You searched and this document matched it.
See all results085769 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Roller 64 CAD Drawing: WIDR Shade Mount with 4″ Fascia Brackets (Reverse Roll), Elevation View (085769)
Lutron's elevation view of the Roller 64 4 in fascia mount shade with fascia brackets, reverse roll.
Lutron 085769 Rev A, Sivoia QS Roller 64 CAD Drawing: WIDR Shade Mount with 4 in. Fascia Brackets (Reverse Roll), Elevation View. https://assets.lutron.com/a/documents/085769.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-64-cad-drawing-085769/
About document 085769
Lutron drawing 085769, Rev A, is the one-page reverse roll fascia elevation at 1/4 scale, view 2: minimum shade width and height, minimum light gap, mounting and clearance notes, as PDF, DWG and DXF.
What drawing 085769 covers
Lutron document 085769 has these six sections, all on its one page.
- Elevation of the fascia mount shade, reverse roll
- Minimum width and minimum height of shade
- Minimum light gap and the quote pointer
- Mounting configurations the fascia bracket allows
- Clearance note and adjustment limits
- Legend in top view and title block
Specifications in 085769
Lutron document 085769 prints 14 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
View 2, elevation
PDF page 1 of 085769, opens in a new tab- Minimum width of shade
- 17.5 in (445 mm), printed in parentheses
- Minimum shade height
- 12 in (305 mm)
- Minimum light gap
- 0.75 in (19 mm)
- Actual light gap
- Refer to the quote
- Unlabeled dimension
- 3.31 in (85 mm)
- Configurations the bracket supports
- Ceiling, wall or jamb (wall mount shown)
- Clearances
- Set at the factory; kept by the installer when adjustment features are used
- Adjustments at maximum roll diameter
- Not all available
Title block
PDF page 1 of 085769, opens in a new tab- Product
- Roller 64
- Shade
- 4 in fascia mount shade with fascia brackets, reverse roll
- Number as printed
- 085769
- Scale
- 1/4
- View
- 2
- Revision
- A
Facts Lutron states in 085769
The values Lutron document 085769 states, as published:
- What the drawing shows
- An elevation of a Roller 64 shade on a 4 in fascia mount, reverse roll, wall mount drawn
- Minimum width of shade
- 17.5 in (445 mm), printed inside parentheses
- Minimum shade height
- 12 in (305 mm)
- Minimum light gap
- 0.75 in (19 mm)
- Actual light gap
- Lutron refers the reader to the quote
- Mounting configurations
- Lutron's bracket supports ceiling, wall or jamb mounting, with the wall mount drawn
- Clearances as supplied
- A shade installed as the factory supplies it has the clearances it needs to run
- Adjustment features
- Once adjustment features are used, Lutron makes the installer responsible for keeping proper clearances
- Adjustment at full roll
- Lutron notes that not all adjustments are available at the maximum roll diameter
- Unlabeled dimension
- 3.31 in (85 mm)
- Title block
- Roller 64, number 085769, scale 1/4, view 2, revision A
- Files offered
- PDF, DWG and DXF
Questions about document 085769
The answers come from Lutron document 085769 and New Way's record of it.
What is the smallest reverse roll shade on the fascia mount?
Lutron drawing 085769 prints a minimum width of 17.5 in (445 mm) and a minimum height of 12 in (305 mm). Lutron draws these for the reverse roll fascia shade, width inside parentheses.
Which revision of 085769 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085769 cover?
Lutron Sivoia QS roller shades in the Roller 64 drive class.
What light gap does the reverse roll fascia shade allow?
Lutron drawing 085769 prints a minimum light gap of 0.75 in (19 mm). Lutron refers the reader to the quote for the actual light gap.
Which surfaces can the Roller 64 fascia bracket be fixed to?
Lutron's note on drawing 085769 says the bracket supports ceiling, wall or jamb mounting. Lutron's elevation shows the wall mount.
What happens to the clearances if the installer adjusts the bracket?
Lutron states that a shade installed as the factory supplies it has the clearances it needs to run. Once adjustment features are used, Lutron makes the installer responsible for keeping proper clearances.
Lutron notes that not all adjustments are available at the maximum roll diameter.
How does the reverse roll sheet relate to the regular roll sheet?
Lutron drawing 085769 covers the reverse roll, and Lutron drawing 085768 is the matching elevation view for the regular roll. Lutron prints separate values on each sheet, so read the regular roll figures from 085768.
Does the reverse roll elevation give a fascia height or hembar size?
No, Lutron drawing 085769 labels only the minimum width, minimum shade height and minimum light gap. Lutron prints one further dimension, 3.31 in (85 mm), without a label.
Other Sivoia QS Roller 64 CAD drawings
CAD drawings for the same Sivoia QS Roller 64 drive class:
All 142 Sivoia QS CAD drawingsDocuments used with 085769
Lutron drawing 085768 is the regular roll elevation, 085764 its section with top back cover and 045929 its installation guide. Lutron's fascia details are 085774 and 085775, brackets 085776 and 085777, top back covers 085772 and 085773, end cap 085767.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045929Roller 64 Installation Guide: WIDR, 4″ Fascia Mount Chassis (Regular Roll) | Installation Guide | B | Aug 2023 |
| 085705Roller 64 Specification Submittal | Specification Submittal | D | Sep 2025 |
| 045930Roller 64 Installation Guide: WIDR, 4″ Fascia Mount Chassis (Reverse Roll) | Installation Guide | B | Aug 2023 |
| 045843Roller 64 Installation Guide: WIDR Pocket Mount | Installation Guide | B | Sep 2021 |
| Roller 64 Revit Family: Ceiling Mount | Revit Family | ||
| Roller 64 Revit Family: Dual (Ceiling Mount) | Revit Family | ||
| Roller 64 Revit Family: Dual (Wall Mount) | Revit Family | ||
| Roller 64 Revit Family: Pocket Mount | Revit Family | ||
| Roller 64 Revit Family: Wall Mount | Revit Family | ||
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
Revisions of 085769
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085769, and what to read next
Lutron drawing 085769 gives no section through the shade head, no fascia or bracket profile dimensions and no installation steps.
Publisher and citation for document 085769
Lutron Electronics Co., Inc. publishes document 085769, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085769 filled in.
