You searched and this document matched it.
See all results085721 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Palladiom Wire-Free Roller Shades CAD Drawing: Jamb Bracket Drive and Idler Detail (085721)
Lutron's detail drawing of the idler and operator jamb brackets for the Palladiom Wire-Free roller shade.
Lutron 085721 Rev A, Palladiom Wire-Free Roller Shades CAD Drawing: Jamb Bracket Drive and Idler Detail. https://assets.lutron.com/a/documents/085721.pdf, via https://newwaykl.com/resources/lutron/roller-shades/palladiom-wire-free/lutron-palladiom-wire-free-roller-shades-cad-drawing-085721/
About document 085721
Lutron drawing 085721, Rev A, is the jamb bracket detail at 1/2 scale: bracket height, depth and width for both brackets, one open bracket depth and the clearance note for the master technician.
What drawing 085721 covers
Lutron document 085721 has these five sections, all on its one page.
- Detail of the idler and operator jamb brackets
- Bracket height, depth and width of each bracket
- Open bracket depth
- Clearance note for the master technician
- Title block: drawing number, scale and revision
Specifications in 085721
Lutron document 085721 prints eleven values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
Dimensions
PDF page 1 of 085721, opens in a new tab- Bracket height, both brackets
- 2.00 in (51 mm)
- Bracket depth, both brackets
- 3.13 in (79 mm)
- Bracket width, both brackets
- 0.75 in (19 mm)
- Open bracket depth, printed once
- 5.50 in (140 mm)
Title block
PDF page 1 of 085721, opens in a new tab- Sheet header
- Palladiom Wire-Free shade
- Drawing title
- Palladiom Wire-Free idler and operator jamb brackets
- Drawing number
- 085721
- Scale
- 1/2
- Revision
- A
- Sheet type
- Detail drawing
- Clearance note
- A shade installed as the factory supplies it has the clearances it needs to operate; the master technician keeps them after installation
Facts Lutron states in 085721
The values Lutron document 085721 states, as published:
- What the drawing shows
- The idler and operator jamb brackets of a Palladiom Wire-Free shade, each in detail at 1/2 scale
- Scale and revision
- Scale 1/2, drawing 085721, revision A, no date printed
- Bracket height
- 2.00 in (51 mm) on both brackets
- Bracket depth
- 3.13 in (79 mm) on both brackets
- Bracket width
- 0.75 in (19 mm) on both brackets
- Open bracket depth
- 5.50 in (140 mm), printed once
- Views
- Several views without titles, none labeled as the idler bracket or the operator bracket
- Clearances
- A shade installed as the factory supplies it has the clearances it needs to operate. The master technician keeps them after installation.
- Not on the sheet
- Fixing sizes, hole positions, jamb depth and shade size limits are not stated in the document
- File formats
- PDF, DWG and DXF
Questions about document 085721
The answers come from Lutron document 085721 and New Way's record of it.
What is Lutron document 085721?
Lutron's detail drawing of the idler and operator jamb brackets for the Palladiom Wire-Free roller shade. Lutron drawing 085721, Rev A, is the jamb bracket detail at 1/2 scale: bracket height, depth and width for both brackets, one open bracket depth and the clearance note for the master technician.
Which revision of 085721 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085721 cover?
Lutron Palladiom Wire-Free roller shades.
How big is the Palladiom Wire-Free jamb bracket?
Lutron drawing 085721 dimensions each jamb bracket at 2.00 in (51 mm) high, 3.13 in (79 mm) deep and 0.75 in (19 mm) wide.
Are the idler and operator jamb brackets the same size?
Lutron drawing 085721 gives both brackets the same height, depth and width; the open bracket depth is printed once.
- Height: 2.00 in (51 mm)
- Depth: 3.13 in (79 mm)
- Width: 0.75 in (19 mm)
How much depth does the jamb bracket need when it is open?
Lutron drawing 085721 prints an open bracket depth of 5.50 in (140 mm). Lutron's sheet does not say which bracket opens or which part moves.
Does drawing 085721 give screw sizes or hole positions?
No, Lutron drawing 085721 prints the bracket height, depth, width and open depth only. Fixing sizes and hole positions are not stated in the document.
Who is responsible for clearances after the shade is installed?
Lutron drawing 085721 states that a shade installed as supplied by the factory has the clearances it needs. Lutron's note makes the master technician keep them after installation.
Other Palladiom Wire-Free CAD drawings
CAD drawings for the same Palladiom Wire-Free system:
All 31 Palladiom Wire-Free CAD drawingsDocuments used with 085721
Lutron drawings 085715, 085717 and 085716 are the jamb mount elevation, plan and section views; 085708 is the specification submittal. Lutron drawings 085719, 085718, 085729 and 085728 are the wall mount bracket details, and 045913 the setup installation guide.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085708Roller Shades Specification Submittal | Specification Submittal | K | Jun 2025 |
| 045913Roller Shades Installation Guide: Setup | Installation Guide | C | Sep 2023 |
| 045908Roller Shades Installation Guide: Electronic Drive Unit (EDU) Replacement | Installation Guide | A | Jul 2022 |
| 048868Roller Shades Application Note: Shade Drive Sealed Battery Removal and Replacement | Application Note | A | Jul 2026 |
| 048802Roller Shades Application Note: Shading System, Door Applications | Application Note | A | Oct 2021 |
| 3686194Roller Shades Product Brochure | Product Brochure | C | Mar 2025 |
| 045411Sivoia QS 4-Group RF Remote Control Installation Guide | Installation Guide | D | Jan 2015 |
| 3671319Sivoia QS Product Brochure: Residential Shading Solutions | Product Brochure | K | Feb 2023 |
Revisions of 085721
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085721, and what to read next
Lutron drawing 085721 gives the outer bracket dimensions only, with no fixing sizes, hole positions, jamb depth or shade section.
Publisher and citation for document 085721
Lutron Electronics Co., Inc. publishes document 085721, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Palladiom are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Palladiom Wire-Free?
New Way supplies and installs Lutron Palladiom Wire-Free shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085721 filled in.
