You searched and this document matched it.
See all results085584 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Palladiom Roller Shades CAD Drawing: Wired Shade, Jamb Mount, Elevation View (085584)
Lutron's jamb mount elevation view CAD drawing of the wired Palladiom roller shade, with its minimum size and light gap.
Lutron 085584 Rev A, Palladiom Roller Shades CAD Drawing: Wired Shade, Jamb Mount, Elevation View. https://assets.lutron.com/a/documents/palladiom_shade_jamb_mount_elevation_view_085584.pdf, via https://newwaykl.com/resources/lutron/roller-shades/palladiom/lutron-palladiom-roller-shades-cad-drawing-085584/
About document 085584
Lutron drawing 085584, Rev A, is the elevation of a single wired Palladiom shade on a jamb mount: minimum width and height, minimum light gap, one unlabeled dimension, top view legend and the clearance note.
What drawing 085584 covers
Lutron document 085584 has these eight sections, all on its one page.
- Elevation view of a jamb mount shade
- Minimum width of shade
- Minimum shade height
- Minimum light gap
- One unlabeled dimension
- Legend (top view)
- Clearance note
- Title block: scale 1/4, view 2, revision A
Specifications in 085584
Lutron document 085584 prints eight values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Minimum width of shade
- 20.00 in (508 mm)
- Minimum shade height
- 12.00 in (305 mm)
- Minimum light gap
- 0.50 in (13 mm)
- Unlabeled dimension
- 2.00 in (51 mm)
title block
PDF page 1 of 085584, opens in a new tab- Drawing number
- 085584
- Scale
- 1/4
- View
- 2
- Revision
- A
Facts Lutron states in 085584
The values Lutron document 085584 states, as published:
- What the drawing shows
- An elevation of a Palladiom shade fitted between the window jambs, titled jamb mount shade. A top-view legend is marked 1 and 2.
- Minimum width of shade
- 20.00 in (508 mm)
- Minimum shade height
- 12.00 in (305 mm)
- Minimum light gap
- 0.50 in (13 mm)
- Unlabeled dimension
- 2.00 in (51 mm)
- Clearance responsibility
- A shade installed as the factory supplies it has the clearances it needs to operate. The master technician keeps those clearances after installation.
- View and scale
- View 2, scale 1/4
- Revision and date
- Revision A, no date printed
- File formats
- PDF, DWG and DXF
Questions about document 085584
The answers come from Lutron document 085584 and New Way's record of it.
What is Lutron document 085584?
Lutron's one-sheet jamb mount elevation of the wired Palladiom shade, view 2 at scale 1/4, with no date printed. Lutron drawings 085581 and 085602 are the matching jamb mount section and plan views.
Lutron publishes the elevation as PDF, DWG and DXF.
Which revision of 085584 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085584 cover?
Lutron Palladiom roller shades.
What is the minimum width of a jamb-mounted Palladiom shade?
Lutron drawing 085584 prints a minimum width of shade of 20.00 in (508 mm).
What minimum shade height does Lutron drawing 085584 give?
Lutron drawing 085584 prints a minimum shade height of 12.00 in (305 mm).
What light gap does Lutron drawing 085584 show for the jamb mount?
Lutron drawing 085584 prints a minimum light gap of 0.50 in (13 mm).
Who is responsible for the clearances after installation?
Lutron drawing 085584 notes that a shade installed as supplied by the factory has the clearances it needs to operate. Lutron places the duty of keeping those clearances after installation on the master technician.
What does the 2.00 in (51 mm) dimension measure?
Lutron drawing 085584 prints the 2.00 in (51 mm) dimension without a label, so the sheet does not say what it measures. Lutron's PDF shows where the dimension line sits, so check the line on the sheet before using the value.
Other Palladiom CAD drawings
CAD drawings for the same Palladiom system:
All 38 Palladiom CAD drawingsDocuments used with 085584
Lutron drawing 085602 is the matching plan view, 085581 the matching section view and 085588 the jamb bracket detail. Lutron drawings 085583 and 085585 are the wall and ceiling mount elevations, and 085560 the specification submittal.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085560Roller Shades Specification Submittal | Specification Submittal | M | Jun 2025 |
| 045694Roller Shades Installation Guide: Shades Replacement Roller | Installation Guide | A | Apr 2019 |
| 045770Roller Shades Installation Guide: Wire Housing | Installation Guide | A | May 2019 |
| Roller Shades Revit Family: Jamb Mount | Revit Family | ||
| Roller Shades Revit Family: Ceiling Mount | Revit Family | ||
| Roller Shades Revit Family: Dual Shades, Ceiling Mount | Revit Family | ||
| Roller Shades Revit Family: Dual Shades, Wall Mount | Revit Family | ||
| Roller Shades Revit Family: Wall Mount | Revit Family | ||
| 085274Sivoia QS Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| 048846Sivoia QS Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
Revisions of 085584
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085584, and what to read next
Lutron drawing 085584 gives no reveal depth, bracket dimensions or installation steps.
Publisher and citation for document 085584
Lutron Electronics Co., Inc. publishes document 085584, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Palladiom are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Palladiom?
New Way supplies and installs Lutron Palladiom shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085584 filled in.
