You searched and this document matched it.
See all results085669 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Roller 64 CAD Drawing: WIDR Wall Mount, Section View (085669)
Lutron's CAD section of the Sivoia QS Roller 64 WIDR wall mount shade, drawn at scale 1/2.
Lutron 085669 Rev A, Sivoia QS Roller 64 CAD Drawing: WIDR Wall Mount, Section View. https://assets.lutron.com/a/documents/085669_roller_64_widr_wall_mount_section_view.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-64-cad-drawing-widr-wall-mount-section-view/
About document 085669
Lutron drawing 085669, rev A, is the section, view 1: tube diameter, maximum roll-up diameter, two tube center dimensions, one unlabeled dimension, four wall fasteners, the hembar and a clearance note for installers.
What drawing 085669 covers
Lutron document 085669 has these four sections, all on its one page.
- Section view of the wall-mounted shade
- Legend (top view)
- Clearance note for adjustment features
- Title block with number, scale, view, revision
Specifications in 085669
Lutron document 085669 prints eleven values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Tube diameter
- 2.00 in (51 mm)
- Maximum roll-up diameter
- 3.30 in (84 mm)
- Tube center (vertical dimension, right of the roll)
- 1.00 in (25 mm)
- Tube center (horizontal dimension, below the roll)
- 1.96 in (50 mm)
- Dimension without a label (horizontal, printed beside the hembar callout)
- 0.35 in (9 mm)
- Wall fasteners, quantity
- 4
- Hembar
- Varies, as labeled
Title block
PDF page 1 of 085669, opens in a new tab- Drawing number
- 085669
- Scale
- 1/2
- View
- 1
- Revision
- A
Facts Lutron states in 085669
The values Lutron document 085669 states, as published:
- Shade covered
- Roller 64 WIDR wall mount shade
- Tube diameter
- 2.00 in (51 mm) diameter
- Maximum roll-up diameter
- 3.30 in (84 mm)
- Tube center dimensions
- Labeled TUBE CENTER: 1.00 in (25 mm) drawn vertically beside the roll, 1.96 in (50 mm) drawn horizontally below it
- Dimension without a label
- 0.35 in (9 mm), printed beside the hembar callout with no name
- Fixings and parts labeled
- 4 wall fasteners (marked 4X), hembar (varies)
- Clearances as supplied
- a shade installed as the factory supplies it has the clearances it needs to operate
- Adjustment features
- once an adjustment feature is used, the installer is responsible for keeping proper clearances
- Adjustments at maximum roll diameter
- not every adjustment is available at the maximum roll diameter
- Scale, view and revision
- scale 1/2, view 1, revision A
Questions about document 085669
The answers come from Lutron document 085669 and New Way's record of it.
What is Lutron drawing 085669?
Lutron's one-page sheet, with a legend drawn as a top view and no issue date printed.
Which revision of 085669 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085669 cover?
Lutron Sivoia QS roller shades in the Roller 64 drive class.
What tube and roll-up diameters does drawing 085669 give?
Lutron drawing 085669 gives a 2.00 in (51 mm) tube diameter and a maximum roll-up of 3.30 in (84 mm) diameter.
Where does the tube center sit on the section?
Lutron drawing 085669 marks two dimensions labeled TUBE CENTER. The 1.00 in (25 mm) one is drawn vertically beside the roll, the 1.96 in (50 mm) one horizontally below it.
Lutron's sheet does not name the face either is measured from.
How many wall fasteners does the Roller 64 WIDR section show?
Lutron drawing 085669 labels four wall fasteners on the section, marked 4X.
How much head room does the rolled shade take?
Lutron drawing 085669 prints a maximum roll-up of 3.30 in (84 mm) diameter; the drawing gives no overall head height beyond that circle.
Who keeps the clearances if the shade is adjusted after mounting?
Lutron drawing 085669 states a shade installed as supplied by the factory has the clearances it needs.
The installer must keep proper clearances once adjustment features are used. Not all adjustments are available at the maximum roll diameter.
Other Sivoia QS Roller 64 CAD drawings
CAD drawings for the same Sivoia QS Roller 64 drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085666Roller 64 CAD Drawing: WIDR Ceiling Mount, Section View | Roller 64 | A | |
| 085670Roller 64 CAD Drawing: WIDR Wall Mount, Elevation View | Roller 64 | A | |
| 085667Roller 64 CAD Drawing: WIDR Ceiling Mount, Elevation View | Roller 64 | A | |
| 085430Roller 64 CAD Drawing: 3.5″ (89mm) Square Fascia with Top Back Cover, Section View | Roller 64 | A |
Documents used with 085669
Lutron drawing 085670 is the matching elevation view; drawings 085666 and 085667 are the ceiling mount section and elevation. Lutron document 085705 is the Roller 64 specification submittal and 045937 the Roller 64 WIDR installation guide.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085705Roller 64 Specification Submittal | Specification Submittal | D | Sep 2025 |
| 045937Roller 64 Installation Guide: WIDR, Standard Single & Dual Mount Chassis (Universal Bracket) | Installation Guide | A | Aug 2023 |
| 045843Roller 64 Installation Guide: WIDR Pocket Mount | Installation Guide | B | Sep 2021 |
| 045929Roller 64 Installation Guide: WIDR, 4″ Fascia Mount Chassis (Regular Roll) | Installation Guide | B | Aug 2023 |
| Roller 64 Revit Family: Wall Mount | Revit Family | ||
| Roller 64 Revit Family: Ceiling Mount | Revit Family | ||
| Roller 64 Revit Family: Dual (Ceiling Mount) | Revit Family | ||
| Roller 64 Revit Family: Dual (Wall Mount) | Revit Family | ||
| Roller 64 Revit Family: Pocket Mount | Revit Family | ||
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
Revisions of 085669
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085669, and what to read next
Lutron drawing 085669 prints no fastener size, no minimum shade width or height and no mounting step.
Publisher and citation for document 085669
Lutron Electronics Co., Inc. publishes document 085669, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085669 filled in.
