You searched and this document matched it.
See all results085286 · Specification Submittal · Rev D · Aug 2024 · English · PDF, 10 pages, 2.2 MB
Lutron Sivoia QS Roller 300 Specification Submittal (085286, rev D)
Lutron's specification submittal for the Sivoia QS Roller 300 LIFT chassis, with single panels up to 12 ft (3.66 m) wide.
Lutron 085286 Rev D (August 2024), Sivoia QS Roller 300 Specification Submittal. https://assets.lutron.com/a/documents/085286.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-300-specification-submittal-085286/
About document 085286
Lutron document 085286, Rev D of August 2024, is the Roller 300 LIFT chassis specification submittal: power and performance, shade options, six bracket types, the inline coupled system and the clerestory shade.
What submittal 085286 covers
Lutron document 085286 has these eleven sections. Each link opens the PDF at that page in a new tab.
- Features, opens in a new tab page 1
- Specifications: power and performance, opens in a new tab page 2
- Controls, integration and grouping, opens in a new tab page 2
- Shade options, opens in a new tab page 3
- Dimensions, opens in a new tab page 4
- Bracket options: wall, ceiling and jamb, opens in a new tab page 5
- Bracket options: dual, fascia and pocket, opens in a new tab page 6
- Inline coupled system, opens in a new tab page 7
- Clerestory shades: specifications and mounting, opens in a new tab page 8
- Clerestory shade applications, opens in a new tab page 9
- Batten rules for clerestory shades, opens in a new tab page 10
Specifications in 085286
Lutron document 085286 prints 60 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Operating noise
- 50 dBA max., measured 3 ft (1 m) from the EDU
- Alignment accuracy
- Within 0.125 in (3 mm) at all times; may not apply to shades with battens
- Single fabric panel, width
- Up to 12 ft (3.66 m), standard sizes
- Single fabric panel, height
- Up to 30 ft (9.1 m), standard sizes
- Fabric per EDU
- 300 sq ft max.
- Linear speed
- 3.6 in/s
- Tall, narrow shades
- Lutron may increase the light gaps to offset telescoping
- Power failure memory
- Lifetime of the product
- Warranty
- 8 year limited
- Operating voltage
- Low-voltage Class 2, 35 V DC power supply required
- Overvoltage protection
- Spike and brownout, ±10% of line voltage, for all devices
- ESD protection
- From the power supply, for all devices
- Power source
- Lutron approved NEC Class 2 power source
Performance
PDF page 2 of 085286, opens in a new tab- Symmetrical light gaps
- As small as 0.75 in (19 mm) each side
- Presets
- Any stop point, plus full open and full close limits, stored in each EDU
- Stopping accuracy
- 0.125 in (3 mm) steps over the full travel
- Limits
- Programmable and adjustable at the EDUs or through Lutron controls
Controls and Integration
PDF page 2 of 085286, opens in a new tab- Lutron integration
- Shared lighting and shade keypads, scene control, timeclock, software and mobile app control, solar adaptive automation
- Third-party integration
- Contact closure, RS232 or Ethernet
- Group control
- Keypads run any EDU, group or subgroup with no separate group controller; may need a Lutron Qualified Technician visit
- Regrouping
- At the point of control, with no rewiring and no EDU access; may need a service visit
Shade Options
PDF page 3 of 085286, opens in a new tab- Mounting
- Inside mount, outside mount
- Drive side
- Left, right
- Fabric drop
- Regular roll, reverse roll
- Hembar styles
- Designer (standard), Exposed, Sealed, Architectural Half-Wrap, Architectural Exposed; availability may depend on fabric
- Hembar colors (Exposed, Architectural Half-Wrap, Architectural Exposed)
- White, black, bronze, silver or custom
- Fabric types
- Sheer, privacy, blackout
Dimensions
PDF page 4 of 085286, opens in a new tab- Values at each bracket (wall brackets shown)
- 2.0 in (50.8 mm); 3.0 in (76.2 mm)
- Complete assembly, printed at each end
- 0.75 in (19 mm)
Bracket Options
PDF pages 5 and 6 of 085286, opens in a new tab- Load rating, wall, ceiling, jamb, dual, fascia and pocket brackets
- 250 lbs (133 kg) each
- Wall mount bracket dimensions
- F 4.3 in (109 mm); G 5 in (127 mm)
- Ceiling mount bracket dimensions
- H 4 in (102 mm); I 3.31 in (84 mm); J 0.0165 in (4 mm), as printed; K 5.2 in (132 mm); L 4.39 in (111 mm)
- Jamb mount bracket dimensions
- M 5.125 in (130 mm); N 4.44 in (113 mm); O 4.69 in (119 mm)
- Dual mount bracket dimensions
- P 7 in (178 mm); Q 11 in (279 mm); R 1 in (25 mm)
- Dual mount fabric drop
- Fabric unrolls closest to the glass
- Fascia mount bracket dimension
- S 4.2 in (107 mm)
- Pocket mount bracket dimensions
- T 4.75 in (121 mm); U 5 in (127 mm)
Inline Coupled System
PDF page 7 of 085286, opens in a new tab- Panels per EDU
- Up to 6
- Light gap between panels
- 1.5 in (38 mm) min.
- Mounting
- All mounting options
- Hembar alignment
- Within 0.125 in (3 mm); may not apply with battens; adjustable after installation at the coupler hub set screws
Clerestory Shades
PDF page 8 of 085286, opens in a new tab- Application
- Shade height 20 ft (6.1 m) to 30 ft (9.1 m), or multi-story shades mounted above 20 ft (6.1 m)
- Maximum height
- 30 ft (9.1 m)
- Mounting space
- 7 in x 7 in (178 mm x 178 mm) min. recommended
- Mounting
- Ceiling and pocket only; not available with coupling
- Fabrics
- Limited
- Side channel
- Not recommended
- IHA and cable guide
- IHA available; cable guide available for vertical applications
- Custom options
- Possible on inquiry to Lutron: wall mount, smaller pockets, dual shades and shades over 30 ft (9.1 m)
- Clerestory bracket load
- 1000 lbs (454 kg) each
- Bracket finish
- White
- Bracket drawing, printed values
- 4.75 in (121 mm); 3.00 in (76 mm); 6.25 in (159 mm); 5.63 in (143 mm); 0.31 in (8 mm); 1.00 in (25 mm); 2.38 in (60 mm); 3.25 in (83 mm); 3.63 in (92 mm); 0.41 in (10 mm); 4.25 in (108 mm)
- Pocket mount drawing, printed values
- 7.00 in (178 mm), twice; 3.50 in (89 mm); 3.35 in (85 mm)
- Max roll
- 0.68 in (17 mm)
- Pocket flap (optional)
- 3.00 in (76 mm)
- Shade closed
- 1.90 in (48 mm)
- Shade tube
- ø3.06 in (78 mm)
- Fabric roll
- ø5.50 in (140 mm) max.
Batten Rules for Clerestory Shades
PDF page 10 of 085286, opens in a new tab- Shade height 20 ft (6.1 m) to 25 ft (7.6 m)
- 1 batten (battens required on clerestory shades over 20 ft (6.1 m))
- Shade height 25 ft (7.6 m) to 30 ft (9.1 m)
- 2 battens
Facts Lutron states in 085286
The values Lutron document 085286 states, as published:
- Single panel size
- Standard sizes reach 12 ft (3.66 m) in width and 30 ft (9.1 m) in height
- Coupled panels
- Lutron Intelligent Facade Technology (LIFT) drives up to 6 coupled panels from one EDU. Maximum 300 sq ft of fabric, at 3.6 in/s
- Light gaps
- 0.75 in (19 mm) between fabric and window frame on each side
- 1.5 in (38 mm) minimum between coupled panels
- Lutron may widen the gaps on tall, narrow shades to offset telescoping
- Noise and accuracy
- No more than 50 dBA at 3 ft (1 m) from the EDU. Shades stop and align within 0.125 in (3 mm), which may not apply to shades with battens
- Integration
- Third-party control through contact closure, RS232 or Ethernet. With Lutron controls the shades share keypads with lighting and join scenes, timeclock, software, mobile app and solar adaptive automation
- Operating voltage
- Low-voltage Class 2 at 35 V DC, from a Lutron approved NEC Class 2 power source. The control system power supply adds spike and brownout protection of plus or minus 10% of line voltage
- Standard bracket load
- Wall, ceiling, jamb, dual mount, fascia mount and pocket mount brackets are each rated for loads up to 250 lbs (133 kg)
- Bracket dimensions
- Wall bracket: F 4.3 in (109 mm), G 5 in (127 mm)
- Dual mount bracket: P 7 in (178 mm), Q 11 in (279 mm)
- Fascia bracket: S 4.2 in (107 mm)
- Pocket bracket: T 4.75 in (121 mm), U 5 in (127 mm)
- Clerestory bracket load
- Up to 1000 lbs (454 kg) each
- Minimum recommended mounting space 7 in x 7 in (178 mm x 178 mm)
- Ceiling and pocket mount only
- Clerestory tube and roll
- Shade tube ø3.06 in (78 mm), fabric roll ø5.50 in (140 mm) maximum, bracket finish white
- Battens
- One batten for shade heights 20 ft (6.1 m) to 25 ft (7.6 m). Two battens from 25 ft (7.6 m) to 30 ft (9.1 m)
- Warranty
- 8 year limited warranty, power failure memory for the life of the product
- Hembar options
- Styles: Designer (standard), Exposed, Sealed, Architectural Half-Wrap, Architectural Exposed
- Exposed and Architectural styles: white, black, bronze, silver, custom color
- The fabric may limit the choice
Questions about document 085286
The answers come from Lutron document 085286 and New Way's record of it.
What is Lutron document 085286?
Lutron's ten-page Roller 300 LIFT chassis specification submittal with no model numbers printed. Lutron's EDU sits inside the shade assembly, tracks the shade position and returns the shade to stored presets.
Which revision of 085286 is current?
Rev D, dated August 2024, is the revision Lutron publishes. New Way checked it against assets.lutron.com on 15 October 2026.
Which roller shades does 085286 cover?
Lutron Sivoia QS roller shades in the Roller 300 drive class.
How large can one Roller 300 panel be?
Lutron document 085286 lists standard single panels of up to 12 ft (3.66 m) in width and 30 ft (9.1 m) in height. With Lutron LIFT, one EDU drives up to 6 coupled panels and 300 sq ft of fabric at 3.6 in/s.
What power does a Roller 300 system need?
Lutron document 085286 calls for low-voltage Class 2 power at 35 V DC. The source is a Lutron approved NEC Class 2 power supply, with compatibility referred to a separate power supply specification.
The control system power supply provides overvoltage protection of plus or minus 10% of line voltage and ESD protection.
What load must the Roller 300 brackets carry?
Lutron document 085286 rates the wall, ceiling, jamb, dual, fascia and pocket brackets at up to 250 lbs (133 kg) each. The clerestory brackets carry up to 1000 lbs (454 kg) each.
Lutron requires mounting to blocking or other structural material, with fasteners chosen by the installer to suit the surface.
How are the hembars of coupled Roller 300 panels leveled?
Lutron document 085286 levels adjacent hembars during installation. Loosen both coupler hub set screws, adjust the shade and tighten both screws again.
Lutron then holds coupled hembars aligned within 0.125 in (3 mm), a figure that may not apply to shades with battens.
What light gaps does a Roller 300 leave?
Lutron document 085286 gives 0.75 in (19 mm) between the fabric and the window frame on each side, symmetrical. Coupled panels keep a 1.5 in (38 mm) minimum gap.
Lutron may enlarge the gaps on tall, narrow shades, which are more likely to telescope.
Other Sivoia QS specification submittals
Specification submittals for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085267Roller Shades Specification Submittal: Roller 150 | D | Apr 2024 | |
| 086107Roller Shades Specification Submittal: Roller 200CW | A | ||
| 086106Roller Shades Specification Submittal: Roller 100 | Roller 100, Roller 300 | B | May 2017 |
| 0853144-Group RF Remote Control Specification Submittal | C | May 2016 |
Documents used with 085286
Lutron's 086112, 085705, 086106, 085267, 086107 and 086105 are the Roller 20, 64, 100, 150, 200CW and 225 specification submittals. Lutron documents 085781 and 085780 are the clerestory shade bracket and section view CAD drawings.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085781Roller 300 CAD Drawing: Clerestory Shade Bracket | CAD Drawing | B | |
| 085780Roller 300 CAD Drawing: Clerestory Shade-Section View | CAD Drawing | D | |
| 045943Roller 300 Installation Guide | Installation Guide | A | Jan 2024 |
| 085498Roller 300 CAD Drawing: Contract Roller Motorized Wall/Ceiling/Pocket Sub-Bracket | CAD Drawing | B | |
| 085489Roller 300 CAD Drawing: Contract Roller Motorized Wall/Ceiling/Pocket/Dual/AXIOM Compatible Left Shade Bracket | CAD Drawing | B | |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
| 0454114-Group RF Remote Control Installation Guide | Installation Guide | D | Jan 2015 |
| 045000710 Output Power Panel Power Supply (12 V) Installation Guide | Installation Guide | A | Jul 2025 |
Revisions of 085286
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| D | Aug 2024 | Current. The file on assets.lutron.com. Checked 15 Oct 2026. |
Not covered in 085286, and what to read next
Lutron document 085286 specifies the Roller 300 but gives no fixing sequence, no wiring and no limit setting.
Publisher and citation for document 085286
Lutron Electronics Co., Inc. publishes document 085286, Rev D, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 15 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085286 filled in.
