You searched and this document matched it.
See all results085378 · CAD Drawing · Rev B · English · PDF, DWG, DXF
Lutron Commercial Contract Manual CAD Drawing: Contract Roller Motorized, Single Shade with Recessed Pocket, Ceiling Mount, Section View (085378)
Lutron's CAD section of the Contract Roller motorized shade, ceiling mounted inside a recessed pocket 5.13 in (130 mm) high.
Lutron 085378 Rev B, Commercial Contract Manual CAD Drawing: Contract Roller Motorized, Single Shade with Recessed Pocket, Ceiling Mount, Section View. https://assets.lutron.com/a/documents/085378.pdf, via https://newwaykl.com/resources/lutron/roller-shades/manual/lutron-commercial-commercial-contract-manual-cad-drawing-085378/
About document 085378
Lutron document 085378, revision B, is a one-page CAD section at scale 1/2, view 1, with the pocket height, depth and flap, the tube sizes, maximum roll-up, tube center and the sub-bracket on ceiling fasteners.
What drawing 085378 covers
Lutron document 085378 has these nine sections, all on its one page.
- Section view 1 at scale 1/2, ceiling mount
- Recessed pocket height, depth and pocket flap
- Tube diameter, optional tubes and tube center
- Maximum roll-up
- Sub-bracket and ceiling fasteners
- Mounting configuration note, ceiling or wall
- Clearance note
- Legend (top view) with markers 1 and 2
- Title block, code CMR-C, revision B
Specifications in 085378
Lutron document 085378 prints 14 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Pocket height
- 5.13 in (130 mm)
- Pocket depth
- 5.00 in (127 mm)
- Pocket flap
- 2.89 in (73 mm)
- Tube center, first callout
- 2.75 in (70 mm)
- Tube center, second callout
- 2.75 in (70 mm)
- Tube diameter
- Ø2.56 in (65 mm)
- Optional tube diameters
- Ø2.65 in (67 mm) and Ø3.00 in (77 mm)
- Max rollup
- Ø3.75 in (95 mm)
- Dimension with no label on the sheet
- 0.88 in (23 mm)
- Mounting configurations
- Ceiling or wall; ceiling mount shown
Title block
PDF page 1 of 085378, opens in a new tab- Scale
- 1/2
- View
- 1
- Revision
- B
- Code beside the drawing number
- CMR-C
Facts Lutron states in 085378
The values Lutron document 085378 states, as published:
- What the drawing shows
- A section through a Contract Roller motorized shade (CMR-C) in a recessed pocket, on a sub-bracket with ceiling fasteners
- 5.13 in (130 mm) high and 5.00 in (127 mm) deep
- Pocket flap
- 2.89 in (73 mm)
- Tube diameter
- 2.56 in (65 mm) standard, with 2.65 in (67 mm) and 3.00 in (77 mm) printed as optional
- Maximum roll-up diameter
- 3.75 in (95 mm) inside the pocket
- Tube center
- 2.75 in (70 mm), printed at two places on the section
- Unlabeled dimension
- 0.88 in (23 mm)
- Mounting
- Several mounting configurations are allowed
- The bracket supports ceiling or wall mounting
- The ceiling mount is the one drawn
- Clearances
- A shade installed as supplied has the clearances it needs
- After adjustment features are used, proper clearances are the installer's job
- Not every adjustment is available at the maximum roll diameter
- Title block
- Scale 1/2, view 1, revision B, CMR-C beside drawing number 085378, no date on the sheet
- File formats
- PDF (about 297 KB), DWG and DXF
Questions about document 085378
The answers come from Lutron document 085378 and New Way's record of it.
What is Lutron document 085378?
Lutron's one-page CAD section of the shade in a pocket, code CMR-C, as PDF (about 297 KB), DWG and DXF.
Which revision of 085378 is current?
Rev B is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085378 cover?
Lutron Manual roller shades in the Commercial Contract Manual drive class.
What pocket size does Lutron drawing 085378 show?
Lutron drawing 085378 dimensions the recessed pocket at 5.13 in (130 mm) high. The sheet prints no tolerance on these figures.
- Pocket depth: 5.00 in (127 mm)
- Pocket flap: 2.89 in (73 mm)
Which tube sizes does the drawing allow for?
Lutron drawing 085378 shows a 2.56 in (65 mm) tube diameter. The sheet does not say when the optional tubes apply.
- Optional tube: 2.65 in (67 mm)
- Optional tube: 3.00 in (77 mm)
How is the shade held in the pocket?
Lutron drawing 085378 shows the shade on a sub-bracket fixed with ceiling fasteners. The sheet names no fastener size or type.
What does the clearance note on 085378 ask of the installer?
Lutron drawing 085378 notes that a shade left as the factory supplied it has the clearances it needs to run. Once the installer uses the adjustment features, keeping proper clearance becomes the installer's job.
Lutron adds that not every adjustment is available at the maximum roll diameter.
How large can the fabric roll get inside the pocket?
Lutron drawing 085378 marks a maximum roll-up diameter of 3.75 in (95 mm) inside the pocket.
Other Manual Commercial Contract Manual CAD drawings
CAD drawings for the same Manual Commercial Contract Manual drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085380Commercial Contract Manual CAD Drawing: Contract Roller Motorized, Dual Shade with Recessed Pocket, Ceiling Mount, Section View | Commercial Contract Manual | A | |
| 085819Commercial Contract Manual CAD Drawing: Contract Roller Motorized, Single Shade in Dual Recessed Pockets, Ceiling Mount, Section View | Commercial Contract Manual | A | |
| 085379Commercial Contract Manual CAD Drawing: Contract Roller Motorized, Single Shade with Fascia, Ceiling Mount, Section View | Commercial Contract Manual | A | |
| 085377Commercial Contract Manual CAD Drawing: Contract Roller Motorized, Single Shade with No Top Treatment, Ceiling Mount, Section View | Commercial Contract Manual | B |
Documents used with 085378
Lutron drawings 085377, 085379, 085380 and 085819 are the other motorized sections: no top treatment, fascia, dual shade, dual pockets. Lutron drawing 085498 is the sub-bracket CAD drawing, and 085370 the motorized shade specification submittal.
Revisions of 085378
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| B | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085378, and what to read next
Lutron drawing 085378 prints no fastener sizes, no wiring, no mounting steps and no wall-mount view.
Publisher and citation for document 085378
Lutron Electronics Co., Inc. publishes document 085378, Rev B, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron is a trademark of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Manual roller shades?
New Way supplies and installs Lutron Manual roller shades in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085378 filled in.
