You searched and this document matched it.
See all results369373 · Specification Submittal · Rev I · Oct 2026 · English · PDF, 6 pages, 0.9 MB
Lutron Sivoia QS Roller Shades Specification Submittal: QS RS232/Ethernet Interface (369373, rev I)
Lutron's specification submittal for the QSE-CI-NWK-E control interface: RS232 or Ethernet control of a wired QS system by third-party equipment.
Lutron 369373 Rev I (October 2026), Sivoia QS Roller Shades Specification Submittal: QS RS232/Ethernet Interface. https://assets.lutron.com/a/documents/369373_qse-ci-nwk-e_eng.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-shades-specification-submittal-369373/
About document 369373
Lutron document 369373, Rev I of October 2026, is the QSE-CI-NWK-E specification submittal: power rating, QS link limits, environment, integration features, RS232 and Ethernet connections, dimensions, mounting, LED and DIP switch locations and wire sizes.
What submittal 369373 covers
Lutron document 369373 has these eight sections. Each link opens the PDF at that page in a new tab.
- Features and compatible systems, opens in a new tab page 1
- Regulatory approvals, power and QS link limits, opens in a new tab page 2
- Environment and integration features, opens in a new tab page 2
- Requirements, protocol, RS232 and Ethernet connection, opens in a new tab page 2
- Dimensions and mounting options, opens in a new tab page 3
- Terminal, LED and DIP switch locations, opens in a new tab page 4
- RS232 link and Ethernet link wiring, opens in a new tab page 5
- QS link wiring methods and wire sizes, opens in a new tab page 6
Specifications in 369373
Lutron document 369373 prints 44 values in the groups the document uses, each with the document's unit. A row names the catalog codes it applies to. The page link beside each group opens the PDF where the group starts.
- Interfaces per QS link
- Up to 10Models: QSE-CI-NWK-E
- Integration routes
- RS232, or TCP / IP over EthernetModels: QSE-CI-NWK-E
- BAA-compliant model
- UQSE-CI-NWK-EModels: UQSE-CI-NWK-E
Regulatory Approvals
PDF page 2 of 369373, opens in a new tab- Approvals
- RoHS compliant; CE marked; NOM; cULus; FCC Part 15 Subpart B Class B
- Wiring class
- SELV / PELV / NEC Class 2
- Operating voltage
- 24 V DC to 36 V DC
- Operating current
- 65 mA
QS Link Limits
PDF page 2 of 369373, opens in a new tab- QS link capacity
- 100 devices and 100 zones
- Count per interface
- 1 device, 0 zonesModels: QSE-CI-NWK-E
- Power draw per interface
- 2 power draw units (PDU)Models: QSE-CI-NWK-E
- Maximum QS link wiring length
- 2000 ft (610 m)
Environment
PDF page 2 of 369373, opens in a new tab- Ambient temperature
- 32 °F to 104 °F (0 °C to 40 °C)
- Relative humidity
- Less than 90%, non-condensing
- Use
- Indoor use only
- Heat generated
- 8 BTU/hr maximum
Requirements
PDF page 2 of 369373, opens in a new tab- QS link power supply
- GRAFIK Eye QS, a QS link power supply such as QSPS-P1-1-50, or Energi Savr Node QSModels: QSPS-P1-1-50
- QS communication link
- SELV / PELV / NEC Class 2
RS232 Connection
PDF page 2 of 369373, opens in a new tab- Connector
- Standard 9-pin female serial connector
- Maximum serial cable length
- 50 ft (15 m)
- Baud rate, set by DIP switches
- 115200 (default), 38400, 19200 or 9600
- DIP switch factory setting
- All Off
Ethernet Connection
PDF page 2 of 369373, opens in a new tab- Cable
- Standard CAT5 or better, 328 ft (100 m) maximum
- Crossover
- MDI / MDIX auto-crossover; no crossover cable needed
- Speed and duplex
- Auto-negotiation of 10 or 100 Mbps, full or half duplex
- Default IP address
- 192.168.250.1, changed with the Lutron Device IP tool
- Port use
- RS232 or Ethernet, not both
Dimensions
PDF page 3 of 369373, opens in a new tab- Dimensions marked on the outline drawing
- 2.5 in (63 mm); 3.75 in (95 mm); 4.25 in (108 mm); 5.25 in (134 mm); 1.0 in (27 mm)
- Mounting hole detail
- 0.3125 in (9 mm) dia. and 0.1875 in (5 mm) dia., with a 0.25 in (6 mm) dimension marked
- Recommended screw
- #6 or #8 (M3 or M4)
Mounting Options
PDF page 3 of 369373, opens in a new tab- Wire strip length
- 3/8 in (10 mm)
- Data link terminal capacity
- Up to two 18 AWG (1.0 mm²) wires
- Direct wall mounting
- Screws not included
- Rack mounting
- Up to four units per rack, screws provided with the unitModels: LUT-19AV-1U
- Enclosed wall mounting, where conduit is wanted
- One unit per enclosureModels: LUT-5x10-ENC
- RS232 signals on the 9-pin cable
- Com pin 5; TxD pin 3; RxD pin 2
- QS link terminals
- 1 Common; 2 V+; 3 MUX; 4 MUX
- Terminal 2 (V+)
- Not connected when an external power supply is used
- Ethernet network and cable
- Provided by others
QS Link Wiring Methods
PDF page 6 of 369373, opens in a new tab- Terminal capacity
- Up to two 18 AWG (1.0 mm²) wires or one 12 AWG (4.0 mm²) wire
- Total control link length
- 2000 ft (610 m) maximum
QS Link Wire Sizes
PDF page 6 of 369373, opens in a new tab- Under 500 ft (153 m): power, terminals 1 and 2
- 1 pair 18 AWG (1.0 mm²)Models: GRX-CBL-346S, GRX-PCBL-346S
- Under 500 ft (153 m): data, terminals 3 and 4
- 1 twisted, shielded pair 22 AWG (0.5 mm²)Models: GRX-CBL-346S, GRX-PCBL-346S
- 500 ft to 2000 ft (153 m to 610 m): power, terminals 1 and 2
- 1 pair 12 AWG (4.0 mm²)Models: GRX-CBL-46L, GRX-PCBL-46L
- 500 ft to 2000 ft (153 m to 610 m): data, terminals 3 and 4
- 1 twisted, shielded pair 22 AWG (0.5 mm²)Models: GRX-CBL-46L, GRX-PCBL-46L
Facts Lutron states in 369373
The values Lutron document 369373 states, as published:
- What it does
- An integration access point for QS-based systems. Third-party devices control or monitor GRAFIK Eye QS, Sivoia QS, Energi Savr Node and other QS link products. The link is RS232 or TCP/IP on Ethernet.
- Interfaces per link and compatibility
- Up to 10 QSE-CI-NWK-E interfaces per QS link
- Compatible with Athena, Quantum, QS standalone and HomeWorks systems
- A BAA-compliant model, UQSE-CI-NWK-E, exists
- Power
- SELV / PELV / NEC Class 2
- Operating voltage 24 V DC to 36 V DC at 65 mA
- Each interface consumes 2 power draw units on the QS link
- QS link limits
- The wired QS link is limited to 100 devices and 100 zones
- Each interface counts as 1 device and 0 zones
- Maximum QS link wiring length 2000 ft (610 m)
- Environment
- 32 °F to 104 °F (0 °C to 40 °C), relative humidity below 90% non-condensing, indoor use only, maximum heat output 8 BTU/hr
- RS232 connection
- Standard 9-pin female serial connector
- Serial cable 50 ft (15 m) maximum
- Baud rate by DIP switches: 115200, 38400, 19200 or 9600
- Factory default 115200, all switches off
- Ethernet connection
- CAT5 or better cable, 328 ft (100 m) maximum
- MDI/MDIX auto-crossover, 10 or 100 Mbps auto-negotiation
- Default IP address 192.168.250.1, changed with the Lutron Device IP tool
- RS232 or Ethernet can be used, not both
- Mounting
- Direct wall mount with #6 or #8 (M3 or M4) screws
- Up to four units in a LUT-19AV-1U AV rack
- One unit in a LUT-5x10-ENC enclosure where conduit is wanted
- Strip 3/8 in (10 mm) of insulation
- Each data link terminal takes up to two 18 AWG (1.0 mm²) wires
- QS link wire sizes
- Under 500 ft (153 m): 18 AWG (1.0 mm²) power pair on terminals 1 and 2
- Data: one twisted shielded 22 AWG (0.5 mm²) pair on terminals 3 and 4
- Cables under 500 ft (153 m): GRX-CBL-346S, or plenum GRX-PCBL-346S
- 500 ft to 2000 ft (153 m to 610 m): 12 AWG (4.0 mm²) power pair
- Cables 500 ft to 2000 ft: GRX-CBL-46L, or plenum GRX-PCBL-46L
- QS link terminals
- 1 common, 2 V+, 3 MUX, 4 MUX-bar
- Terminals 1, 3 and 4 reach every control unit, wallstation and interface
- Terminal 2 (V+) stays unconnected with an external power supply
- Integration features
- Monitors: current scene, zone level, button presses, shade group levels
- Controls: scene selection, scene and zone lockout, sequencing
- Also: zone and master raise/lower, shade group level, simulated button presses
- Regulatory approvals
- RoHS compliant, CE marked, NOM, cULus, FCC Part 15 Subpart B Class B
- LEDs
- LED 1 power, LED 2 Ethernet activity, LED 3 unused
- LEDs 4 and 5: RS232 transmit and receive
- LEDs 6 and 7: QS link transmit and receive
Questions about document 369373
The answers come from Lutron document 369373 and New Way's record of it.
What is Lutron document 369373?
Lutron's six-page QSE-CI-NWK-E specification submittal, printed as 369373i and dated 10.02.26 in every page footer. The interface serves the whole wired QS link, lighting and shades alike.
Which revision of 369373 is current?
Rev I, dated October 2026, is the revision Lutron publishes. New Way checked it against assets.lutron.com on 15 October 2026.
Which roller shades does 369373 cover?
Lutron Sivoia QS roller shades. Lutron document 369373 refers readers to document 040249.
Can the QSE-CI-NWK-E use RS232 and Ethernet at the same time?
No: Lutron document 369373 states that either the RS232 or the Ethernet connection can be used, not both. The RS232 cable is limited to 50 ft (15 m) and the Ethernet CAT5 cable to 328 ft (100 m).
How many interfaces fit on one QS link?
Lutron document 369373 allows up to 10 QSE-CI-NWK-E interfaces per QS link.
- Each: 1 device and 0 zones, against the 100-device, 100-zone limit
- Each consumes 2 power draw units
- Each draws 65 mA at 24 V DC to 36 V DC
What wire does the QS link need?
Lutron document 369373 specifies a twisted, shielded 22 AWG (0.5 mm²) pair for data on every run.
- Under 500 ft (153 m): an 18 AWG (1.0 mm²) power pair
- 500 ft to 2000 ft (153 m to 610 m): a 12 AWG (4.0 mm²) power pair
- Total control link not over 2000 ft (610 m)
How is the interface mounted?
Lutron document 369373 gives three mounting options, with the terminal blocks, switches and LEDs kept accessible.
- Wall mount, #6 or #8 (M3 or M4) screws not included
- In a LUT-19AV-1U AV rack, which holds up to four units
- In a LUT-5x10-ENC enclosure when conduit is wanted
Which Lutron systems does the QSE-CI-NWK-E work with?
Lutron document 369373 lists Athena, Quantum, QS standalone and HomeWorks systems and says the interface suits most QS devices. The complete list of compatible components is in the integration protocol document 040249.
Other Sivoia QS specification submittals
Specification submittals for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 0853144-Group RF Remote Control Specification Submittal | C | May 2016 | |
| 085274Hard Wired Power Supply Specification Submittal | D | Aug 2014 | |
| 369847Pico Wireless Control, 4-Button Specification Submittal | K | Mar 2024 | |
| 369374Roller Shades Specification Submittal: QS Contact Closure Input/Output Interface | H | Apr 2026 |
Documents used with 369373
Lutron document 369373 cites 040249, the integration protocol, and 369405, the QS link power draw units specification submittal. The Sivoia QS power supply installation guides 045528, 045488 and 045604 sit in the same tree.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045528Roller Shades Installation Guide: Smart Panel, 120V to 240V Input, 35V Output | Installation Guide | E | Nov 2017 |
| 045488Roller Shades Installation Guide: QS Link Plug-In Power Supply, NEMA 5-15 Plug, 120 V to 240 V Input, 35 V Output | Installation Guide | B | Jul 2016 |
| 045604Roller Shades Installation Guide: QS Power Supply J-Box Mount | Installation Guide | A | |
| CAD Drawing: Shade Equipment CAD Block | CAD Drawing | ||
| 085612Roller 100 CAD Drawing: 4.75″ x 5″ (121 x 127mm) Pocket, Detail Drawing | CAD Drawing | A | |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
| 0454114-Group RF Remote Control Installation Guide | Installation Guide | D | Jan 2015 |
| 045520Basic Wiring and Setup Installation Guide | Installation Guide | B | Nov 2016 |
Revisions of 369373
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| I | Oct 2026 | Current. The file on assets.lutron.com. Checked 15 Oct 2026. |
Not covered in 369373, and what to read next
Lutron document 369373 does not give the integration command set or the full list of compatible components.
- Commands and components: 040249, the Lutron integration protocol document
- Link power: 369405, the QS link power draw units specification submittal
Publisher and citation for document 369373
Lutron Electronics Co., Inc. publishes document 369373, Rev I, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 15 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 369373 filled in.
