You searched and this document matched it.
See all results085716 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Palladiom Wire-Free Roller Shades CAD Drawing: Jamb Mount Section View (085716)
Lutron's section view of the Palladiom Wire-Free roller shade on a jamb mount, drawn at 1/2 scale.
Lutron 085716 Rev A, Palladiom Wire-Free Roller Shades CAD Drawing: Jamb Mount Section View. https://assets.lutron.com/a/documents/085716.pdf, via https://newwaykl.com/resources/lutron/roller-shades/palladiom-wire-free/lutron-palladiom-wire-free-roller-shades-cad-drawing-085716/
About document 085716
Lutron drawing 085716, Rev A, view 1, is the jamb mount shade section view: minimum recommended jamb depth, tube and maximum roll-up diameters, two clearance callouts, four unlabeled dimensions, a legend and the clearance note.
What drawing 085716 covers
Lutron document 085716 has these nine sections, all on its one page.
- Sheet header: Palladiom Wire-Free shade, jamb mount shade
- Section view: glazing (typical), hembar (varies)
- Minimum recommended jamb depth
- Tube and maximum roll-up diameters
- Minimum clearance required and minimum recommended clearance
- Further dimensions printed without labels
- Legend (top view) with callouts 1 and 2
- Clearance note for the master technician
- Title block: drawing number, scale, view and revision
Specifications in 085716
Lutron document 085716 prints 19 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
Section view (view 1)
PDF page 1 of 085716, opens in a new tab- Minimum recommended jamb depth
- 3.88 in (98 mm)
- Tube
- 2.25 in (57 mm) diameter
- Maximum roll-up
- 3.25 in (83 mm) diameter
- Minimum clearance required
- 0.50 in (12 mm)
- Minimum recommended clearance
- 0.50 in (12 mm)
- Unlabeled dimension
- 2.13 in (54 mm)
- Unlabeled dimension
- 2.50 in (63 mm)
- Dimension in parentheses, without a label
- 3.75 in (95 mm)
- Dimension in parentheses, without a label
- 0.875 in (22 mm)
- Glazing
- Typical
- Hembar
- Varies
Legend (top view)
PDF page 1 of 085716, opens in a new tab- Callouts
- 1 and 2
Title block
PDF page 1 of 085716, opens in a new tab- Sheet header
- Palladiom Wire-Free shade, jamb mount shade
- Drawing title
- Palladiom Wire-Free shade, section view
- Drawing number
- 085716
- Scale
- 1/2
- View
- 1
- Revision
- A
- Clearance note
- A shade installed as the factory supplies it has the clearances it needs to operate; the master technician keeps them after installation
Facts Lutron states in 085716
The values Lutron document 085716 states, as published:
- Subject
- Section view of the Palladiom Wire-Free shade on a jamb mount, glazing labeled typical, hembar labeled varies
- Scale, view and revision
- 1/2 scale, view 1, revision A, no date printed
- Minimum recommended jamb depth
- 3.88 in (98 mm)
- Tube diameter
- 2.25 in (57 mm)
- Maximum roll-up diameter
- 3.25 in (83 mm)
- Minimum clearance required
- 0.50 in (12 mm)
- Minimum recommended clearance
- 0.50 in (12 mm)
- Dimensions without labels
- 2.13 in (54 mm) and 2.50 in (63 mm)
- Dimensions in parentheses without labels
- 3.75 in (95 mm) and 0.875 in (22 mm)
- Legend
- A top view legend with callouts 1 and 2
- Clearances
- A shade installed as the factory supplies it has the clearances it needs to operate. The master technician keeps them after installation.
- File formats
- PDF, DWG and DXF
Questions about document 085716
The answers come from Lutron document 085716 and New Way's record of it.
What is Lutron document 085716?
Lutron's section view of the Palladiom Wire-Free roller shade on a jamb mount, drawn at 1/2 scale. Lutron drawing 085716, Rev A, view 1, is the jamb mount shade section view: minimum recommended jamb depth, tube and maximum roll-up diameters, two clearance callouts, four unlabeled dimensions, a legend and the clearance note.
Which revision of 085716 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085716 cover?
Lutron Palladiom Wire-Free roller shades.
How deep must the jamb be for a Palladiom Wire-Free jamb mount?
Lutron drawing 085716 dimensions a minimum recommended jamb depth of 3.88 in (98 mm). Lutron marks the figure as a recommendation.
How large is the shade roll?
Lutron drawing 085716 prints a tube diameter of 2.25 in (57 mm) and a maximum roll-up diameter of 3.25 in (83 mm).
What clearances does the section call for?
Lutron drawing 085716 prints two 0.50 in (12 mm) callouts: one labeled minimum clearance required and one labeled minimum recommended clearance.
Does the drawing fix the hembar size?
No. Lutron drawing 085716 labels the hembar as varying and prints no dimension for the hembar itself.
What does the section show around the shade?
Lutron drawing 085716 draws the shade in section with the glazing, labeled typical, and the hembar, labeled as varying. Lutron adds a top view legend with callouts 1 and 2.
Other Palladiom Wire-Free CAD drawings
CAD drawings for the same Palladiom Wire-Free system:
All 31 Palladiom Wire-Free CAD drawingsDocuments used with 085716
Lutron drawings 085715 and 085717 are the jamb mount elevation and plan views, and 085721 the jamb bracket detail. Lutron drawings 085732 and 085710 are the dual jamb and wall mount sections; 085708 is the specification submittal.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085708Roller Shades Specification Submittal | Specification Submittal | K | Jun 2025 |
| 045908Roller Shades Installation Guide: Electronic Drive Unit (EDU) Replacement | Installation Guide | A | Jul 2022 |
| 045913Roller Shades Installation Guide: Setup | Installation Guide | C | Sep 2023 |
| 048868Roller Shades Application Note: Shade Drive Sealed Battery Removal and Replacement | Application Note | A | Jul 2026 |
| 048802Roller Shades Application Note: Shading System, Door Applications | Application Note | A | Oct 2021 |
| 3686194Roller Shades Product Brochure | Product Brochure | C | Mar 2025 |
| 3671319Sivoia QS Product Brochure: Residential Shading Solutions | Product Brochure | K | Feb 2023 |
Revisions of 085716
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085716, and what to read next
Lutron drawing 085716 gives the jamb depth, roll diameters and clearances only, no bracket sizes, fixings or minimum shade sizes.
Publisher and citation for document 085716
Lutron Electronics Co., Inc. publishes document 085716, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Palladiom are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Palladiom Wire-Free?
New Way supplies and installs Lutron Palladiom Wire-Free shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085716 filled in.
