You searched and this document matched it.
See all results085583 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Palladiom Roller Shades CAD Drawing: Wired Shade, Wall Mount, Elevation View (085583)
Lutron's elevation view of a Palladiom roller shade on a wall mount, with a 20.00 in (508 mm) minimum width of shade.
Lutron 085583 Rev A, Palladiom Roller Shades CAD Drawing: Wired Shade, Wall Mount, Elevation View. https://assets.lutron.com/a/documents/palladiom_shade_wall_mount_elevation_view_085583.pdf, via https://newwaykl.com/resources/lutron/roller-shades/palladiom/lutron-palladiom-roller-shades-cad-drawing-085583/
About document 085583
Lutron drawing 085583, revision A, is the wall mount elevation view (view 2) at scale 1/4: minimum shade width and height, minimum light gap, one unlabeled dimension, the mounting note and the clearance note.
What drawing 085583 covers
Lutron document 085583 has these eight sections, all on its one page.
- Sheet header: Palladiom shade, wall mount shade
- Elevation view: minimum shade width and height
- Minimum light gap
- One further unlabeled dimension
- Mounting note: ceiling or wall, wall shown
- Legend (top view), view markers 1 and 2
- Clearance note for the master technician
- Title block: drawing number, scale, view and revision
Specifications in 085583
Lutron document 085583 prints 13 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
View 2 (elevation view)
PDF page 1 of 085583, opens in a new tab- Minimum width of shade
- 20.00 in (508 mm)
- Minimum shade height
- 12.00 in (305 mm)
- Minimum light gap
- 0.50 in (13 mm)
- Unlabeled dimension
- 2.00 in (51 mm)
- Legend (top view)
- Top view of the shade with view markers 1 and 2
- Mounting
- Several mounting configurations allowed; the bracket supports ceiling or wall mounting, wall mount shown
- Clearances
- A shade installed as the factory supplies it has the clearances it needs; the master technician keeps them after installation
Title block
PDF page 1 of 085583, opens in a new tab- Sheet header
- Palladiom shade, wall mount shade
- Drawing title
- Elevation view
- Drawing number
- 085583
- Scale
- 1/4
- View
- 2
- Revision
- A
Facts Lutron states in 085583
The values Lutron document 085583 states, as published:
- What the drawing shows
- An elevation of a Palladiom roller shade on its wall mount bracket, wall mount drawn
- Minimum width of shade
- 20.00 in (508 mm)
- Minimum shade height
- 12.00 in (305 mm)
- Minimum light gap
- 0.50 in (13 mm)
- Other printed dimension
- 2.00 in (51 mm), unlabeled
- Mounting
- One bracket supports ceiling or wall mounting, and the wall mount is drawn
- Legend
- A top view of the shade with view markers 1 and 2, this sheet being view 2
- Clearances
- A factory-supplied shade has the clearances it needs, and the master technician keeps them after installation
- Scale, view and revision
- Scale 1/4, view 2, revision A, no date printed
- Shade and power type
- The sheet names a Palladiom shade only, though Lutron files it with the Palladiom wired shade CAD drawings
- File formats
- PDF of one page, DWG and DXF
- Not on the sheet
- Maximum sizes, bracket dimensions, fixing sizes and wiring are not stated in the document
Questions about document 085583
The answers come from Lutron document 085583 and New Way's record of it.
What is Lutron drawing 085583?
Lutron's one-page wall mount elevation of a Palladiom shade, marked view 2 on the top-view legend, with no date printed. The legend carries view markers 1 and 2.
Which revision of 085583 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085583 cover?
Lutron Palladiom roller shades.
What is the smallest Palladiom shade on a wall mount?
Lutron drawing 085583 prints a minimum width of shade of 20.00 in (508 mm) and a minimum shade height of 12.00 in (305 mm). Lutron drawing 085583 gives no maximum size.
What light gap does drawing 085583 allow for?
Lutron drawing 085583 prints a minimum light gap of 0.50 in (13 mm). Lutron gives no maximum light gap on the sheet.
Who keeps the clearances right once the shade is up?
Lutron drawing 085583 states that a shade installed as the factory supplies it has the clearances it needs to operate. Lutron makes the master technician responsible for keeping those clearances after installation.
Can the same Palladiom bracket go on the ceiling?
Yes, Lutron drawing 085583 notes that several mounting configurations are allowed. The bracket supports ceiling or wall mounting, and the wall mount is the one drawn.
Can I get drawing 085583 as a CAD file?
Yes, Lutron publishes drawing 085583 as a one-page PDF with matching DWG and DXF files. The elevation can then be placed at scale rather than redrawn.
Other Palladiom CAD drawings
CAD drawings for the same Palladiom system:
All 38 Palladiom CAD drawingsDocuments used with 085583
Lutron drawings 085603 and 085580 are the matching plan and section views of the Palladiom wall mount shade. Lutron drawings 085587 and 085650 are the end bracket and wire housing details, and 085560 the specification submittal.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085560Roller Shades Specification Submittal | Specification Submittal | M | Jun 2025 |
| 045694Roller Shades Installation Guide: Shades Replacement Roller | Installation Guide | A | Apr 2019 |
| 045770Roller Shades Installation Guide: Wire Housing | Installation Guide | A | May 2019 |
| Roller Shades Revit Family: Wall Mount | Revit Family | ||
| Roller Shades Revit Family: Ceiling Mount | Revit Family | ||
| Roller Shades Revit Family: Dual Shades, Ceiling Mount | Revit Family | ||
| Roller Shades Revit Family: Dual Shades, Wall Mount | Revit Family | ||
| Roller Shades Revit Family: Jamb Mount | Revit Family | ||
| 085274Sivoia QS Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| 048846Sivoia QS Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
Revisions of 085583
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085583, and what to read next
Lutron drawing 085583 gives minimum sizes and the light gap only, not bracket dimensions, fixings, the head section or wiring.
Publisher and citation for document 085583
Lutron Electronics Co., Inc. publishes document 085583, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Palladiom are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Palladiom?
New Way supplies and installs Lutron Palladiom shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085583 filled in.
