You searched and this document matched it.
See all results085768 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Roller 64 CAD Drawing: WIDR Shade Mount with 4″ Fascia Brackets (Regular Roll), Elevation View (085768)
Lutron's elevation view of the Roller 64 4 in fascia mount shade with fascia brackets, regular roll.
Lutron 085768 Rev A, Sivoia QS Roller 64 CAD Drawing: WIDR Shade Mount with 4 in. Fascia Brackets (Regular Roll), Elevation View. https://assets.lutron.com/a/documents/085768.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-64-cad-drawing-085768/
About document 085768
Lutron drawing 085768, Rev A, is the one-page regular roll fascia elevation at 1/4 scale, view 2: minimum shade width and height, minimum light gap, mounting and clearance notes, as PDF, DWG and DXF.
What drawing 085768 covers
Lutron document 085768 has these five sections, all on its one page.
- Elevation of the fascia mount shade, regular roll
- Minimum width and minimum height of shade
- Minimum light gap and the quote pointer
- Mounting configurations and the clearance note
- Legend in top view and title block
Specifications in 085768
Lutron document 085768 prints 13 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Fascia
- 4 in (inches only)
- Brackets
- Fascia brackets
- Roll
- Regular roll
Elevation view
PDF page 1 of 085768, opens in a new tab- Minimum width of shade
- 17.5 in (445 mm)
- Minimum shade height
- 12 in (305 mm)
- Minimum light gap
- 0.75 in (19 mm)
- Actual light gap
- Refer to the quote
- Unlabeled value
- 3.88 in (99 mm)
Mounting configurations
PDF page 1 of 085768, opens in a new tab- Mounting the bracket supports
- Ceiling, wall or jamb
- Mount shown
- Wall
Scale, view, revision
PDF page 1 of 085768, opens in a new tab- Scale
- 1/4
- View
- 2
- Revision
- A
Facts Lutron states in 085768
The values Lutron document 085768 states, as published:
- Shade covered
- Roller 64 on a 4 in fascia mount with fascia brackets, regular roll, wall mount shown
- Minimum width of shade
- 17.5 in (445 mm), printed inside parentheses
- Minimum shade height
- 12 in (305 mm)
- Minimum light gap
- 0.75 in (19 mm)
- Actual light gap
- Lutron refers the reader to the quote
- Mounting
- The bracket supports ceiling, wall or jamb mounting, wall mount shown
- Scale, view and revision
- 1/4, view 2, revision A, no date printed
- Other value printed
- 3.88 in (99 mm), without a label
- Clearances as supplied
- A shade installed as supplied by the factory has the clearances it needs
- Adjustment features
- Lutron makes the installer responsible for keeping proper clearances once adjustment features are used
- Adjustment at maximum roll
- Not all adjustments are available at the maximum roll diameter
- File formats
- PDF, DWG and DXF
Questions about document 085768
The answers come from Lutron document 085768 and New Way's record of it.
What is the smallest shade on the 4 in fascia mount?
Lutron drawing 085768 prints a minimum width of 17.5 in (445 mm) and a minimum height of 12 in (305 mm). Lutron prints the width inside parentheses on the sheet.
Which revision of 085768 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085768 cover?
Lutron Sivoia QS roller shades in the Roller 64 drive class.
How does the regular roll sheet differ from the reverse roll sheet?
Lutron drawing 085768 covers the regular roll, and 085769 is the matching reverse roll elevation. Each sheet prints its own values, so the reverse roll figures come from 085769.
Which mounts does the fascia bracket allow?
Lutron states the bracket supports ceiling, wall or jamb mounting; the elevation shows a wall mount.
What does Lutron say about adjusting the shade after installation?
Lutron states that a shade installed as supplied by the factory has the clearances it needs. Once the adjustment features are used, Lutron makes the installer responsible for keeping proper clearances.
Lutron notes that not all adjustments are available at the maximum roll diameter.
How wide is the light gap?
Lutron prints a minimum light gap of 0.75 in (19 mm) and refers the reader to the quote for the actual light gap.
What fascia size does the drawing show?
Lutron drawing 085768 titles the shade a Roller 64 4 in fascia mount shade with fascia brackets, regular roll. Lutron prints the fascia size in inches only.
Other Sivoia QS Roller 64 CAD drawings
CAD drawings for the same Sivoia QS Roller 64 drive class:
All 142 Sivoia QS CAD drawingsDocuments used with 085768
Lutron drawing 085769 is the reverse roll elevation, 085765 its section with top back cover and 045930 its installation guide. Lutron's fascia details are 085774 and 085775, brackets 085776 and 085777, top back covers 085772 and 085773, end cap 085767.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045930Roller 64 Installation Guide: WIDR, 4″ Fascia Mount Chassis (Reverse Roll) | Installation Guide | B | Aug 2023 |
| 085705Roller 64 Specification Submittal | Specification Submittal | D | Sep 2025 |
| 045929Roller 64 Installation Guide: WIDR, 4″ Fascia Mount Chassis (Regular Roll) | Installation Guide | B | Aug 2023 |
| 045843Roller 64 Installation Guide: WIDR Pocket Mount | Installation Guide | B | Sep 2021 |
| Roller 64 Revit Family: Ceiling Mount | Revit Family | ||
| Roller 64 Revit Family: Dual (Ceiling Mount) | Revit Family | ||
| Roller 64 Revit Family: Dual (Wall Mount) | Revit Family | ||
| Roller 64 Revit Family: Pocket Mount | Revit Family | ||
| Roller 64 Revit Family: Wall Mount | Revit Family | ||
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
Revisions of 085768
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085768, and what to read next
Lutron drawing 085768 gives no fascia section, bracket dimensions or installation steps.
Publisher and citation for document 085768
Lutron Electronics Co., Inc. publishes document 085768, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085768 filled in.
