You searched and this document matched it.
See all results085636 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Commercial Contract Manual CAD Drawing: Contract Roller Motorized, Dual Shade with Fascia and Back Cover, Ceiling Mount, Section View (085636)
Lutron's section drawing of the Contract Roller Motorized dual shade on the dual fascia and back cover bracket, ceiling mounted.
Lutron 085636 Rev A, Commercial Contract Manual CAD Drawing: Contract Roller Motorized, Dual Shade with Fascia and Back Cover, Ceiling Mount, Section View. https://assets.lutron.com/a/documents/085636.pdf, via https://newwaykl.com/resources/lutron/roller-shades/manual/lutron-commercial-commercial-contract-manual-cad-drawing-085636/
About document 085636
Lutron document 085636, Rev A at scale 1/1, is the motorized dual shade fascia and back cover section: bracket height and depth, fascia depth, tube options, roll-up, tube centers and the back cover deduction.
What drawing 085636 covers
Lutron document 085636 has these eleven sections, all on its one page.
- View 1: section at scale 1/1, ceiling mount
- Bracket height and bracket depth with fascia
- Dual 8 in fascia, back cover, fascia depth
- Sub-bracket, shade bracket and ceiling fasteners
- Tube diameter, tube options and maximum roll-up
- Tube center dimensions
- Back cover note: starred dimensions, 0.11 in deduction
- Hembar (varies)
- Legend (top view) and the mounting configuration note
- Clearance note on factory clearances and site adjustment
- Title block: CMR-C, 085636, scale, view, revision
Specifications in 085636
Lutron document 085636 prints 23 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Bracket depth with fascia
- 6.13 in (156 mm), starred
- Unlabeled dimension
- 6.13 in (156 mm), starred
- Bracket height with fascia
- 8.06 in (204 mm)
- Fascia depth
- 1.06 in (27 mm)
- Dual fascia
- 8 in
- Back cover
- 8 in
- Tube center
- 5.912 in (150 mm)
- Tube center
- 2.267 in (58 mm)
- Tube center
- 3.25 in (83 mm), starred
- Tube center
- 2.25 in (57 mm), starred
- Unlabeled dimension
- 1.57 in (40 mm), starred
- Unlabeled dimension
- 0.57 in (14 mm), starred
- Tube diameter
- Ø2.56 in (65 mm)
- Tube diameter, optional
- Ø2.65 in (67 mm) or Ø3.00 in (77 mm)
- Max rollup
- Ø3.35 in (85 mm)
- Deduction from starred dimensions when the back cover is not installed
- 0.11 in
- Shade bracket
- Ships with shade
- Hembar
- Varies
- Mounting
- Ceiling mount shown; bracket supports ceiling or wall mounting
- Code
- CMR-C
- Scale
- 1/1
- View
- 1
- Revision
- A
Facts Lutron states in 085636
The values Lutron document 085636 states, as published:
- Bracket height with fascia
- 8.06 in (204 mm)
- Bracket depth with fascia
- 6.13 in (156 mm), a starred dimension
- Fascia depth
- 1.06 in (27 mm)
- Fascia and back cover
- Dual 8 in fascia and 8 in back cover, with no metric value printed for either
- Tube diameter
- Ø2.56 in (65 mm), with optional Ø2.65 in (67 mm) or Ø3.00 in (77 mm) tubes
- Maximum roll-up
- Ø3.35 in (85 mm)
- Tube center
- 5.912 in (150 mm)
- 2.267 in (58 mm)
- 3.25 in (83 mm), starred
- 2.25 in (57 mm), starred
- No stated datum for any of the four
- Unlabeled dimensions
- 6.13 in (156 mm), starred
- 1.57 in (40 mm), starred
- 0.57 in (14 mm), starred
- Without the back cover
- Deduct 0.11 in from each starred dimension, with no metric value given for the deduction
- Shade bracket and fixing
- Shade bracket ships with the shade, and a sub-bracket and ceiling fasteners are labeled without fastener size or type
- Mounting
- Ceiling mount drawn, with Lutron noting the bracket also supports wall mounting
- Clearances
- Factory-supplied shades have the clearances they need
- The installer keeps them once adjustment features are used
- Not every adjustment is available at maximum roll diameter
- Title block
- Code CMR-C, scale 1/1, view 1, revision A, no date printed
- File formats
- PDF, DWG and DXF
Questions about document 085636
The answers come from Lutron document 085636 and New Way's record of it.
What is Lutron document 085636?
Lutron's one-page section, view 1 under code CMR-C, with no date printed and the shade bracket shipped with the shade.
Which revision of 085636 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085636 cover?
Lutron Manual roller shades in the Commercial Contract Manual drive class.
What head space does drawing 085636 give?
Lutron document 085636 labels a bracket height with fascia of 8.06 in (204 mm).
- Bracket depth with fascia: 6.13 in (156 mm)
- Fascia depth: 1.06 in (27 mm)
- Fascia and back cover both called out as 8 in
Which tubes does Lutron drawing 085636 allow?
Lutron document 085636 shows a Ø2.56 in (65 mm) tube with two optional sizes.
- Optional: Ø2.65 in (67 mm) or Ø3.00 in (77 mm)
- Maximum roll-up: Ø3.35 in (85 mm)
What changes if the back cover is not installed?
Lutron document 085636 says to deduct 0.11 in from every starred dimension when the back cover is left off.
- Two 6.13 in (156 mm) dimensions
- Tube centers 3.25 in (83 mm) and 2.25 in (57 mm)
- Unlabeled 1.57 in (40 mm) and 0.57 in (14 mm)
Which bracket ships with the shade in Lutron drawing 085636?
Lutron document 085636 notes that the shade bracket ships with the shade. Drawing 085636 also labels a sub-bracket and ceiling fasteners.
The bracket supports wall mounting as well as the ceiling mount drawn.
How deep is the fascia in Lutron drawing 085636?
Lutron document 085636 labels a fascia depth of 1.06 in (27 mm) on a dual fascia called out as 8 in. The bracket height with fascia is 8.06 in (204 mm).
Other Manual Commercial Contract Manual CAD drawings
CAD drawings for the same Manual Commercial Contract Manual drive class:
All 20 Manual roller shade CAD drawingsDocuments used with 085636
Lutron document 085635 is the manual dual-shade section with fascia and back cover, and 085380 the motorized dual-shade pocket section. Lutron document 085492 draws the Contract Roller Motorized dual and dual coupled sub-bracket; 048710 covers dual fascia removal.
Revisions of 085636
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085636, and what to read next
Lutron document 085636 gives no fastener sizes, no shade widths and no installation steps.
Publisher and citation for document 085636
Lutron Electronics Co., Inc. publishes document 085636, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron is a trademark of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Manual roller shades?
New Way supplies and installs Lutron Manual roller shades in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085636 filled in.
