You searched and this document matched it.
See all results085522 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Roller 225 CAD Drawing: Jamb Mount Shade in 7″ Square Pocket, Section View (085522)
Lutron's section drawing of the Sivoia QS Roller 225 jamb mount shade in a 7 in x 7 in pocket.
Lutron 085522 Rev A, Sivoia QS Roller 225 CAD Drawing: Jamb Mount Shade in 7 in. Square Pocket, Section View. https://assets.lutron.com/a/documents/0059-r225-jrm-s.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-225-cad-drawing-jamb-mount-shade-in-7-square-pocket-section-view/
About document 085522
Lutron drawing 085522, revision A, is the section, view 1 at 1/2 scale: the pocket depth and height, tube and roll-up diameters, two tube centers, the projection adjustment, and the mounting and clearance notes.
What drawing 085522 covers
Lutron document 085522 has these seven sections, all on its one page.
- Section view of the shade in its pocket
- Legend keyed to the top view
- Pocket depth and pocket height
- Tube diameter, maximum roll-up and tube center positions
- Sub-bracket, fasteners, projection, glazing and hembar labels
- Notes on clearances and mounting positions
- Title block with scale, view, number and revision
Specifications in 085522
Lutron document 085522 prints 14 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Pocket depth
- 7.00 in (178 mm)
- Pocket height
- 7.00 in (178 mm)
- Tube diameter
- 3.75 in (95 mm)
- Maximum roll-up diameter
- 5.25 in (133 mm)
- Tube center
- 3.81 in (96 mm)
- Tube center
- 3.38 in (86 mm)
- Projection adjust
- -0.5 in / +0 in (no millimeter value printed)
- Unlabelled dimension
- 1.19 in (30 mm), unlabeled
- Hembar
- Varies
- Mounting positions
- Ceiling, wall or jamb; ceiling mount shown
Title block
PDF page 1 of 085522, opens in a new tab- Drawing number
- 085522
- Scale
- 1/2
- View
- 1
- Revision
- A
Facts Lutron states in 085522
The values Lutron document 085522 states, as published:
- Pocket size
- 7.00 in (178 mm) pocket depth and 7.00 in (178 mm) pocket height
- Tube diameter
- 3.75 in (95 mm)
- Maximum roll-up
- 5.25 in (133 mm) diameter
- Tube center
- 3.81 in (96 mm) and 3.38 in (86 mm), without saying what each is measured from
- Projection adjustment
- -0.5 in / +0 in, printed in inches only, so the projection can be reduced and not extended
- Labeled parts
- Sub-bracket, ceiling fasteners, glazing (typical) and hembar (varies)
- Mounting
- The bracket supports ceiling, wall or jamb mounting, with a ceiling mount shown
- Clearance note
- A shade installed as supplied by the factory has the clearances it needs
- Clearances after adjustment
- An installer who uses the adjustment features must keep them
- Adjustments at maximum roll
- Not every adjustment is available at the maximum roll diameter
- Unlabeled value
- 1.19 in (30 mm) is unlabeled
- Scale, view and revision
- 1/2 scale, view 1, revision A, no date printed
- Not on the drawing
- No shade width, fastener size, bracket spacing, model number or wiring is printed
- File formats
- PDF (one page), DWG and DXF
Questions about document 085522
The answers come from Lutron document 085522 and New Way's record of it.
What is Lutron document 085522?
Lutron's section drawing of the Sivoia QS Roller 225 jamb mount shade in a 7 in x 7 in pocket. Lutron drawing 085522, revision A, is the section, view 1 at 1/2 scale: the pocket depth and height, tube and roll-up diameters, two tube centers, the projection adjustment, and the mounting and clearance notes.
Which revision of 085522 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085522 cover?
Lutron Sivoia QS roller shades in the Roller 225 drive class.
What pocket size does Lutron draw for the jamb mount shade?
Lutron drawing 085522 draws a pocket 7.00 in (178 mm) deep and 7.00 in (178 mm) high.
How large is the roll-up?
Lutron drawing 085522 prints a 3.75 in (95 mm) tube diameter and a 5.25 in (133 mm) maximum roll-up diameter.
Can the bracket projection be adjusted?
Lutron drawing 085522 prints a projection adjustment of -0.5 in / +0 in, in inches only. The projection can be reduced and not extended.
Which fixings and parts are labeled?
Lutron drawing 085522 labels the sub-bracket, the ceiling fasteners, the glazing (typical) and the hembar (varies). No fastener size or type is printed.
Which mounting positions does the bracket allow?
Lutron's note on drawing 085522 says the bracket supports ceiling, wall or jamb mounting. The section shows the ceiling mount.
Other Sivoia QS Roller 225 CAD drawings
CAD drawings for the same Sivoia QS Roller 225 drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085524Roller 225 CAD Drawing: Jamb Mount Shade in 7″ Square Pocket, Elevation View | Roller 225 | A | |
| 085527Roller 225 CAD Drawing: Wall/Ceiling/Jamb Sub-Bracket, Detail Drawing | Roller 225 | A | |
| 085528Roller 225 CAD Drawing: Dual Sub-Bracket, Detail Drawing | Roller 225 | A | |
| 085529Roller 225 CAD Drawing: Left Shade Bracket, Detail Drawing | Roller 225 | A |
Documents used with 085522
Lutron drawing 085524 is the paired elevation; bracket details are 085527 (sub-bracket), 085528 (dual sub-bracket), 085529 (left) and 085526 (right). Lutron document 045191 is the Roller 225 installation guide, and 086105 the Roller 225 specification submittal.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045191Roller 225 Installation Guide | Installation Guide | A | |
| 086105Roller 225 Specification Submittal | Specification Submittal | A | |
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| 369847Pico Wireless Control, 4-Button Specification Submittal | Specification Submittal | K | Mar 2024 |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 085274Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
| 0454114-Group RF Remote Control Installation Guide | Installation Guide | D | Jan 2015 |
| 045520Basic Wiring and Setup Installation Guide | Installation Guide | B | Nov 2016 |
Revisions of 085522
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085522, and what to read next
Lutron drawing 085522 gives the section only: no shade width, fastener size, bracket spacing or wiring.
Publisher and citation for document 085522
Lutron Electronics Co., Inc. publishes document 085522, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085522 filled in.
