You searched and this document matched it.
See all results085421 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Roller 64 CAD Drawing: Universal Mount Shade in 3.5″ (89mm) Pocket, Section View
Lutron's section through the Sivoia QS Roller 64 universal mount shade in a 3.5 in pocket, ceiling fixed.
Lutron 085421 Rev A, Sivoia QS Roller 64 CAD Drawing: Universal Mount Shade in 3.5 in. (89mm) Pocket, Section View. https://assets.lutron.com/a/documents/0019-r064-pmt-s.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-64-cad-drawing-universal-mount-shade-in-3-5-89mm-pocket-section-view/
About document 085421
Lutron drawing 085421, revision A, is section view 1 of the Roller 64 universal mount shade in a 3.5 in pocket: pocket size, optional flap, tube and roll-up diameters, tube center, mounting and clearance notes.
What drawing 085421 covers
Lutron document 085421 has these eleven sections, all on its one page.
- Section view 1 at scale 3/4, ceiling mount
- Pocket depth and pocket height
- Tube center, on two dimension lines
- Tube diameter and maximum roll-up
- Optional 2 in pocket flap
- Ceiling fasteners, hembar and glazing labels
- Unlabeled dimension at the lower left
- Note on ceiling, wall and jamb mounting
- Note on factory clearances and the adjustment features
- Legend (top view) with markers 1 and 2
- Title block with number, scale, view and revision
Specifications in 085421
Lutron document 085421 prints 15 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Pocket depth
- 3.50 in (89 mm)
- Tube center (dimension line across the top)
- 1.75 in (44 mm)
- Max rollup, diameter
- 3.00 in (76 mm)
- Tube center (dimension line at the right)
- 1.88 in (48 mm)
- Tube diameter
- 1.67 in (43 mm)
- Pocket height
- 3.50 in (89 mm)
- Pocket flap (optional), as labeled
- 2 in
- Dimension printed above the 2 in pocket flap (optional) label
- 2.38 in (60 mm)
- Dimension at the lower left, no label
- 0.25 in (7 mm)
- Hembar
- Varies
- Mounting configurations
- Ceiling, wall and jamb; ceiling mount shown
Title block
PDF page 1 of 085421, opens in a new tab- Scale
- 3/4
- View
- 1
- Drawing number
- 085421
- Revision
- A
Facts Lutron states in 085421
The values Lutron document 085421 states, as published:
- Drawing number and revision
- 085421, revision A, in the title block
- Subject
- Roller 64 universal mount shade in a 3.5 in pocket
- View
- Section view, view 1, scale 3/4
- Pocket depth
- 3.50 in (89 mm)
- Pocket height
- 3.50 in (89 mm)
- Tube diameter
- 1.67 in (43 mm)
- Maximum roll-up
- 3.00 in (76 mm) diameter
- Tube center
- 1.75 in (44 mm) on the line across the top of the section
- 1.88 in (48 mm) on the line at its right
- Pocket flap
- Optional 2 in pocket flap, with no metric value printed
- Flap dimension line
- 2.38 in (60 mm) is printed on the same dimension line as the flap
- Mounting
- Ceiling fasteners drawn, and Lutron notes that the bracket also supports wall and jamb mounting
- Clearances
- Factory-supplied shade: has the clearances it needs to run
- Adjustment features used: the installer keeps the clearances
- Maximum roll diameter: some adjustments cannot be used
- Unlabeled value
- 0.25 in (7 mm), printed at the lower left of the section without a label
- File formats
- PDF, DWG and DXF, one sheet
Questions about document 085421
The answers come from Lutron document 085421 and New Way's record of it.
What is Lutron document 085421?
Lutron's section through the Sivoia QS Roller 64 universal mount shade in a 3.5 in pocket, ceiling fixed. Lutron drawing 085421, revision A, is section view 1 of the Roller 64 universal mount shade in a 3.5 in pocket: pocket size, optional flap, tube and roll-up diameters, tube center, mounting and clearance notes.
Which revision of 085421 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085421 cover?
Lutron Sivoia QS roller shades in the Roller 64 drive class.
What does Lutron drawing 085421 show?
Lutron draws view 1 at scale 3/4 on drawing 085421, with ceiling fasteners, the hembar varying and the glazing typical. Lutron adds a top view legend with markers 1 and 2 and publishes the sheet as PDF, DWG and DXF.
What pocket size does drawing 085421 show?
Lutron dimensions the pocket at 3.50 in (89 mm) pocket depth and 3.50 in (89 mm) pocket height.
Where does the tube center sit in the pocket?
Lutron drawing 085421 prints the tube center twice. The line across the top of the section reads 1.75 in (44 mm); the line at its right reads 1.88 in (48 mm).
Can the universal bracket fix to a wall or jamb?
Yes. Lutron notes that the bracket supports ceiling, wall and jamb mounting; drawing 085421 shows the ceiling mount with ceiling fasteners.
How large does the rolled fabric get inside the pocket?
Lutron drawing 085421 shows a maximum roll-up of 3.00 in (76 mm) diameter.
- Tube diameter: 1.67 in (43 mm)
- Pocket: 3.50 in (89 mm) deep and high
Other Sivoia QS Roller 64 CAD drawings
CAD drawings for the same Sivoia QS Roller 64 drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085422Roller 64 CAD Drawing: Ceiling Mount Shade Universal Bracket, Elevation View | Roller 64 | A | |
| 085418Roller 64 CAD Drawing: Universal Shade Bracket, Detail Drawing | Roller 64 | A | |
| 085419Roller 64 CAD Drawing: Wall Mount Shade Universal Bracket, Elevation View | Roller 64 | A | |
| Roller 64 CAD Drawing: 3.5 in [90 mm] Pocket | Roller 64 |
Documents used with 085421
Lutron's other Roller 64 universal mount drawings are 085418 (section view), 085419 (elevation view) and 085422 (ceiling mount bracket elevation). Lutron's chassis installation guides are 045618 for the pocket mount and 045616 for the standard single and dual mount.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045618ROLLER 20/64 – Pocket Mount Chassis Installation Guide | Installation Guide | A | May 2018 |
| 045616Roller Shades Installation Guide: Roller 20/64, Standard Single & Dual Mount Chassis (Universal Bracket) | Installation Guide | A | Apr 2018 |
| 085705Roller 64 Specification Submittal | Specification Submittal | D | Sep 2025 |
| 045843Roller 64 Installation Guide: WIDR Pocket Mount | Installation Guide | B | Sep 2021 |
| 045929Roller 64 Installation Guide: WIDR, 4″ Fascia Mount Chassis (Regular Roll) | Installation Guide | B | Aug 2023 |
| Roller 64 Revit Family: Ceiling Mount | Revit Family | ||
| Roller 64 Revit Family: Dual (Ceiling Mount) | Revit Family | ||
| Roller 64 Revit Family: Dual (Wall Mount) | Revit Family | ||
| Roller 64 Revit Family: Pocket Mount | Revit Family | ||
| Roller 64 Revit Family: Wall Mount | Revit Family |
Revisions of 085421
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085421, and what to read next
Lutron drawing 085421 is a section only: no shade width and height limits, light gap, bracket dimensions or fastener sizes.
Publisher and citation for document 085421
Lutron Electronics Co., Inc. publishes document 085421, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085421 filled in.
