You searched and this document matched it.
See all results085596 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Palladiom Roller Shades CAD Drawing: Wired Shade, Pocket Mount, Section View (085596)
Lutron's section view of a wired Palladiom roller shade in a pocket, with a 4.00 in (102 mm) pocket height.
Lutron 085596 Rev A, Palladiom Roller Shades CAD Drawing: Wired Shade, Pocket Mount, Section View. https://assets.lutron.com/a/documents/palladiom_shade_pocket_mount_section_view_085596.pdf, via https://newwaykl.com/resources/lutron/roller-shades/palladiom/lutron-palladiom-roller-shades-cad-drawing-085596/
About document 085596
Lutron drawing 085596, revision A, is the pocket mount section view at scale 1/2, ceiling mount shown: pocket height and depth, tube and roll-up diameters, tube centers, clearance, reference dimension and two unlabeled dimensions.
What drawing 085596 covers
Lutron document 085596 has these eleven sections, all on its one page.
- Section view of a pocket mount shade
- Pocket height and pocket depth
- Tube diameter and maximum roll-up
- Tube center dimensions
- Minimum recommended clearance and reference dimension
- Two unlabeled dimensions
- Hembar (varies) and glazing (typical)
- Legend (top view)
- Mounting configuration note: ceiling or wall
- Clearance note
- Title block: scale 1/2, view 1, revision A
Specifications in 085596
Lutron document 085596 prints 17 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Pocket height
- 4.00 in (102 mm)
- Pocket depth
- 4.375 in (111 mm)
- Tube diameter
- Ø2.00 in (51 mm)
- Max rollup
- Ø3.00 in (76 mm)
- Tube center
- 2.00 in (51 mm)
- Tube center
- 2.375 in (60 mm)
- Minimum recommended clearance
- 0.50 in (13 mm)
- Reference dimension
- 0.875 in (22 mm), with a 0.50 in minimum recommended clearance
- Unlabeled dimension
- 3.50 in (89 mm)
- Unlabeled dimension
- 3.875 in (98 mm)
- Hembar
- Varies
- Glazing
- Typical
- Mounting
- Ceiling mount shown; bracket supports ceiling or wall mounting
title block
PDF page 1 of 085596, opens in a new tab- Drawing number
- 085596
- Scale
- 1/2
- View
- 1
- Revision
- A
Facts Lutron states in 085596
The values Lutron document 085596 states, as published:
- What the drawing shows
- A section through a Palladiom shade in a pocket, titled pocket mount shade
- Also drawn
- The glazing, the hembar and a top-view legend marked 1 and 2
- Pocket height
- 4.00 in (102 mm)
- Pocket depth
- 4.375 in (111 mm)
- Tube diameter
- Ø2.00 in (51 mm)
- Maximum roll-up
- Ø3.00 in (76 mm)
- Tube center
- 2.00 in (51 mm) and 2.375 in (60 mm), with no words saying what each is measured from
- Minimum recommended clearance
- 0.50 in (13 mm)
- Reference dimension
- 0.875 in (22 mm), noted with a 0.50 in minimum recommended clearance
- Unlabeled dimensions
- 3.50 in (89 mm) and 3.875 in (98 mm)
- Mounting
- Ceiling mount drawn, and Lutron notes that the bracket also supports wall mounting
- Clearance responsibility
- A factory-supplied shade has the clearances it needs, and the master technician keeps them after installation
- View, scale and revision
- View 1, scale 1/2, revision A, no date printed
- File formats
- PDF, DWG and DXF
Questions about document 085596
The answers come from Lutron document 085596 and New Way's record of it.
What is Lutron drawing 085596?
Lutron's one-page pocket mount section of a Palladiom shade, printed with no date and supplied as PDF, DWG and DXF.
Which revision of 085596 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085596 cover?
Lutron Palladiom roller shades.
What pocket size does Lutron drawing 085596 give for the Palladiom shade?
Lutron drawing 085596 prints a pocket height of 4.00 in (102 mm) and a pocket depth of 4.375 in (111 mm).
What tube and roll-up diameters does Lutron drawing 085596 give?
Lutron drawing 085596 prints a Ø2.00 in (51 mm) tube diameter and a Ø3.00 in (76 mm) maximum roll-up.
Can the pocket bracket fix to a wall instead?
Lutron drawing 085596 notes that multiple mounting configurations are allowed. The bracket supports ceiling or wall mounting, and the ceiling mount is the one drawn.
Which clearance does Lutron drawing 085596 call for?
Lutron drawing 085596 prints a 0.50 in (13 mm) minimum recommended clearance.
Lutron marks a 0.875 in (22 mm) reference dimension with the same 0.50 in minimum. Lutron adds that a factory-supplied shade has the clearances it needs and that the master technician keeps them after installation.
Where is the tube center in the pocket on Lutron drawing 085596?
Lutron drawing 085596 marks two tube center dimensions, 2.00 in (51 mm) and 2.375 in (60 mm), without saying what each is measured from. Lutron's PDF shows where each dimension line sits, so check the line on the sheet before using either value.
Other Palladiom CAD drawings
CAD drawings for the same Palladiom system:
All 38 Palladiom CAD drawingsDocuments used with 085596
Lutron drawings 085587 and 085589 are the Palladiom end and center bracket details for pocket section 085596. Lutron document 085560 is the Palladiom roller shade specification submittal.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085560Roller Shades Specification Submittal | Specification Submittal | M | Jun 2025 |
| 045694Roller Shades Installation Guide: Shades Replacement Roller | Installation Guide | A | Apr 2019 |
| 045770Roller Shades Installation Guide: Wire Housing | Installation Guide | A | May 2019 |
| Roller Shades Revit Family: Ceiling Mount | Revit Family | ||
| Roller Shades Revit Family: Dual Shades, Ceiling Mount | Revit Family | ||
| Roller Shades Revit Family: Dual Shades, Wall Mount | Revit Family | ||
| Roller Shades Revit Family: Jamb Mount | Revit Family | ||
| Roller Shades Revit Family: Wall Mount | Revit Family | ||
| 085274Sivoia QS Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| 048846Sivoia QS Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
Revisions of 085596
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085596, and what to read next
Lutron drawing 085596 gives no shade width, fastener sizes or installation steps.
Publisher and citation for document 085596
Lutron Electronics Co., Inc. publishes document 085596, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Palladiom are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Palladiom?
New Way supplies and installs Lutron Palladiom shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085596 filled in.
