You searched and this document matched it.
See all results085603 · CAD Drawing · Rev B · English · PDF, DWG, DXF
Lutron Palladiom Roller Shades CAD Drawing: Wired Shade, Wall Mount, Plan View (085603)
Lutron's plan view of a Palladiom roller shade on a wall mount, with a 20.00 in (508 mm) minimum width of the shade.
Lutron 085603 Rev B, Palladiom Roller Shades CAD Drawing: Wired Shade, Wall Mount, Plan View. https://assets.lutron.com/a/documents/palladiom_shade_wall_mount_plan_view_085603.pdf, via https://newwaykl.com/resources/lutron/roller-shades/palladiom/lutron-palladiom-roller-shades-cad-drawing-085603/
About document 085603
Lutron drawing 085603, revision B, is the wall mount plan view at scale 1/4: minimum shade width, minimum light gap, two unlabeled dimensions and the clearance note.
What drawing 085603 covers
Lutron document 085603 has these six sections, all on its one page.
- Sheet header: Palladiom shade, wall mount shade
- Plan view: minimum width of the shade
- Minimum light gap
- Two further dimensions printed without labels
- Clearance note for the master technician
- Title block: drawing number, scale, view and revision
Specifications in 085603
Lutron document 085603 prints eleven values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
View PLAN (plan view)
PDF page 1 of 085603, opens in a new tab- Minimum width of the shade
- 20.00 in (508 mm)
- Minimum light gap
- 0.50 in (13 mm)
- Unlabeled dimension
- 3.375 in (86 mm)
- Unlabeled dimension
- 3.00 in (76 mm)
- Clearances
- A shade installed as the factory supplies it has the clearances it needs; the master technician keeps them after installation
Title block
PDF page 1 of 085603, opens in a new tab- Sheet header
- Palladiom shade, wall mount shade
- Drawing title
- Plan view
- Drawing number
- 085603
- Scale
- 1/4
- View
- Plan
- Revision
- B
Facts Lutron states in 085603
The values Lutron document 085603 states, as published:
- What the drawing shows
- A plan view of a Palladiom roller shade on its wall mount bracket
- Minimum width of the shade
- 20.00 in (508 mm)
- Minimum light gap
- 0.50 in (13 mm), printed as .50 in
- Other printed dimensions
- 3.375 in (86 mm) and 3.00 in (76 mm), both unlabeled
- Clearances
- A factory-supplied shade has the clearances it needs, and the master technician keeps them after installation
- Scale, view and revision
- Scale 1/4, view PLAN, revision B, no date printed
- Shade and power type
- The sheet names a Palladiom shade only, though Lutron files it with the Palladiom wired shade CAD drawings
- File formats
- PDF of one page, DWG and DXF
- Not on the sheet
- Shade height, tube size, bracket dimensions, fixing sizes and wiring are not stated in the document
Questions about document 085603
The answers come from Lutron document 085603 and New Way's record of it.
What is Lutron drawing 085603?
Lutron's one-page plan of a Palladiom shade on a wall mount, marked PLAN in the title block's view box. Lutron prints no date on the sheet.
Which revision of 085603 is current?
Rev B is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085603 cover?
Lutron Palladiom roller shades.
What is the minimum width of a Palladiom shade on the plan?
Lutron drawing 085603 prints a minimum width of the shade of 20.00 in (508 mm). Lutron drawing 085603 gives no maximum width.
What light gap does drawing 085603 show?
Lutron drawing 085603 prints a minimum light gap of 0.50 in (13 mm), written on the sheet as .50 in.
Who is responsible for clearances after installation?
Lutron drawing 085603 states that a shade installed as the factory supplies it has the clearances it needs to operate. Lutron gives the master technician the job of keeping those clearances after installation.
What are the 3.375 in and 3.00 in figures on drawing 085603?
Lutron drawing 085603 prints 3.375 in (86 mm) and 3.00 in (76 mm) without labels, so the sheet does not say what each measures. Open Lutron drawing 085580, the matching section view CAD drawing, beside the plan.
Can I get drawing 085603 as a CAD file?
Yes, Lutron publishes drawing 085603 as a one-page PDF with matching DWG and DXF files. The plan can then be placed at scale rather than redrawn.
Other Palladiom CAD drawings
CAD drawings for the same Palladiom system:
All 38 Palladiom CAD drawingsDocuments used with 085603
Lutron drawings 085583 and 085580 are the matching elevation and section views of the Palladiom wall mount shade. Lutron drawings 085587 and 085650 are the end bracket and wire housing details, and 085560 the specification submittal.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085560Roller Shades Specification Submittal | Specification Submittal | M | Jun 2025 |
| 045694Roller Shades Installation Guide: Shades Replacement Roller | Installation Guide | A | Apr 2019 |
| 045770Roller Shades Installation Guide: Wire Housing | Installation Guide | A | May 2019 |
| Roller Shades Revit Family: Wall Mount | Revit Family | ||
| Roller Shades Revit Family: Ceiling Mount | Revit Family | ||
| Roller Shades Revit Family: Dual Shades, Ceiling Mount | Revit Family | ||
| Roller Shades Revit Family: Dual Shades, Wall Mount | Revit Family | ||
| Roller Shades Revit Family: Jamb Mount | Revit Family | ||
| 085274Sivoia QS Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| 048846Sivoia QS Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
Revisions of 085603
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| B | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085603, and what to read next
Lutron drawing 085603 gives minimum width and light gap only, not shade height, head section, bracket sizes, fixings or wiring.
Publisher and citation for document 085603
Lutron Electronics Co., Inc. publishes document 085603, Rev B, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Palladiom are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Palladiom?
New Way supplies and installs Lutron Palladiom shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085603 filled in.
