You searched and this document matched it.
See all results085670 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Roller 64 CAD Drawing: WIDR Wall Mount, Elevation View (085670)
Lutron's CAD elevation of the Sivoia QS Roller 64 WIDR wall mount shade, drawn at scale 1/4.
Lutron 085670 Rev A, Sivoia QS Roller 64 CAD Drawing: WIDR Wall Mount, Elevation View. https://assets.lutron.com/a/documents/085670_roller_64_widr_wall_mount_elevation_view.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-64-cad-drawing-widr-wall-mount-elevation-view/
About document 085670
Lutron drawing 085670, rev A, is the elevation, view 2: the minimum width of shade, the minimum shade height, the minimum light gap and a clearance note for installers who adjust the shade.
What drawing 085670 covers
Lutron document 085670 has these four sections, all on its one page.
- Elevation view of the wall-mounted shade
- Legend (top view)
- Clearance note for adjustment features
- Title block with number, scale, view, revision
Specifications in 085670
Lutron document 085670 prints three values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Minimum width of shade
- 17.5 in (445 mm)
- Minimum shade height
- 12 in (305 mm)
- Minimum light gap
- 0.75 in (19 mm)
Facts Lutron states in 085670
The values Lutron document 085670 states, as published:
- Shade covered
- Roller 64 WIDR wall mount shade
- Minimum width of shade
- 17.5 in (445 mm)
- Minimum shade height
- 12 in (305 mm)
- Minimum light gap
- 0.75 in (19 mm)
- Clearances as supplied
- a shade installed as the factory supplies it has the clearances it needs to operate
- Adjustment features
- once an adjustment feature is used, the installer is responsible for keeping proper clearances
- Adjustments at maximum roll diameter
- not every adjustment is available at the maximum roll diameter
- Scale, view and revision
- scale 1/4, view 2, revision A
Questions about document 085670
The answers come from Lutron document 085670 and New Way's record of it.
What is Lutron drawing 085670?
Lutron's one-page sheet, with a legend drawn as a top view and no issue date printed.
Which revision of 085670 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085670 cover?
Lutron Sivoia QS roller shades in the Roller 64 drive class.
What minimum width does drawing 085670 give?
Lutron drawing 085670 gives a minimum width of shade of 17.5 in (445 mm).
What minimum height and light gap does the elevation show?
Lutron drawing 085670 shows a minimum shade height of 12 in (305 mm) and a minimum light gap of 0.75 in (19 mm).
Who keeps the clearances if the shade is adjusted on site?
Lutron drawing 085670 states a shade installed as supplied by the factory has the clearances it needs.
Once adjustment features are used, the installer must keep proper clearances. Not all adjustments are available at the maximum roll diameter.
Does drawing 085670 give the tube size or wall fasteners?
Lutron drawing 085670 prints the elevation only, with three labeled minimum dimensions and no tube size or fasteners. The section view of the same shade is drawing 085669.
Which drawing gives the section of the same shade?
Lutron drawing 085669 is the section view of the Roller 64 WIDR wall mount shade. Drawing 085670 is its elevation.
Other Sivoia QS Roller 64 CAD drawings
CAD drawings for the same Sivoia QS Roller 64 drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085667Roller 64 CAD Drawing: WIDR Ceiling Mount, Elevation View | Roller 64 | A | |
| 085669Roller 64 CAD Drawing: WIDR Wall Mount, Section View | Roller 64 | A | |
| 085666Roller 64 CAD Drawing: WIDR Ceiling Mount, Section View | Roller 64 | A | |
| 085419Roller 64 CAD Drawing: Wall Mount Shade Universal Bracket, Elevation View | Roller 64 | A |
Documents used with 085670
Lutron drawing 085669 is the matching section view; drawings 085667 and 085666 are the ceiling mount elevation and section. Lutron document 085705 is the Roller 64 specification submittal and 045937 the Roller 64 WIDR installation guide.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085705Roller 64 Specification Submittal | Specification Submittal | D | Sep 2025 |
| 045937Roller 64 Installation Guide: WIDR, Standard Single & Dual Mount Chassis (Universal Bracket) | Installation Guide | A | Aug 2023 |
| 045843Roller 64 Installation Guide: WIDR Pocket Mount | Installation Guide | B | Sep 2021 |
| 045929Roller 64 Installation Guide: WIDR, 4″ Fascia Mount Chassis (Regular Roll) | Installation Guide | B | Aug 2023 |
| Roller 64 Revit Family: Wall Mount | Revit Family | ||
| Roller 64 Revit Family: Ceiling Mount | Revit Family | ||
| Roller 64 Revit Family: Dual (Ceiling Mount) | Revit Family | ||
| Roller 64 Revit Family: Dual (Wall Mount) | Revit Family | ||
| Roller 64 Revit Family: Pocket Mount | Revit Family | ||
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
Revisions of 085670
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085670, and what to read next
Lutron drawing 085670 prints no labeled tube, bracket or fastener dimension and no mounting step.
Publisher and citation for document 085670
Lutron Electronics Co., Inc. publishes document 085670, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085670 filled in.
