You searched and this document matched it.
See all results085380 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Commercial Contract Manual CAD Drawing: Contract Roller Motorized, Dual Shade with Recessed Pocket, Ceiling Mount, Section View (085380)
Lutron's CAD section of the Contract Roller Motorized dual shade, ceiling mounted in a recessed pocket 7.00 in (178 mm) deep.
Lutron 085380 Rev A, Commercial Contract Manual CAD Drawing: Contract Roller Motorized, Dual Shade with Recessed Pocket, Ceiling Mount, Section View. https://assets.lutron.com/a/documents/085380.pdf, via https://newwaykl.com/resources/lutron/roller-shades/manual/lutron-commercial-commercial-contract-manual-cad-drawing-085380/
About document 085380
Lutron document 085380, revision A, is a one-page CAD section at scale 1/2, view 1, with the pocket depth, height and flap, the tube sizes, maximum roll-up, tube center dimensions and the sub-bracket.
What drawing 085380 covers
Lutron document 085380 has these ten sections, all on its one page.
- Section view 1, ceiling mount in recessed pocket
- Pocket depth, pocket height and pocket flap
- Sub-bracket and ceiling fasteners
- Tube diameter, tube options and maximum roll-up
- Tube center dimensions
- Two dimensions printed without labels
- Hembar (varies)
- Legend (top view) and the mounting configuration note
- Clearance note on factory clearances and site adjustment
- Title block, code CMR-C, revision A
Specifications in 085380
Lutron document 085380 prints 18 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Pocket depth
- 7.00 in (178 mm)
- Pocket height
- 11.00 in (279 mm)
- Pocket flap
- 2.89 in (73 mm)
- Tube center
- 8.31 in (210 mm)
- Tube center
- 3.31 in (84 mm)
- Tube center
- 4.31 in (109 mm)
- Tube center
- 4.31 in (109 mm)
- Tube diameter
- Ø2.56 in (65 mm)
- Tube diameter, optional
- Ø2.65 in (67 mm) or Ø3.00 in (77 mm)
- Max rollup
- Ø3.85 in (98 mm)
- Unlabeled dimension
- 1.38 in (35 mm)
- Unlabeled dimension
- 2.38 in (60 mm)
- Hembar
- Varies
- Mounting
- Ceiling mount shown; bracket supports ceiling or wall mounting
- Code
- CMR-C
- Scale
- 1/2
- View
- 1
- Revision
- A
Facts Lutron states in 085380
The values Lutron document 085380 states, as published:
- Pocket depth
- 7.00 in (178 mm)
- Pocket height
- 11.00 in (279 mm)
- Pocket flap
- 2.89 in (73 mm)
- Tube diameter
- Ø2.56 in (65 mm), with optional Ø2.65 in (67 mm) or Ø3.00 in (77 mm) tubes
- Maximum roll-up
- Ø3.85 in (98 mm)
- Tube center
- 8.31 in (210 mm)
- 3.31 in (84 mm)
- 4.31 in (109 mm), printed twice
- Unlabeled dimensions
- 1.38 in (35 mm) and 2.38 in (60 mm)
- Fixing
- Sub-bracket and ceiling fasteners labeled, no fastener size or type printed
- Mounting
- Ceiling mount drawn, with a note that the bracket also supports wall mounting
- Clearances
- As supplied by the factory, the shade has the clearances it needs
- After adjustment features are used, proper clearances are the installer's job
- Some adjustments are not available at the maximum roll diameter
- Title block
- Code CMR-C, scale 1/2, view 1, revision A, no date printed
- File formats
- PDF, DWG and DXF
Questions about document 085380
The answers come from Lutron document 085380 and New Way's record of it.
What is Lutron document 085380?
Lutron's one-page CAD section of the dual shade in a recessed pocket, code CMR-C, published as PDF, DWG and DXF.
Which revision of 085380 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085380 cover?
Lutron Manual roller shades in the Commercial Contract Manual drive class.
What pocket size does Lutron drawing 085380 give?
Lutron document 085380 labels a pocket depth of 7.00 in (178 mm) for the motorized dual shade.
- Pocket height: 11.00 in (279 mm)
- Pocket flap: 2.89 in (73 mm)
Which tubes and roll-up does Lutron drawing 085380 show?
Lutron document 085380 draws a Ø2.56 in (65 mm) tube and a maximum roll-up of Ø3.85 in (98 mm).
- Optional tube: Ø2.65 in (67 mm)
- Optional tube: Ø3.00 in (77 mm)
Which tube center dimensions does Lutron drawing 085380 print?
Lutron document 085380 labels four tube center dimensions. Drawing 085380 does not say what each is measured from, so read the references off the DWG or DXF.
- 8.31 in (210 mm)
- 3.31 in (84 mm)
- 4.31 in (109 mm), printed twice
How is the sub-bracket fixed in Lutron drawing 085380?
Lutron document 085380 labels a sub-bracket and ceiling fasteners, and notes that the bracket also supports wall mounting. Drawing 085380 prints no fastener size or type.
Does Lutron drawing 085380 fix the hembar style?
Lutron document 085380 marks the hembar as varies, so the sheet does not fix a hembar style or size.
Other Manual Commercial Contract Manual CAD drawings
CAD drawings for the same Manual Commercial Contract Manual drive class:
All 20 Manual roller shade CAD drawingsDocuments used with 085380
Lutron documents 085375 and 085376 are the manual dual-shade recessed pocket sections, and 085378 the motorized single-shade one. Lutron document 085636 is the motorized dual-shade fascia and back cover section, and 085819 the motorized dual recessed pockets section.
Revisions of 085380
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085380, and what to read next
Lutron document 085380 gives no fastener sizes, no shade widths and no installation steps.
Publisher and citation for document 085380
Lutron Electronics Co., Inc. publishes document 085380, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron is a trademark of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Manual roller shades?
New Way supplies and installs Lutron Manual roller shades in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085380 filled in.
