You searched and this document matched it.
See all results085572 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Serena Roller Shades CAD Drawing: Wired, Fabric Wrapped Fasica Mount, Elevation View (085572)
Lutron's elevation view of a Serena or Triathlon wired roller shade with a fabric wrapped fascia mount, for shop drawings.
Lutron 085572 Rev A, Serena Roller Shades CAD Drawing: Wired, Fabric Wrapped Fasica Mount, Elevation View. https://assets.lutron.com/a/documents/085572.pdf, via https://newwaykl.com/resources/lutron/roller-shades/triathlon/lutron-serena-roller-shades-cad-drawing-085572/
About document 085572
Lutron drawing 085572, revision A, is the one-page CAD elevation of the wired shade with a fabric wrapped fascia mount: minimum width, height and light gap, a mounting note and a clearance note.
What drawing 085572 covers
Lutron document 085572 has these five sections, all on its one page.
- Elevation with minimum width, height and light gap
- Legend (top view), view markers 1 and 2
- Mounting configuration note
- Clearance and adjustment note
- Title block
Specifications in 085572
Lutron document 085572 prints 13 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
View 2, elevation
PDF page 1 of 085572, opens in a new tab- Minimum width of shade
- 20.75 in (527 mm)
- Minimum shade height
- 12 in (305 mm)
- Minimum light gap
- 0.625 in (16 mm)
- Unlabeled dimension
- 4.50 in (114 mm)
- Configurations the bracket supports
- Wall or ceiling (wall mount shown)
- Clearances
- Provided by the factory; kept by the installer if adjustment features are used
- Adjustments at maximum roll diameter
- Not all available
Sheet heading
PDF page 1 of 085572, opens in a new tab- Configuration
- Wired, fabric wrapped fascia mount
Title block
PDF page 1 of 085572, opens in a new tab- Product
- Serena/Triathlon
- Number as printed
- 085572
- Scale
- 3/8
- View
- 2
- Revision
- A
Facts Lutron states in 085572
The values Lutron document 085572 states, as published:
- What the drawing shows
- An elevation of a Serena or Triathlon wired roller shade with a fabric wrapped fascia mount, wall mount shown
- Minimum width of shade
- 20.75 in (527 mm)
- Minimum shade height
- 12 in (305 mm)
- Minimum light gap
- 0.625 in (16 mm)
- Mounting configurations
- Lutron's bracket supports wall or ceiling mounting
- Mount drawn
- Wall mount
- Clearances as supplied
- A shade installed as Lutron's factory supplies it has the clearances it needs to operate
- Adjustment features
- The installer is responsible for keeping the clearances if the adjustment features are used
- Adjustment at full roll
- Lutron notes that not all adjustments are available at the maximum roll diameter
- Title block
- Serena/Triathlon, 085572, scale 3/8, view 2, revision A
- Files
- PDF, with DWG and DXF versions of the same drawing
Questions about document 085572
The answers come from Lutron document 085572 and New Way's record of it.
What is Lutron drawing 085572?
Lutron drawing 085572 is view 2 at scale 3/8, revision A, published as PDF, DWG and DXF files. Lutron adds a legend drawn as a top view with view markers 1 and 2.
Which revision of 085572 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085572 cover?
Lutron Triathlon roller shades.
What are the minimum shade width and height?
Lutron drawing 085572 prints a minimum width of shade of 20.75 in (527 mm) and a minimum shade height of 12 in (305 mm). Lutron gives no maximum sizes on the sheet.
Can the bracket be fixed to the ceiling instead of the wall?
Lutron's note on drawing 085572 says the bracket supports wall or ceiling mounting. Lutron draws the wall mount on the elevation.
What happens to the clearances if the bracket is adjusted?
Lutron drawing 085572 states that a shade fitted as supplied has the clearances it needs to run. Lutron makes the installer responsible for keeping them once the adjustment features are used.
Some adjustments are unavailable at the maximum roll diameter.
What light gap does the elevation show?
Lutron drawing 085572 dimensions a minimum light gap of 0.625 in (16 mm). Lutron prints no maximum light gap on the sheet.
Which dimensions does Lutron label on the elevation?
Lutron labels three values on drawing 085572: minimum width of shade, minimum shade height and minimum light gap. Lutron's matching section view of the same shade is drawing 085571.
Other Triathlon CAD drawings
CAD drawings for the same Triathlon system:
All 13 Triathlon CAD drawingsDocuments used with 085572
Lutron drawings 085571 (section), 085568 (battery, fabric wrapped fascia elevation) and 085570 (wired, no top treatment elevation) are related views. Lutron specification submittals 085312 (Serena) and 085333 (Triathlon) cover the shades; 045868 is the Serena wired roller drive replacement guide.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085312Serena Roller Shades Specification Submittal | Specification Submittal | K | Sep 2025 |
| 085333Roller Shades Specification Submittal | Specification Submittal | B | |
| 045868Serena & Wired Roller – Drive Replacement Instructions Installation Guide | Installation Guide | A | Jun 2021 |
| 085314Sivoia QS 4-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| 369847Sivoia QS Pico Wireless Control, 4-Button Specification Submittal | Specification Submittal | K | Mar 2024 |
| 0450010Serena & Battery Roller – Drive Replacement Instructions Installation Guide | Installation Guide | A | Oct 2025 |
| 045956Serena Battery-Powered Roller Shade Installation Guide | Installation Guide | B | Aug 2025 |
| Roller Shades Revit Family | Revit Family | ||
| 085276Serena 10 Output Power Panel Power Supply (12 V) Specification Submittal | Specification Submittal | C | May 2016 |
| 085283Serena Individual Plug-In Power Supply Specification Submittal | Specification Submittal | D | Nov 2018 |
Revisions of 085572
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085572, and what to read next
Lutron drawing 085572 carries no head section, tube size, wiring or installation steps.
Publisher and citation for document 085572
Lutron Electronics Co., Inc. publishes document 085572, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron, Triathlon and Serena are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Triathlon?
New Way supplies and installs Lutron Triathlon shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085572 filled in.
