You searched and this document matched it.
See all results085835 · Specification Submittal · Rev A · Feb 2026 · English · PDF, 7 pages, 2.0 MB
Lutron Serena Open Roll Roller Shades Specification Submittal (085835, rev A)
Lutron's specification submittal for the Serena Open Roll Shade, a battery-powered smart roller shade with an exposed roll.
Lutron 085835 Rev A (February 2026), Serena Open Roll Roller Shades Specification Submittal. https://assets.lutron.com/a/documents/085835_eng.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-select-roller-shades-specification-submittal-085835/
About document 085835
Lutron document 085835, Rev A of February 2026, is the Serena Open Roll Shade specification submittal: size range, drive ratings, listings, environment limits, compatible controls, battery access clearances and mounting options.
What submittal 085835 covers
Lutron document 085835 has these eight sections. Each link opens the PDF at that page in a new tab.
- Serena Open Roll Shades: features, opens in a new tab page 1
- Specifications: regulatory, ratings, compatible controls and environment, opens in a new tab page 2
- Dimensions, opens in a new tab page 3
- Ordered shade width and height, opens in a new tab page 4
- Battery power, opens in a new tab page 5
- Battery access clearance, opens in a new tab page 5
- Mounting options: inside, jamb and ceiling mount, opens in a new tab page 6
- Outside mount on trim, above trim, spacers, opens in a new tab page 7
Specifications in 085835
Lutron document 085835 prints 38 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Battery performance
- 2 years typical, using 5 D-cell alkaline batteries
- Sound
- 44 dBA measured 3 ft (0.9 m) from the drive
- Stopping interval
- 0.125 in (3 mm) through the entire travel
- Width
- 24.5 in (62.23 cm) to 108 in (274.32 cm)
- Height
- 12 in (30.48 cm) to 120 in (304.8 cm)
- Wireless communication
- Clear Connect Type A RF, built in
- Wireless control range
- 30 ft (9 m)
- Light gaps
- Symmetrical, as small as 0.75 in (1.90 cm), nominal
- Fabric types
- Sheer, translucent and room darkening, with coordinating bracket colors
- Roll
- Regular roll only
- Drive side
- Left-drive only
Regulatory
PDF page 2 of 085835, opens in a new tab- Listings
- cULus listed; FCC (USA); IC (Canada)
- Operating voltage
- 7.5 V DC
- Operating wattage
- 4 W
- Torque
- 4.0 in-lb (0.45 N·m)
- Speed
- 2.5 in/sec (63.5 mm/sec)
Compatible Controls
PDF page 2 of 085835, opens in a new tab- Controls
- Pico wireless control; Caséta Smart Hub; Caséta Smart Hub PRO
Environment
PDF page 2 of 085835, opens in a new tab- Temperature
- 32 °F to 104 °F (0 °C to 40 °C)
- Location
- Indoor use only
- Relative humidity
- Below 90%, non-condensing
Dimensions
PDF page 3 of 085835, opens in a new tab- Type A bracket, drawing values (unlabeled)
- 3.45 in (8.77 cm), 3.615 in (9.18 cm)
- Type A bracket, second view, drawing values (unlabeled)
- 0.5 in (1.27 cm), 0.8 in (2.03 cm), 0.6 in (1.53 cm), 1.9 in (4.83 cm)
Ordered Shade Width and Height
PDF page 4 of 085835, opens in a new tab- Width measurement
- Outer faces of the brackets
- Height measurement
- Top of the bracket to the bottom of the hembar; maximum dependent on fabric selection
- Light gap each side
- 0.75 in (1.90 cm)
Battery Power
PDF page 5 of 085835, opens in a new tab- Battery type
- 1.5 V D-cell alkaline, not included; new; brands and types not mixed
- Battery quantity
- Varies with shade configuration, marked on the battery sleeve; five on the sleeve shown
Battery Access Clearance
PDF page 5 of 085835, opens in a new tab- Bracket mounting depth
- 6.25 in (158.75 mm)
- Battery sleeve removal and insertion
- 14.0 in (355.6 mm)
Mounting Options
PDF pages 6 and 7 of 085835, opens in a new tab- Mounts
- Ceiling inside mount, jamb inside mount, outside mount on trim, outside mount above trim
- Bracket orientation
- As indicated; cannot be rotated
- Jamb depth for full recess
- At least 3.75 in (95 mm)
- Clearance in front of the shade
- 3.75 in (95 mm) to install or remove the shade brackets
- Jamb mount screws
- Through the side of the bracket; holes drilled first; flat head screws not provided
- Ceiling mount screws
- Through the top of the bracket into blocking
- Outside mount screws
- Through the back of the bracket into blocking
- Spacer clearance
- 1/2 in (12.7 mm) off the mounting surface; cannot be stacked
- Spacer supply
- Spacers and longer screws included for outside mount above trim; available on request
Facts Lutron states in 085835
The values Lutron document 085835 states, as published:
- Size range
- Widths 24.5 in (62.23 cm) to 108 in (274.32 cm)
- Heights 12 in (30.48 cm) to 120 in (304.8 cm), the limit depending on the fabric
- Width across the outer faces of the brackets
- Height from the bracket top to the bottom of the hembar
- Batteries
- 1.5 V D-cell alkaline batteries, not included, five shown on the battery sleeve
- 2 year battery performance typical
- Quantity varies with shade configuration and is marked on the sleeve
- New batteries of one brand and type
- Ratings
- Operating voltage 7.5 V DC
- Operating wattage 4 W
- Torque 4.0 in-lb (0.45 N·m)
- Speed 2.5 in/sec (63.5 mm/sec)
- Noise
- 44 dBA at 3 ft (0.9 m) from the drive
- Precision
- The drive can stop at 0.125 in (3 mm) intervals over the full travel
- Wireless and controls
- Built-in Clear Connect Type A RF with a 30 ft (9 m) control range
- Pico wireless control
- Caséta Smart Hub
- Caséta Smart Hub PRO
- Roll and light gaps
- Regular roll only, left drive only, symmetrical light gaps as small as 0.75 in (1.90 cm) nominal
- Environment
- 32 °F to 104 °F (0 °C to 40 °C), indoor use only, relative humidity below 90% non-condensing
- Listings
- cULus listed, FCC (USA) and IC (Canada)
- Battery access clearance
- 6.25 in (158.75 mm) bracket mounting depth for the slide-out left shade bracket
- 14.0 in (355.6 mm) to end walls or nearby objects for the battery sleeve
- Without that room, the shade comes off the brackets to change batteries
- Inside mount depth
- Jamb at least 3.75 in (95 mm) deep to fully recess the shade
- 3.75 in (95 mm) in front of the shade to fit or remove brackets
- Screw direction by mount
- All into blocking
- Jamb mount: through the side, with holes drilled through the bracket first
- Jamb mount screws: flat head, not provided
- Ceiling mount: through the top; outside mounts: through the back
- Bracket orientation
- Each bracket goes on in the orientation shown and cannot be turned round
- Spacers
- Included, with longer screws, on orders specifying outside mount above trim
- 1/2 in (12.7 mm) of clearance off the mounting surface
- Can clear window or door handles
- Cannot be stacked
Questions about document 085835
The answers come from Lutron document 085835 and New Way's record of it.
What is Lutron document 085835?
Lutron's seven-page Serena Open Roll Shade specification submittal, dated 2 February 2026 under part number 085835a.
Lutron document 085835 carries job name, job number and model number fields for a tender.
Which revision of 085835 is current?
Rev A, dated February 2026, is the revision Lutron publishes. New Way checked it against assets.lutron.com on 15 October 2026.
Which roller shades does 085835 cover?
Lutron Sivoia QS roller shades.
What sizes can the Lutron Serena Open Roll shade be ordered in?
Lutron document 085835 lists widths from 24.5 in (62.23 cm) to 108 in (274.32 cm).
- Heights 12 in (30.48 cm) to 120 in (304.8 cm), fabric permitting
- Ordered width: across the outer faces of the brackets
- Ordered height: bracket top to the bottom of the hembar
How is the shade powered and what are its drive ratings?
Lutron document 085835 runs the shade on 1.5 V D-cell alkaline batteries, not included, 2 year performance typical.
- Five cells shown; the count varies with configuration, marked on the sleeve
- Drive rated 7.5 V DC and 4 W
- Torque 4.0 in-lb (0.45 N·m), speed 2.5 in/sec (63.5 mm/sec)
What clearance does battery access need?
Lutron document 085835 asks for 6.25 in (158.75 mm) of bracket mounting depth for the slide-out left bracket.
Removing and inserting the battery sleeve needs 14.0 in (355.6 mm) to end walls or other objects. In close quarters the shade comes off the brackets, as the installation guide explains.
How are the brackets fixed for each mount?
Lutron document 085835 drives every mount's screws into blocking.
- Jamb mount: through the side of the bracket, drilled through first
- Jamb mount: flat head screws, not provided
- Ceiling mount through the top, outside mount through the back
Which controls work with the Serena Open Roll shade?
Lutron document 085835 lists the Pico wireless control, the Caséta Smart Hub and the Caséta Smart Hub PRO. All three work over the shade's built-in Clear Connect Type A RF with a 30 ft (9 m) range.
Other Sivoia QS specification submittals
Specification submittals for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 08533510-Output Smart Panel Specification Submittal | Commercial Contract Manual, Roller 20 to 300 | D | Apr 2020 |
| 08559230-Output Configurable Power Panel Enclosure (Power Modules sold separately), 35V Output Specification Submittal | Roller 20 to 300 | B | Nov 2018 |
| 08554435V J-Box Power Supply Specification Submittal | Commercial Contract Manual, Roller 20 to 300 | C | Oct 2017 |
| 085593Configurable Power Panel, 10 Output Specification Submittal | Roller 20 to 300 | B | Dec 2018 |
Documents used with 085835
Lutron document 085835 cites no other document numbers. Close-quarters battery access goes to the installation guide, and battery brands to a Lutron web page on battery life.
| Document | Type | Revision | Date |
|---|---|---|---|
| 0454114-Group RF Remote Control Installation Guide | Installation Guide | D | Jan 2015 |
| 045520Basic Wiring and Setup Installation Guide | Installation Guide | B | Nov 2016 |
| CAD Drawing: 30-Output Configurable Power Panel Enclosure (Power Modules Sold Separately), 35V Output, Elevation View (Front) | CAD Drawing | ||
| CAD Drawing: 30-Output Configurable Power Panel Enclosure (Power Modules Sold Separately), 35V Output, Plan View (Bottom) | CAD Drawing | ||
| 045000710 Output Power Panel Power Supply (12 V) Installation Guide | Installation Guide | A | Jul 2025 |
| 04562030-Output Configurable Power Panel Enclosure, 35V Output Installation Guide | Installation Guide | B | Jan 2018 |
| Roller Shades Wiring Diagram: Multiple Shades per Single QS Smart Panel | Wiring Diagram | ||
| Roller Shades Wiring Diagram: One Shade per Single QS Smart Panel | Wiring Diagram | ||
| Revit Family: QS J-Box 35V Power Supply | Revit Family | ||
| Revit Family: QS Smart Power Panel, 30 Output | Revit Family |
Revisions of 085835
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Feb 2026 | Current. The file on assets.lutron.com. Checked 15 Oct 2026. |
Not covered in 085835, and what to read next
Lutron document 085835 gives no installation steps, no Pico or Caséta programming and no model number list.
Publisher and citation for document 085835
Lutron Electronics Co., Inc. publishes document 085835, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 15 October 2026.
Lutron, Sivoia QS and Serena are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085835 filled in.
