You searched and this document matched it.
See all results085267 · Specification Submittal · Rev D · Apr 2024 · English · PDF, 14 pages, 1.3 MB
Lutron Sivoia QS Roller Shades Specification Submittal: Roller 150 (085267, rev D)
Lutron's specification submittal for the Sivoia QS Roller 150, a roller shade carrying up to 150 sq ft (14 sq m) of fabric.
Lutron 085267 Rev D (April 2024), Sivoia QS Roller Shades Specification Submittal: Roller 150. https://assets.lutron.com/a/documents/085-267.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-shades-specification-submittal-085267/
About document 085267
Lutron document 085267, Rev D of April 2024, is the Roller 150 specification submittal: noise, speed and stopping accuracy, system capacity, shade options, bracket and coupling sub-bracket dimensions, QS link rules, wiring diagrams and warranty.
What submittal 085267 covers
Lutron document 085267 has these ten sections. Each link opens the PDF at that page in a new tab.
- Features, opens in a new tab page 1
- Specifications: power and system capacity, opens in a new tab page 2
- Performance, grouping, integration and controls, opens in a new tab page 2
- Shade options, opens in a new tab page 3
- Dimensions, opens in a new tab page 4
- Bracket options, opens in a new tab page 5
- Coupled roller system and coupling sub-brackets, opens in a new tab page 7
- QS link rules and smart panel wiring guide, opens in a new tab page 9
- System wiring diagrams, opens in a new tab page 10
- Limited warranty, opens in a new tab page 12
Specifications in 085267
Lutron document 085267 prints 55 values in the groups the document uses, each with the document's unit. A row names the catalog codes it applies to. The page link beside each group opens the PDF where the group starts.
- Operating voltage
- Low-voltage Class 2, 24 V DC
- Overvoltage protection
- Spike and brownout, plus or minus 10% of line voltage, for all devices
- ESD protection
- Provided by the power supply for all devices
- Power source
- Lutron approved NEC Class 2
System Capacity
PDF page 2 of 085267, opens in a new tab- Devices
- 100 in total (shades, seeTouch QS keypads, GRAFIK Eye QS, QS power supplies)
- Zones
- 100 in total (shades and GRAFIK Eye QS)
- Maximum fabric per EDU
- 150 sq ft (14 sq m)
- Noise
- 44 dBA maximum at 3 ft (1 m) from the EDU
- Hembar speed
- 3.6 in (91.44 mm) per second
- Power failure memory
- Lifetime of the product
Performance
PDF page 2 of 085267, opens in a new tab- Symmetrical light gaps
- As small as 0.75 in (19 mm) each side
- Stopping accuracy
- 0.125 in (3 mm) steps over the full travel
- Alignment of several EDUs
- Within 0.125 in (3 mm)
- Preset adjustment
- 5 second push and hold on a seeTouch QS keypad or GRAFIK Eye QS
- Limits
- Programmable from the EDUs, seeTouch QS keypads or GRAFIK Eye QS
Integration
PDF page 2 of 085267, opens in a new tab- Interfaces
- Contact closure, RS232 and ethernet
- Wall controls
- GRAFIK Eye QS shade columns or low-voltage seeTouch QS keypads, all on one communications link
Shade Options
PDF page 3 of 085267, opens in a new tab- Mounting
- Inside the window frame, outside the window frame, or in a pocket
- Drive side
- Left or right
- Fabric drop
- Regular roll or reverse roll
- Bottom bar
- Half-wrap or exposed; welded bottom bars also available
- Exposed bottom bar finishes
- White, bronze, anodized, custom color
- Fabric types
- Sheer, privacy, blackout
Dimensions
PDF page 4 of 085267, opens in a new tab- Printed bracket values (wall brackets shown)
- 2.0 in (50.8 mm), 3.0 in (76.2 mm)
- Complete assembly, value printed at each side
- 0.75 in (19 mm)
Wall mount bracket
PDF page 5 of 085267, opens in a new tab- A and B
- A 4.3 in (109 mm); B 5 in (127 mm)
Ceiling mount bracket
PDF page 5 of 085267, opens in a new tab- C to G
- C 4 in (102 mm); D 3.31 in (84 mm); E 0.0165 in (4 mm) as printed; F 5.2 in (132 mm); G 4.39 in (111 mm)
Jamb mount bracket
PDF page 5 of 085267, opens in a new tab- H to K
- H 5.125 in (130 mm); J 4.44 in (113 mm); K 4.69 in (119 mm)
Dual mount bracket
PDF page 6 of 085267, opens in a new tab- L to P
- L 7 in (178 mm); M 6.625 in (168 mm); N 8.25 in (210 mm); O 11 in (279 mm); P 1 in (25 mm)
Fascia mount bracket
PDF page 6 of 085267, opens in a new tab- Q
- 4.125 in (105 mm)
Pocket mount bracket
PDF page 6 of 085267, opens in a new tab- R and S
- R 4.75 in (121 mm); S 5 in (127 mm)
Coupled roller system
PDF page 7 of 085267, opens in a new tab- Panels coupled to one EDU
- Up to three
- Minimum light gap between panels
- 1.5 in (38 mm)
- Hembar alignment
- Within 0.125 in (3 mm)
- Bracket compatibility
- Any bracket configuration
- Adjustment tool
- Allen key, with the shades in place
Coupling sub-brackets
PDF page 8 of 085267, opens in a new tab- Wall mount, A and B
- A 5.2 in (132 mm); B 3 in (76 mm)
- Ceiling mount, A and C
- A 5.2 in (132 mm); C 3.08 in (78 mm)
- Jamb mount, D and E
- D 6.63 in (168 mm); E 4.22 in (107 mm)
- Fascia mount, F and G
- F 6.14 in (156 mm); G 4.05 in (103 mm)
- Pocket mount, H and I
- H 8.48 in (215 mm); I 4.17 in (106 mm)
Link Rules
PDF page 9 of 085267, opens in a new tab- Maximum devices
- 100Models: QSPS-P1-10-60
- Maximum zones
- 100
- Cable connecting all panels
- 2000 ft (600 m) maximumModels: QSPS-P1-10-60
- Cable to devices on each panel
- 2000 ft (600 m) maximumModels: QSPS-P1-10-60
- Communications cable
- At least one twisted, shielded pair for MUX
Wiring Guide
PDF page 9 of 085267, opens in a new tab- No shades, up to 8 seeTouch QS keypads
- 1200 ft (350 m) on 12 AWG (4 mm²); 500 ft (150 m) on 16 AWG (1.5 mm²); 300 ft (75 m) on 18 AWG (1 mm²), GRX-CBL-346S-500 cable
- 1 roller 64, roller 100, roller 150, roller 200CW or roller 225, up to 1 keypad
- 500 ft (150 m) on 12 AWG (4 mm²); 200 ft (60 m) on 16 AWG (1.5 mm²); 125 ft (35 m) on 18 AWG (1 mm²), GRX-CBL-346S-500 cable
- 2 roller 64 up to 30 sq ft (2.75 sq m) each, 3 roller 64 up to 20 sq ft (1.8 sq m) each, or 2 roller 100 up to 50 sq ft (4.6 sq m) each, no keypads
- 200 ft (60 m) on 12 AWG (4 mm²); 75 ft (20 m) on 16 AWG (1.5 mm²); 50 ft (15 m) on 18 AWG (1 mm²), GRX-CBL-346S-500 cable
System Wiring
PDF pages 10 and 11 of 085267, opens in a new tab- Panel supply
- 120 V~ 60 HzModels: QSPS-P1-10-60
- Wire Type A
- 4 conductor, twisted and shielded, listed for application
- GRAFIK Eye QS diagram
- Adds a GRAFIK Eye QS and an RS232 interface on the same link
Limited Warranty
PDF page 12 of 085267, opens in a new tab- Wall controls, interfaces and accessories
- 1 year from shipment
- EDU, fabric and shade hardware
- 8 years from shipment
- Replacement part credit
- 100% up to 5 years; 50% over 5 to 8 years; 0% after 8 years
Facts Lutron states in 085267
The values Lutron document 085267 states, as published:
- Maximum fabric per EDU
- 150 sq ft (14 sq m)
- Noise and speed
- 44 dBA maximum at 3 ft (1 m) from the EDU, hembar speed 3.6 in (91.44 mm) per second
- Alignment and light gap
- Shades stop and align within 0.125 in (3 mm)
- Symmetrical 0.75 in (19 mm) light gaps between fabric and window frame
- Operating voltage
- 24 V DC, low-voltage Class 2, from a Lutron approved NEC Class 2 source, with ±10% overvoltage and ESD protection
- System capacity
- 100 devices and 100 zones per system, counting shades, seeTouch QS keypads, GRAFIK Eye QS units and QS power supplies
- Coupled panels
- Up to three Roller 150 panels on one EDU
- 1.5 in (38 mm) minimum light gap between panels
- Bottom bars aligned with an allen key to within 0.125 in (3 mm)
- Shade options
- Inside, outside or pocket mount
- Drive on the left or right
- Regular or reverse roll
- Half-wrap or exposed bottom bar
- Bracket types
- Two-piece wall, ceiling, jamb, dual, fascia and pocket brackets, the dual mount carrying two fabrics, typically sheer and blackout
- Communications link
- Type A, 4 conductor twisted and shielded
- Up to 2000 ft (600 m) linking all QSPS-P1-10-60 panels
- Up to 2000 ft (600 m) from each panel to its devices
- Distance per panel output
- One Roller 150 plus up to one seeTouch QS keypad per output
- 500 ft (150 m) on 12 AWG (4 mm²)
- 200 ft (60 m) on 16 AWG (1.5 mm²)
- 125 ft (35 m) on 18 AWG (1 mm²)
- Warranty
- 8 years on the EDU, fabric and hardware
- 1 year on wall controls, interfaces and accessories
- Parts credited 100% to 5 years, 50% from 5 to 8
Questions about document 085267
The answers come from Lutron document 085267 and New Way's record of it.
What is Lutron document 085267?
Lutron's 14-page Roller 150 submittal, dated 4 April 2024 in every page footer.
- Six two-piece brackets with lettered dimensions
- Five coupling sub-brackets
- Two system wiring diagrams, with and without GRAFIK Eye QS
Which revision of 085267 is current?
Rev D, dated April 2024, is the revision Lutron publishes. New Way checked it against assets.lutron.com on 15 October 2026.
Which roller shades does 085267 cover?
Lutron Sivoia QS roller shades.
How much fabric can a Roller 150 drive carry?
Lutron document 085267 rates the Roller 150 EDU at up to 150 sq ft (14 sq m) of fabric.
- Hembar speed: 3.6 in (91.44 mm) per second
- Noise: 44 dBA maximum at 3 ft (1 m)
Can Roller 150 panels be coupled?
Lutron document 085267 allows up to three Roller 150 panels on one EDU, with a 1.5 in (38 mm) minimum light gap between panels.
A phase adjustment, turned with an allen key while the shades hang, lines the bottom bars up within 0.125 in (3 mm).
How many devices fit on one QS link, and how far?
Lutron document 085267 caps a link at 100 devices, 100 zones and 2000 ft (600 m) between smart panels.
- Per output, one Roller 150 plus up to one seeTouch QS keypad
- 500 ft (150 m) on 12 AWG (4 mm²), 200 ft (60 m) on 16 AWG (1.5 mm²)
- 125 ft (35 m) on 18 AWG (1 mm²)
Which brackets are available for the Roller 150?
Lutron document 085267 draws two-piece wall, ceiling, jamb, dual, fascia and pocket brackets, each with lettered dimensions.
Lutron adds wall, ceiling, jamb, fascia and pocket coupling sub-brackets. The dual mount hangs a sheer and a blackout, the fabric unrolling nearest the glass.
What feeds power and communication to a Roller 150?
Lutron document 085267 shows each Roller 150 on its own output of a QSPS-P1-10-60 10-output smart panel.
The panel is supplied at 120 V~ 60 Hz. Lutron joins panels, shades and seeTouch QS keypads with Type A cable, 4 conductors twisted and shielded.
Other Sivoia QS specification submittals
Specification submittals for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 086107Roller Shades Specification Submittal: Roller 200CW | A | ||
| 0853144-Group RF Remote Control Specification Submittal | C | May 2016 | |
| 085274Hard Wired Power Supply Specification Submittal | D | Aug 2014 | |
| 369847Pico Wireless Control, 4-Button Specification Submittal | K | Mar 2024 |
Documents used with 085267
Lutron document 086107 is the Sivoia QS Roller 200CW specification submittal beside this Roller 150 submittal. Lutron document 085267 sends readers to lutron.com/sivoiaqs for the wiring guides covering other roller tube sizes.
| Document | Type | Revision | Date |
|---|---|---|---|
| CAD Drawing: Shade Equipment CAD Block | CAD Drawing | ||
| 085612Roller 100 CAD Drawing: 4.75″ x 5″ (121 x 127mm) Pocket, Detail Drawing | CAD Drawing | A | |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
| 0454114-Group RF Remote Control Installation Guide | Installation Guide | D | Jan 2015 |
| 045520Basic Wiring and Setup Installation Guide | Installation Guide | B | Nov 2016 |
| 045000710 Output Power Panel Power Supply (12 V) Installation Guide | Installation Guide | A | Jul 2025 |
| 04562030-Output Configurable Power Panel Enclosure, 35V Output Installation Guide | Installation Guide | B | Jan 2018 |
| Roller Shades Wiring Diagram: Multiple Shades per Single QS Smart Panel | Wiring Diagram |
Revisions of 085267
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| D | Apr 2024 | Current. The file on assets.lutron.com. Checked 15 Oct 2026. |
Not covered in 085267, and what to read next
Lutron document 085267 gives no installation steps, limit setting, programming, or wire gauge distances for other roller tube sizes.
- Other tube sizes: the wiring guides at lutron.com/sivoiaqs
- Roller 200CW: 086107, the Sivoia QS Roller 200CW specification submittal
Publisher and citation for document 085267
Lutron Electronics Co., Inc. publishes document 085267, Rev D, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 15 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085267 filled in.
