You searched and this document matched it.
See all results085560 · Specification Submittal · Rev M · Jun 2025 · English · PDF, 12 pages, 8.5 MB
Lutron Palladiom Roller Shades Specification Submittal (085560, rev M)
Lutron's specification submittal for the Palladiom exposed motorized roller shade, on solid aluminum or brass brackets.
Lutron 085560 Rev M (June 2025), Palladiom Roller Shades Specification Submittal. https://assets.lutron.com/a/documents/palladiom_shading_system_spec_submittal.pdf, via https://newwaykl.com/resources/lutron/roller-shades/palladiom/lutron-palladiom-roller-shades-specification-submittal-085560/
About document 085560
Lutron document 085560, Rev M of June 2025, is the Palladiom specification submittal for the Sivoia QS Palladiom drive: size limits, light gaps, sound, power, deductions, bottom bars, brackets, finishes and wire management.
What submittal 085560 covers
Lutron document 085560 has these eleven sections. Each link opens the PDF at that page in a new tab.
- Features, opens in a new tab page 1
- Power and communication, opens in a new tab page 1
- Accessories and structural mounting requirement, opens in a new tab page 1
- Specifications: power, configuration, capacity, environment, precision, opens in a new tab page 2
- Compatible systems, controls and integration, opens in a new tab page 2
- Dimensions, measurements and deductions, opens in a new tab page 3
- Shade options, opens in a new tab page 4
- Mounting options: end, center and jamb brackets, opens in a new tab page 5
- Aesthetic enhancements: wire routing, finishing rings, screw covers, opens in a new tab page 10
- Bracket, shim and accessory finish guide, opens in a new tab page 11
- Wire management: wire housing and spackle ring, opens in a new tab page 12
Specifications in 085560
Lutron document 085560 prints 67 values in the groups the document uses, each with the document's unit. A row names the catalog codes it applies to. The page link beside each group opens the PDF where the group starts.
- Maximum width
- 12 ft (3.66 m), single shade
- Maximum height
- 14 ft (4.27 m), single shade
- Light gap
- Symmetrical, as small as 1/2 in (12 mm)
- Alignment
- Within 1/8 in (3 mm) at all times, shades moving in unison
- Sound
- 35 dBA measured 3 ft (0.91 m) from the EDU
- Bottom bar speed
- 3.6 in/sec (91.4 mm/sec)
- Brackets
- Solid aluminum or brass, concealed fasteners
- Fabric types
- Sheer, translucent and room darkening
- Power failure memory
- Lifetime of the product
- Configurations
- QS Wired and QS Wireless
- Idler extension
- 1/8 in (3 mm) for installation tolerance
Power and Communication
PDF page 1 of 085560, opens in a new tab- Individual plug-in supplies
- QSPS-P1-1-35V, QSPS-P2-1-35V, QSPS-P3-1-35VModels: QSPS-P1-1-35V, QSPS-P2-1-35V, QSPS-P3-1-35V
- 10-output power panels
- QSPS-10PNL, QSPSY-10PNLModels: QSPS-10PNL, QSPSY-10PNL
- Configurable power panels
- QSPS-10PNL-NPM, QSPS-30PNL-NPM, each with WIN-PS-5CC-R installedModels: QSPS-10PNL-NPM, QSPS-30PNL-NPM, WIN-PS-5CC-R
- Individual junction box supply
- QSPS-J-1-35VModels: QSPS-J-1-35V
- Cable
- Low-voltage power and communication in one 4-wire cable
- Shade connector wire range
- 16 AWG to 24 AWG (0.25 mm² to 1.5 mm²), solid or stranded; stranded recommended with the WIN-WM-BOX-10 wire housingModels: WIN-WM-BOX-10
- Structural load per bracket
- 400 lbs (181 kg), mounted to blocking or suitable structural material
Low Voltage Power
PDF page 2 of 085560, opens in a new tab- Operating voltage
- Class 2, 35 V DC
- Overvoltage and ESD protection
- +/-10% of line voltage overvoltage protection and ESD protection, both provided by the power supply
- Power source
- Lutron NEC Class 2 power source
Flexible Configuration
PDF page 2 of 085560, opens in a new tab- Limit adjustment
- Locally via controls on the EDU, or remotely via wired controls or a system; no wired relays or wired group controllers required
System Capacity
PDF page 2 of 085560, opens in a new tab- Standalone QS devices
- 100
- Standalone QS zones
- 100
Environment
PDF page 2 of 085560, opens in a new tab- Temperature
- 32 °F to 104 °F (0 °C to 40 °C)
- Humidity
- 0% to 90%, non-condensing
Precision Control
PDF page 2 of 085560, opens in a new tab- Preset positions
- Programmable at any point between the open and close limits
- Stopping accuracy
- Within 1/8 in (3 mm) of programmed open, close and preset positions
- Intelligent Hembar Alignment (IHA)
- Within 1/8 in (3 mm), stopped or moving
Compatible Systems and Controls
PDF page 2 of 085560, opens in a new tab- Local controls
- GRAFIK Eye QS shade columns; seeTouch QS keypads
- QS wired systems
- HomeWorks QSX, HomeWorks QS, myRoom Plus, myRoom XC, Athena, Quantum
- QS Wireless systems and controls
- HomeWorks QSX, HomeWorks QS, RadioRA 3, RadioRA 2, RA 2 Select, Caséta (Smart Hub PRO), Pico Wireless Control, 4-Group Remote ControlModels: QSYC-x-RCVR, QSYC-ADAPTER
- Radio Window sensors
- In a HomeWorks or Quantum system
Integration
PDF page 2 of 085560, opens in a new tab- A/V integration
- Contact closure, RS232 and Ethernet
Measurements & Deductions
PDF page 3 of 085560, opens in a new tab- Outside mount, bracket-to-bracket
- No deduction
- Inside mount, single and 2-shade
- 1/16 in (1.6 mm)
- Inside mount, 3 or more shades
- 1/16 in (1.6 mm) on first and last shade; intermediate shades none
- Maximum fabric deduction
- 1/4 in (6 mm) per side, light gap 3/4 in (19 mm) per side
Shade Options
PDF page 4 of 085560, opens in a new tab- Mounting
- Inside mount or outside mount
- Drive side
- Left side or right side
- Fabric drop
- Regular roll or reverse roll; reverse roll recommended for dual-sided fabric
- Bottom bars
- Palladiom Bottom Rail; half-wrap architectural with metal endcaps; half-wrap architectural with plastic endcaps; Designer; Sealed in 3/16 x 1 in (5 x 25 mm) or 7/16 x 1 3/8 in (11 x 35 mm)
- Palladiom Bottom Rail finishes
- Pure White, Clear Anodized, Black Anodized, Satin Nickel
- Half-wrap bar with metal endcaps, finishes
- Pure White, Clear Anodized, Black Anodized, Satin Nickel, Brass, Satin Graphite, Aged Bronze
Mounting Options - End Brackets
PDF pages 5 and 6 of 085560, opens in a new tab- Standard end bracket, maximum fabric roll-up
- 3 in (76 mm)Models: WIN-BRK-LLA, WIN-BRK-LLB
- Standard end bracket, drawing values (unlabeled)
- 3.00 in (76 mm), 2.00 in (51 mm), 1.45 in (37 mm)Models: WIN-BRK-LLA, WIN-BRK-LLB
- Extended end bracket, maximum fabric roll-up
- 3 1/2 in (89 mm)Models: WIN-BRK-LLEA, WIN-BRK-LLEB
- Extended end bracket, drawing values (unlabeled)
- 3.25 in (83 mm), 2.00 in (51 mm), 1.45 in (37 mm)Models: WIN-BRK-LLEA, WIN-BRK-LLEB
- Shims
- 1 included with each bracket; end bracket shim sold separately in packs of 10Models: WIN-SHIM-LWC
- Configurations A and B
- A: left side in a wall mount, right side in a ceiling mount; B: right side in a wall mount, left side in a ceiling mount
- Pre-routed wiring harness
- Facing up in a wall mount; facing back towards the wall or window in a ceiling mount
Mounting Options - Center Brackets
PDF pages 7 and 8 of 085560, opens in a new tab- Standard center bracket, maximum fabric roll-up
- 3 in (76 mm); one bracket supports 2 shades, not coupled; center bracket shim sold separately in packs of 10Models: WIN-BRK-LTO, WIN-SHIM-LT
- Standard center bracket, drawing values (unlabeled)
- 3.00 in (76 mm), 2.00 in (51 mm), 1.90 in (48 mm)Models: WIN-BRK-LTO
- Extended center bracket, maximum fabric roll-up
- 3 1/2 in (89 mm); one bracket supports 2 shades, not coupledModels: WIN-BRK-LTEO
- Extended center bracket, drawing values (unlabeled)
- 3.25 in (83 mm), 2.00 in (51 mm), 1.90 in (48 mm)Models: WIN-BRK-LTEO
- Center bracket orientation
- Universal; pre-routed wire harnesses face up towards the ceiling in a wall mount and back towards the nearest wall in a ceiling mountModels: WIN-BRK-LTO, WIN-BRK-LTEO
Mounting Options - Jamb Bracket
PDF page 9 of 085560, opens in a new tab- Jamb bracket, maximum fabric roll-up
- 3 1/2 in (89 mm), inside mount; jamb bracket shim sold separately in packs of 10Models: WIN-BRK-LJ, WIN-SHIM-LJ
- Jamb bracket, drawing values (unlabeled)
- 2.00 in (51 mm), 1.86 in (47 mm)Models: WIN-BRK-LJ
Aesthetic Enhancements
PDF page 10 of 085560, opens in a new tab- Finishing ring
- 1 per bracket in matching finish; 2 with the center bracketModels: WIN-RING
- Screw cover
- 1 per bracket in matching finish; 2 with the center bracket; none for the jamb bracketModels: WIN-BC-LWC, WIN-BC-LT
Bracket, Shim, and Accessory Finish Guide
PDF page 11 of 085560, opens in a new tab- Aluminum finishes and codes
- Pure White PWH, Clear Anodized CLA, Black Anodized BLA, Satin Nickel SN, Brass BRS, Satin Graphite SGT
- Finish and code on brass brackets
- Aged Bronze AZ, bracket codes WIN-BKT
- Suggested shim match
- Satin Nickel uses CLA shims; Satin Graphite and Aged Bronze use BLA shimsModels: WIN-SHIM-LWC, WIN-SHIM-LT, WIN-SHIM-LJ
Wire Management
PDF page 12 of 085560, opens in a new tab- Wire housing, package of 10, drawing values (unlabeled)
- 1.20 in (30.5 mm), 0.62 in (16 mm), 3.50 in (89 mm), 0.78 in (20 mm)Models: WIN-WM-BOX-10
- Wire housing position
- Inside the wall or trim, beneath the bracket or concealed with the spackle ring and plugModels: WIN-WM-BOX-10
- Spackle ring and plug, 10 rings and 10 plugs, drawing values (unlabeled)
- 1.00 in (25 mm), 3.50 in (89 mm)Models: WIN-WM-SR-10
- Spackle ring position
- Behind the fabric roll, where conditions allowModels: WIN-WM-SR-10
Facts Lutron states in 085560
The values Lutron document 085560 states, as published:
- Maximum single shade size
- 12 ft (3.66 m) wide and 14 ft (4.27 m) tall
- Light gaps
- Symmetrical, as small as 1/2 in (12 mm)
- Tall narrow shades: fabric deduction up to 1/4 in (6 mm) per side
- Light gap then up to 3/4 in (19 mm) per side
- Sound
- 35 dBA at 3 ft (0.91 m) from the EDU
- Speed
- The bottom bar travels at 3.6 in/sec (91.4 mm/sec)
- Alignment
- Shades move in unison within 1/8 in (3 mm) and stop within 1/8 in (3 mm) of programmed open, close and preset positions
- Power
- Class 2, 35 V DC from a Lutron NEC Class 2 source
- Power and communication on one 4-wire cable
- Shade connector: 16 AWG to 24 AWG (0.25 mm² to 1.5 mm²), solid or stranded
- Stranded recommended with the WIN-WM-BOX-10 wire housing
- Compatible power sources
- Plug-in: QSPS-P1-1-35V, QSPS-P2-1-35V, QSPS-P3-1-35V
- 10-output panels: QSPS-10PNL, QSPSY-10PNL
- Configurable panels: QSPS-10PNL-NPM, QSPS-30PNL-NPM, with WIN-PS-5CC-R
- Junction box: QSPS-J-1-35V
- Bracket load
- Each shade bracket must support 400 lbs (181 kg), on fasteners the installer chooses, into blocking or other structural material
- Environment
- 32 °F to 104 °F (0 °C to 40 °C), humidity 0% to 90% non-condensing
- Standalone QS capacity
- 100 QS devices and 100 QS zones
- Inside-mount width deductions
- None on an outside mount
- Inside-mount single and 2-shade systems: 1/16 in (1.6 mm)
- 3 or more shades: 1/16 in (1.6 mm) on the first and last only
- Idler tolerance
- The idler extends 1/8 in (3 mm) for installation tolerance, which widens the bracket-to-bracket width and the idler-side light gap
- Bottom bar options
- Palladiom Bottom Rail
- Half-wrap architectural bar, metal or plastic endcaps
- Designer
- Sealed, 3/16 x 1 in (5 x 25 mm) or 7/16 x 1 3/8 in (11 x 35 mm)
- Bracket roll-up limits and finishes
- Maximum fabric roll-up
- Standard end and center brackets: 3 in (76 mm)
- Extended end and center brackets, jamb bracket: 3 1/2 in (89 mm)
- 7 standard finishes: Pure White, Clear Anodized, Black Anodized, Satin Nickel, Brass, Satin Graphite, Aged Bronze
Questions about document 085560
The answers come from Lutron document 085560 and New Way's record of it.
What is Lutron document 085560?
Lutron's 12-page Palladiom roller shade specification submittal, footer-dated 06.04.25 under part number 085560m.
Lutron document 085560 cites no other document, only its own pages 10 to 12 and a design options web page.
Which revision of 085560 is current?
Rev M, dated June 2025, is the revision Lutron publishes. New Way checked it against assets.lutron.com on 15 October 2026.
Which roller shades does 085560 cover?
Lutron Palladiom roller shades.
How large can a single Lutron Palladiom roller shade be?
Lutron document 085560 states a single Palladiom shade can be up to 12 ft (3.66 m) wide and up to 14 ft (4.27 m) tall. Lutron document 085560 adds that tall, narrow shades may receive a fabric deduction to offset the higher chance of telescoping.
What power does a Palladiom shade need?
Class 2, 35 V DC from a Lutron NEC Class 2 source, per Lutron document 085560.
- Power and communication share one 4-wire cable
- Supplies: plug-in, 10-output panel, configurable panel and junction box
- Shade connector: 16 AWG to 24 AWG (0.25 mm² to 1.5 mm²)
What width deductions apply to an inside-mount Palladiom shade?
Lutron document 085560 deducts 1/16 in (1.6 mm) from the bracket-to-bracket width of inside-mount single and 2-shade systems.
No deduction applies to outside mounts. In a system of 3 or more shades, the 1/16 in (1.6 mm) comes off the first and last shade only.
What must Palladiom brackets be fixed to?
Lutron document 085560 requires Palladiom shades to be mounted to blocking or other suitable structural material.
The installer chooses fasteners so each shade bracket can support 400 lbs (181 kg). Lutron document 085560 includes one shim with each bracket for leveling or projection.
What light gap does a Palladiom shade have?
Lutron document 085560 gives symmetrical light gaps as small as 1/2 in (12 mm).
- Tall, narrow shades: fabric deduction up to 1/4 in (6 mm) per side
- Gap then widens to 3/4 in (19 mm) per side
- No bare tube shows: a finished sleeve matches the bracket
Other Palladiom specification submittals
Specification submittals for the same Palladiom system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085274Sivoia QS Hard Wired Power Supply Specification Submittal | D | Aug 2014 | |
| 085593Sivoia QS Configurable Power Panel, 10 Output Specification Submittal | Roller 20 to 300 | B | Dec 2018 |
Documents used with 085560
Lutron documents 045779 and 045684 are the spackle ring and plug and the wireless receiver adapter guides. CAD drawings 085580 (wall mount section) and 085650 (wire housing detail) give the matching views for detailing.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045779Roller Shades Installation Guide: Wired Shading System, Spackle Ring & Plug | Installation Guide | A | |
| 045684Roller Shades Installation Guide: Wireless Receiver Adapter | Installation Guide | A | Apr 2019 |
| 085580Roller Shades CAD Drawing: Wired Shade, Wall Mount, Section View | CAD Drawing | A | |
| 085650Roller Shades CAD Drawing: Wired Shade, Wire Housing Detail | CAD Drawing | A | |
| 045694Roller Shades Installation Guide: Shades Replacement Roller | Installation Guide | A | Apr 2019 |
| 045770Roller Shades Installation Guide: Wire Housing | Installation Guide | A | May 2019 |
| 085601Roller Shades CAD Drawing: Dual Wall Mount, Section View | CAD Drawing | ||
| 085632Roller Shades CAD Drawing: Wired Shade, Butt and Pass Corner Application Detail | CAD Drawing | C | |
| Roller Shades Revit Family: Ceiling Mount | Revit Family | ||
| Roller Shades Revit Family: Dual Shades, Ceiling Mount | Revit Family |
Revisions of 085560
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| M | Jun 2025 | Current. The file on assets.lutron.com. Checked 15 Oct 2026. |
Not covered in 085560, and what to read next
Lutron document 085560 does not give installation steps, power supply wiring diagrams or fabric collection data.
Publisher and citation for document 085560
Lutron Electronics Co., Inc. publishes document 085560, Rev M, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 15 October 2026.
Lutron, Sivoia QS and Palladiom are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Palladiom?
New Way supplies and installs Lutron Palladiom shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085560 filled in.
