You searched and this document matched it.
See all resultsCAD Drawing · Rev B · English · PDF, DWG, DXF
Lutron Sivoia QS Roller Shades CAD Drawing: Cable Guided Shades, Typical Section
Lutron's CAD section of a cable guided Sivoia QS roller shade against a facade angled in or out.
Lutron, Sivoia QS Roller Shades CAD Drawing: Cable Guided Shades, Typical Section. https://assets.lutron.com/a/documents/0285-gush-cmt-s(2).pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-shades-cad-drawing-cable-guided-shades-typical-section/
About this Sivoia QS drawing
Lutron drawing 0285-GUSH-CMT-S, Rev B, is the one-page sheet Cable Guided Shades, Typical Section Views: view 1 at scale 1/4, the roller shade, tensioner, guide cable, cable anchor and the 20 degree maximum angle.
What this Sivoia QS drawing covers
This Sivoia QS drawing has these six sections.
- View 1, Typical Section, scale 1/4
- Facade angled in, shade at the ceiling
- Facade angled out, shade at the ceiling
- Labeled parts of the cable run
- Maximum angle of 20 degrees, both halves
- Title block: Roller Shade Detail Drawing
Specifications in this Sivoia QS drawing
This Sivoia QS drawing prints two values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Max angle, facade angled in
- 20 degrees
- Max angle, facade angled out
- 20 degrees
Facts Lutron states in this Sivoia QS drawing
The values this Sivoia QS drawing states, as published:
- Drawing number on the sheet
- 0285-GUSH-CMT-S, revision B, printed in the title block
- View and scale
- View 1, Typical Section, scale 1/4
- Conditions drawn
- Facade angled in and facade angled out, one half of the sheet each
- Maximum angle
- 20 degrees, marked on each facade condition, with no other unit given
- Parts labeled
- Roller shade, tensioner, guide cable, cable anchor, facade (angled), ceiling
- File formats
- PDF (about 244 KB), DWG and DXF
- Copyright line
- 2009, Lutron Electronics Co., Inc.
- Filed under
- Sivoia QS Roller 20, 64, 100, 225 and 300 and the commercial roller shades
Questions about this Sivoia QS drawing
The answers come from this Sivoia QS drawing and New Way's record of it.
What is Lutron drawing 0285-GUSH-CMT-S?
Lutron's typical section of a cable guided roller shade on a sloping facade, printed with no linear dimensions. Each half shows the shade at the ceiling, a tensioner at the shade and a cable anchor at the foot.
Which revision of this Sivoia QS drawing is current?
Rev B is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does this Sivoia QS drawing cover?
Lutron Sivoia QS roller shades.
What maximum facade angle does Lutron mark?
Lutron marks a maximum angle of 20 degrees on both halves, facade angled in and facade angled out. The sheet prints no other value.
Does the drawing give pocket, bracket or cable dimensions?
No. Lutron drawing 0285-GUSH-CMT-S prints no linear dimensions; the 20 degree maximum angle is the only value on the sheet. For pocket and bracket sizes, read a mount-specific section drawing or the installation guide.
Which revision and file formats does the sheet carry?
Lutron's title block prints revision B and a 2009 copyright line, with no issue date. Lutron supplies the sheet as PDF (about 244 KB), DWG and DXF.
Which documents go with this Sivoia QS drawing?
Three documents go with this Sivoia QS drawing, listed under Documents used with this Sivoia QS drawing with the others:
Other Sivoia QS CAD drawings
CAD drawings for the same Sivoia QS system:
All 142 Sivoia QS CAD drawingsDocuments used with this Sivoia QS drawing
Lutron guide 045336 installs the cable guided turnbuckle hardware, and drawing 085792 is the dimensioned commercial cable guided pocket section. Lutron guide 045959 mounts the wired power roller shade, and submittal 085835 covers the Select roller shades.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045336Roller Shades Installation Guide: Cable Guided (Turnbuckle Design) | Installation Guide | B | |
| 045959Wired Power Roller Shade Mounting Installation Guide | Installation Guide | C | Sep 2025 |
| 085835Serena Open Roll Roller Shades Specification Submittal | Specification Submittal | A | Feb 2026 |
| 369612Pico Wireless Control Specification Submittal | Specification Submittal | Q | Jun 2025 |
| 3685115Specification Submittal: Shading Solutions 8-Year Warranty Policy | Specification Submittal | C | Dec 2024 |
| 0454114-Group RF Remote Control Installation Guide | Installation Guide | D | Jan 2015 |
| 045520Basic Wiring and Setup Installation Guide | Installation Guide | B | Nov 2016 |
| Revit Family: QS J-Box 35V Power Supply | Revit Family | ||
| Revit Family: QS Smart Power Panel, 30 Output | Revit Family | ||
| Revit Family: Smart Panel | Revit Family |
Revisions of this Sivoia QS drawing
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| B | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in this Sivoia QS drawing, and what to read next
Lutron drawing 0285-GUSH-CMT-S shows no pocket, bracket, fascia or cable dimensions and no mounting steps.
Publisher and citation for this Sivoia QS drawing
Lutron Electronics Co., Inc. publishes this document and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
