You searched and this document matched it.
See all results085404 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Roller Shades CAD Drawing: Roller 100/150/300 Dual-Mount Shade in 7″ x 11″ Pocket, Section View (085404)
Lutron's section view of the Roller 100/150/300 dual mount shade in a 7 in x 11 in pocket.
Lutron 085404 Rev A, Sivoia QS Roller Shades CAD Drawing: Roller 100/150/300 Dual-Mount Shade in 7 in. x 11 in. Pocket, Section View. https://assets.lutron.com/a/documents/085404.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-shades-cad-drawing-085404/
About document 085404
Lutron drawing 085404, revision A, is the CAD section view of that dual mount pocket: pocket depth and height, tube and roll-up sizes, tube center dimensions, mounting and installer notes.
What drawing 085404 covers
Lutron document 085404 has these twelve sections, all on its one page.
- Sheet header: Roller 100/150/300 dual mount
- Section view with hembar and glazing
- Pocket depth and pocket height
- Tube diameter, optional WIDR tube and maximum roll-up
- Tube center dimensions
- Projection adjust, pocket flap and hanger
- Unlabeled dimensions
- Sub-bracket and ceiling fasteners
- Mounting note, ceiling mount shown
- Legend (top view), view markers 1 and 2
- Installer note on clearances and adjustment
- Title block with scale, view and revision
Specifications in 085404
Lutron document 085404 prints 23 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
View 1, section view
PDF page 1 of 085404, opens in a new tab- Pocket depth
- 7.00 in (178 mm)
- Pocket height
- 11.00 in (279 mm)
- Tube diameter
- 2.56 in (65 mm)
- Tube diameter, optional WIDR
- 3.03 in (77 mm)
- Maximum roll-up diameter (printed twice)
- 4.00 in (102 mm)
- Tube center (vertical dimension, upper tube)
- 2.75 in (70 mm)
- Tube center (vertical dimension, lower tube)
- 6.75 in (171 mm)
- Tube center (horizontal dimension, lower tube)
- 3.88 in (99 mm)
- Tube center (horizontal dimension, upper tube)
- 2.88 in (72 mm)
- Projection adjust
- -0 in / +0.5 in (inches only)
- Pocket flap (optional), labeled 3 in
- 2.89 in (74 mm)
- Dimension without a label (horizontal, level with the lower roll)
- 1.88 in (48 mm)
- Dimension without a label (horizontal, level with the upper roll)
- 0.88 in (23 mm)
- Hembar
- Varies, as labeled
- Glazing
- Typical, as labeled
- Hanger (optional)
- Drawn without tile support
- Fixing shown
- Sub-bracket with ceiling fasteners
Mounting note
PDF page 1 of 085404, opens in a new tab- Mounting configurations
- Ceiling, wall or jamb; ceiling mount shown
Legend (top view)
PDF page 1 of 085404, opens in a new tab- View markers
- 1 and 2
Title block
PDF page 1 of 085404, opens in a new tab- Drawing number
- 085404
- Scale
- 1/2
- View
- 1
- Revision
- A
Facts Lutron states in 085404
The values Lutron document 085404 states, as published:
- Drawing number and revision
- 085404, revision A, in the title block, no issue date printed
- View and scale
- Section view, view 1, scale 1/2, with a top-view legend
- Shade drawn
- Roller 100/150/300 dual mount shade in a 7 in x 11 in pocket, ceiling mount shown
- Pocket depth
- 7.00 in (178 mm)
- Pocket height
- 11.00 in (279 mm)
- Tube diameter
- 2.56 in (65 mm)
- Optional WIDR tube diameter
- 3.03 in (77 mm)
- Maximum roll-up diameter
- 4.00 in (102 mm), printed twice
- Tube center dimensions
- The sheet names no face they are measured from.
- Drawn vertically to the upper tube: 2.75 in (70 mm)
- Drawn vertically to the lower tube: 6.75 in (171 mm)
- Drawn horizontally to the upper tube: 2.88 in (72 mm)
- Drawn horizontally to the lower tube: 3.88 in (99 mm)
- Projection adjust
- -0 in / +0.5 in, printed in inches only
- Pocket flap
- Optional 3 in pocket flap, dimensioned at 2.89 in (74 mm)
- Hanger
- Optional, drawn without tile support
- Dimensions without a label
- 0.88 in (23 mm) and 1.88 in (48 mm), both drawn horizontally, level with the upper and the lower roll
- Mounting
- Ceiling, wall or jamb with the same bracket per Lutron's note, ceiling mount with ceiling fasteners shown
- Installer note
- A factory-supplied shade has the clearances it needs
- The installer keeps the clearances once adjustment features are used
- Some adjustments are unavailable at the largest roll diameter
- File formats
- PDF (one sheet, about 325 KB), DWG and DXF
Questions about document 085404
The answers come from Lutron document 085404 and New Way's record of it.
What is Lutron drawing 085404?
Lutron's one-sheet section view of the dual mount pocket, view 1 at scale 1/2, with no issue date printed. Lutron publishes the sheet as a PDF of about 325 KB and as DWG and DXF files.
Which revision of 085404 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085404 cover?
Lutron Sivoia QS roller shades.
What pocket does the dual mount shade need?
Lutron drawing 085404 shows a pocket 7.00 in (178 mm) deep and 11.00 in (279 mm) high. Lutron also draws an optional 3 in pocket flap, dimensioned at 2.89 in (74 mm), and an optional hanger without tile support.
What roll-up diameter does the dual mount section allow?
Lutron drawing 085404 marks a maximum roll-up diameter of 4.00 in (102 mm), printed twice, on a 2.56 in (65 mm) tube. Lutron gives 3.03 in (77 mm) for the optional WIDR tube.
Can the dual mount bracket fix to a wall or jamb?
Lutron's mounting note on drawing 085404 allows ceiling, wall or jamb mounting with the same bracket. Lutron's section shows the ceiling mount, with the ceiling fasteners and sub-bracket labeled.
Lutron drawings 085389 (ceiling), 085383 (wall), 085386 (jamb) and 085831 (5 in pocket) are among the single-shade section views.
How much projection adjustment is there on the dual mount shade?
Lutron drawing 085404 marks a projection adjust of -0 in / +0.5 in, in inches only.
Lutron's note makes an installer who uses any adjustment responsible for the clearances. Lutron adds that some adjustments are not available at the largest roll diameter.
Where do the two tubes sit in the pocket?
Lutron drawing 085404 prints four tube center dimensions and names no face they are measured from.
- Vertical: 2.75 in (70 mm) upper tube, 6.75 in (171 mm) lower tube
- Horizontal: 2.88 in (72 mm) upper tube, 3.88 in (99 mm) lower tube
- Unlabeled, level with the rolls: 0.88 in (23 mm), 1.88 in (48 mm)
Other Sivoia QS CAD drawings
CAD drawings for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085833Roller Shades CAD Drawing: Roller 100/150/300 Dual Wall Mount in 7″X11″ Pocket, Section View | Roller 100, Roller 300 | A | |
| 085400Roller Shades CAD Drawing: Roller 100/150/300 Dual Left Sub-Bracket, Detail Drawing | Roller 100, Roller 300 | A | |
| 085403Roller Shades CAD Drawing: Roller 100/150/300 Dual Right Sub-Bracket, Detail Drawing | Roller 100, Roller 300 | A | |
| 085405Roller Shades CAD Drawing: Roller 100/150/300 Dual-Mount Shade in 7″ x 11″ Pocket, Elevation View | Roller 100, Roller 300 | A |
Documents used with 085404
Lutron drawing 085833 is the companion section view of the same dual mount shade and pocket. Lutron drawings 085400 and 085403 are the dual left and dual right sub-bracket detail drawings.
| Document | Type | Revision | Date |
|---|---|---|---|
| 086106Roller Shades Specification Submittal: Roller 100 | Specification Submittal | B | May 2017 |
| 045627ROLLER 100/150/300 – Pocket Mount Chassis Installation Guide | Installation Guide | A | Feb 2019 |
| 045211Roller Shades Installation Guide: Angled Coupler Chassis Addendum | Installation Guide | A | |
| Roller Shades Revit Family: Dual Roller 100/150/200 (Ceiling Mount) | Revit Family | ||
| Roller Shades Revit Family: Dual Roller 100/150/200 (Wall Mount) | Revit Family | ||
| Roller Shades Revit Family: Roller 100/150/200 (Pocket Mount) | Revit Family | ||
| Roller Shades Revit Family: Roller 100/150/200 (Wall Mount) | Revit Family | ||
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 085274Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
Revisions of 085404
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085404, and what to read next
Lutron drawing 085404 gives no shade widths, light gaps, bracket spacing, fastener sizes, fabric or drive data.
Publisher and citation for document 085404
Lutron Electronics Co., Inc. publishes document 085404, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085404 filled in.
