX communication
Which fabrics and bottom bars are offered on the Roller 225?
Lutron document 086105 lists sheer, privacy and blackout fabric types, in regular roll or reverse roll. Lutron shows a half-wrap and an exposed bottom bar, and notes that welded bottom bars are also available.
The exposed bar comes in white, bronze, anodized or a custom color.
Other Sivoia QS specification submittals
Specification submittals for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085267Roller Shades Specification Submittal: Roller 150 | D | Apr 2024 | |
| 086107Roller Shades Specification Submittal: Roller 200CW | A | ||
| 0853144-Group RF Remote Control Specification Submittal | C | May 2016 | |
| 085274Hard Wired Power Supply Specification Submittal | D | Aug 2014 |
Documents used with 086105
Lutron documents 086112, 086107 and 085267 are the Roller 20, Roller 200CW and Roller 150 specification submittals. Lutron document 086105 names no other document by number.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045191Roller 225 Installation Guide | Installation Guide | A | |
| 085525Roller 225 CAD Drawing: Dual Mount Shade in 8″ x 14″ Pocket, Elevation View | CAD Drawing | A | |
| 085523Roller 225 CAD Drawing: Dual Mount Shade in 8″ x 14″ Pocket, Section View | CAD Drawing | A | |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
| 0454114-Group RF Remote Control Installation Guide | Installation Guide | D | Jan 2015 |
| 045000710 Output Power Panel Power Supply (12 V) Installation Guide | Installation Guide | A | Jul 2025 |
| 04562030-Output Configurable Power Panel Enclosure, 35V Output Installation Guide | Installation Guide | B | Jan 2018 |
| Roller Shades Wiring Diagram: Multiple Shades per Single QS Smart Panel | Wiring Diagram |
Revisions of 086105
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 15 Oct 2026. |
Not covered in 086105, and what to read next
Lutron document 086105 gives no mounting steps, no limit setting and no programming procedure.
Publisher and citation for document 086105
Lutron Electronics Co., Inc. publishes document 086105, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 15 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 086105 filled in.
