You searched and this document matched it.
See all results085633 · CAD Drawing · Rev C · English · PDF, DWG, DXF
Lutron Palladiom Roller Shades CAD Drawing: Wired Shade, Corner to Corner Application Detail (085633)
Lutron's CAD application detail for two wired Palladiom shades meeting at a 90° corner, with the deduction and light gaps.
Lutron 085633 Rev C, Palladiom Roller Shades CAD Drawing: Wired Shade, Corner to Corner Application Detail. https://assets.lutron.com/a/documents/palladiom_shade_corner_to_corner_application_detail_085633.pdf, via https://newwaykl.com/resources/lutron/roller-shades/palladiom/lutron-palladiom-roller-shades-cad-drawing-085633/
About document 085633
Lutron drawing 085633 (Rev C, page 2 at Rev B) is the two-page corner to corner detail: auxiliary views with reverse roll light gaps, then ceiling and wall top views with the deduction and clearance.
What drawing 085633 covers
Lutron document 085633 has these seven sections. Each link opens the PDF at that page in a new tab.
- Corner to corner typical details: auxiliary views, opens in a new tab page 1
- Reverse roll light gaps, maximum rollup and tube, opens in a new tab page 1
- Wall mount bracket view and section reference, opens in a new tab page 1
- Clearance note and 90° corner deduction basis, opens in a new tab page 1
- Corner to corner bracket details: top views, opens in a new tab page 2
- Ceiling mount top view, opens in a new tab page 2
- Wall mount top view, opens in a new tab page 2
Specifications in 085633
Lutron document 085633 prints 22 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
Page 1, auxiliary views, scale 1/4
PDF page 1 of 085633, opens in a new tab- Reverse roll light gap at maximum roll, upper limit
- 1.24 in (32 mm) typical
- Reverse roll light gap, lower limit
- 1.94 in (49 mm) typical
- Maximum rollup
- 3.00 in (76 mm)
- Tube
- 2.00 in (51 mm)
- Unlabeled angles
- 45°, twice
- Scale of the second detail on page 1
- 1/5
- Bracket shown
- Wall mount bracket
- System height and detailed mounting requirements
- Not given; refers to the section drawing
Page 2, top views, ceiling, scale 1/4
PDF page 2 of 085633, opens in a new tab- Measurement deduction
- 3.875 in (98 mm)
- Roll tube centerline
- 2.00 in (51 mm)
- Maximum roll
- 3.00 in (76 mm)
- Minimum recommended clearance
- 0.50 in (13 mm), printed three times
Page 2, top views, wall, scale 1/4
PDF page 2 of 085633, opens in a new tab- Measurement deduction
- 3.875 in (98 mm)
- Roll tube centerline
- 2.00 in (51 mm)
- Maximum roll
- 3.00 in (76 mm)
- Minimum recommended clearance
- 0.50 in (13 mm), printed once
- Basis of the minimum recommended deductions
- 90° corner
Title block
PDF page 1 of 085633, opens in a new tab- Drawing number
- 085633
- Title
- Palladiom shade corner installation
- Scale
- 1/4, both pages
- Revision
- C on page 1; B on page 2
- Pages
- 2
Facts Lutron states in 085633
The values Lutron document 085633 states, as published:
- What the drawing shows
- Two Palladiom shades meeting corner to corner at a 90° corner. Auxiliary views on page 1, ceiling and wall top views on page 2.
- Upper light gap
- 1.24 in (32 mm) typical, reverse roll, at the upper limit of maximum roll
- Lower light gap
- 1.94 in (49 mm) typical, reverse roll, at the lower limit
- Maximum roll-up
- 3.00 in (76 mm) on page 1, and 3.00 in (76 mm) maximum roll on both top views
- Tube
- 2.00 in (51 mm) on page 1, and 2.00 in (51 mm) roll tube centerline on both top views
- Measurement deduction
- 3.875 in (98 mm), printed on both the ceiling and the wall top view
- Minimum recommended clearance
- 0.50 in (13 mm), printed three times on the ceiling top view and once on the wall top view
- Deduction basis
- Lutron bases the minimum recommended deductions on a 90° corner
- Mounting drawn
- Wall mount bracket on the auxiliary views, a ceiling mount and a wall mount on the top views
- System height
- Not given on drawing 085633. Lutron refers the reader to the section drawing for system height and mounting requirements.
- Clearance responsibility
- A shade installed as the factory supplies it has the clearances it needs to operate. The master technician keeps those clearances after installation.
- Scale and revision
- Scale 1/4 on both pages, one view at 1/5 on page 1. Revision C on page 1 and revision B on page 2.
Questions about document 085633
The answers come from Lutron document 085633 and New Way's record of it.
What is Lutron document 085633?
Lutron's two-page corner to corner detail for two Palladiom shades at a 90° corner, with no issue date printed. Page 1 holds the auxiliary views drawn with the wall mount bracket, page 2 the ceiling and wall top views.
Lutron publishes the drawing as a PDF and as DWG and DXF files.
Which revision of 085633 is current?
Rev C is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085633 cover?
Lutron Palladiom roller shades.
How much is deducted from the shade measurement at the corner?
Lutron drawing 085633 prints a measurement deduction of 3.875 in (98 mm) on both the ceiling and the wall top view. Lutron states that the minimum recommended deductions are based on a 90° corner.
What clearance should the installer keep at the corner?
Lutron drawing 085633 prints a minimum recommended clearance of 0.50 in (13 mm) on both top views. Lutron states that a shade installed as supplied by the factory has the clearances it needs.
Lutron makes the master technician responsible for keeping those clearances after installation.
Where is the system height for a corner installation given?
Lutron drawing 085633 refers the reader to the section drawing for system height and mounting requirements, without its number. Lutron drawing 085580 is the Palladiom wall mount section view and 085582 the ceiling mount section view.
How big is the light gap where the two shades meet?
Lutron drawing 085633 prints a typical reverse roll light gap of 1.24 in (32 mm) at the upper limit of maximum roll. Lutron prints 1.94 in (49 mm) typical at the lower limit.
Can the corner be ceiling mounted as well as wall mounted?
Lutron drawing 085633 gives one top view for a ceiling mount and one for a wall mount on page 2. Each top view carries the same 3.875 in (98 mm) measurement deduction and 0.50 in (13 mm) minimum recommended clearance.
Other Palladiom CAD drawings
CAD drawings for the same Palladiom system:
All 38 Palladiom CAD drawingsDocuments used with 085633
Lutron drawing 085632 is the butt and pass corner detail, and 085737 the Wire-Free corner to corner detail. Lutron drawing 085633 names no section drawing number; 085580 and 085582 are the wall and ceiling mount section views.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085560Roller Shades Specification Submittal | Specification Submittal | M | Jun 2025 |
| 045694Roller Shades Installation Guide: Shades Replacement Roller | Installation Guide | A | Apr 2019 |
| 045770Roller Shades Installation Guide: Wire Housing | Installation Guide | A | May 2019 |
| Roller Shades Revit Family: Ceiling Mount | Revit Family | ||
| Roller Shades Revit Family: Dual Shades, Ceiling Mount | Revit Family | ||
| Roller Shades Revit Family: Dual Shades, Wall Mount | Revit Family | ||
| Roller Shades Revit Family: Jamb Mount | Revit Family | ||
| Roller Shades Revit Family: Wall Mount | Revit Family | ||
| 085274Sivoia QS Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| 048846Sivoia QS Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
Revisions of 085633
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| C | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085633, and what to read next
Lutron drawing 085633 gives no system height, bracket size, fastener or wiring detail for the corner.
Publisher and citation for document 085633
Lutron Electronics Co., Inc. publishes document 085633, Rev C, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Palladiom are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Palladiom?
New Way supplies and installs Lutron Palladiom shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085633 filled in.
