You searched and this document matched it.
See all results085597 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Palladiom Roller Shades CAD Drawing: Wired Shade, Dual Jamb Mount, Section View (085597)
Lutron's dual jamb mount section view CAD drawing of two wired Palladiom roller shades between the window jambs.
Lutron 085597 Rev A, Palladiom Roller Shades CAD Drawing: Wired Shade, Dual Jamb Mount, Section View. https://assets.lutron.com/a/documents/palladiom_shade_dual_jamb_section_view_085597.pdf, via https://newwaykl.com/resources/lutron/roller-shades/palladiom/lutron-palladiom-roller-shades-cad-drawing-085597/
About document 085597
Lutron drawing 085597, Rev A, is the section of two wired Palladiom shades on a dual jamb mount: minimum recommended jamb depth, tube diameter and maximum rollup, four tube center dimensions, clearances, hembars and glazing.
What drawing 085597 covers
Lutron document 085597 has these eight sections, all on its one page.
- Section view: dual jamb mount shades
- Tube diameter and maximum rollup
- Tube center dimensions
- Minimum recommended jamb depth
- Clearances and reference dimension
- Hembars and glazing
- Legend (top view)
- Installer clearance note
Specifications in 085597
Lutron document 085597 prints 17 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
Section view, view 1, scale 1/2
PDF page 1 of 085597, opens in a new tab- Minimum recommended jamb depth
- 5.875 in (149 mm)
- Tube diameter
- Ø2.00 in (51 mm), printed for each shade
- Max rollup
- Ø3.00 in (76 mm), printed for each shade
- Tube center
- 2.00 in (51 mm)
- Tube center
- 2.375 in (60 mm)
- Tube center
- 4.375 in (111 mm)
- Tube center
- 4.875 in (124 mm)
- Minimum recommended clearance
- 0.50 in (13 mm), printed twice
- Minimum clearance required
- 0.50 in (13 mm)
- Reference dimension
- 0.875 in (22 mm), with the 0.50 in minimum recommended clearance
- Hembar
- Varies (two hembars drawn)
- Glazing
- Typical
Legend (top view)
PDF page 1 of 085597, opens in a new tab- Markers
- 1 and 2
Title block
PDF page 1 of 085597, opens in a new tab- Drawing number
- 085597
- Scale
- 1/2
- View
- 1
- Revision
- A
Facts Lutron states in 085597
The values Lutron document 085597 states, as published:
- What the drawing shows
- A section through two Palladiom shades between the jambs, with the glazing and both hembars. A top-view legend is keyed 1 and 2.
- Minimum recommended jamb depth
- 5.875 in (149 mm)
- Tube diameter
- Ø2.00 in (51 mm), each shade
- Maximum rollup diameter
- Ø3.00 in (76 mm), each shade
- Minimum recommended clearance
- 0.50 in (13 mm), printed twice
- Minimum clearance required
- 0.50 in (13 mm)
- Reference dimension
- 0.875 in (22 mm), noted with the 0.50 in minimum recommended clearance
- Tube center dimensions
- Four values, each labeled tube center:
- 2.00 in (51 mm)
- 2.375 in (60 mm)
- 4.375 in (111 mm)
- 4.875 in (124 mm)
- Hembar
- Varies, on both shades
- Clearance responsibility
- A shade installed as the factory supplies it has the clearances it needs to operate. The master technician keeps those clearances after installation.
- Title block
- Drawing 085597, view 1, scale 1/2, revision A
Questions about document 085597
The answers come from Lutron document 085597 and New Way's record of it.
What is Lutron document 085597?
Lutron's one-sheet section through two Palladiom shades mounted between the jambs, drawn as view 1 at scale 1/2. Lutron draws the glazing and both hembars, with a top-view legend keyed 1 and 2.
Lutron publishes the sheet as a PDF with matching DWG and DXF files.
Which revision of 085597 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085597 cover?
Lutron Palladiom roller shades.
How deep must the reveal be for two jamb-mounted shades?
Lutron drawing 085597 prints a minimum recommended jamb depth of 5.875 in (149 mm).
What clearances does drawing 085597 call for?
Lutron drawing 085597 prints three clearance callouts and a reference dimension.
- 0.50 in (13 mm) minimum clearance required
- 0.50 in (13 mm) minimum recommended clearance, twice
- 0.875 in (22 mm) reference dimension, carrying the same 0.50 in minimum
Lutron makes the master technician responsible for keeping the clearances after installation.
What are the tube center dimensions?
Lutron drawing 085597 prints four tube center dimensions, without naming the surface each is measured from.
- 2.00 in (51 mm) and 2.375 in (60 mm)
- 4.375 in (111 mm)
- 4.875 in (124 mm)
What tube and roll-up sizes does each shade use?
Lutron drawing 085597 prints a Ø2.00 in (51 mm) tube diameter and a Ø3.00 in (76 mm) maximum rollup for each shade.
Does drawing 085597 fix the hembar size?
Lutron drawing 085597 marks both hembars as varying and gives no hembar dimension.
Other Palladiom CAD drawings
CAD drawings for the same Palladiom system:
All 38 Palladiom CAD drawingsDocuments used with 085597
Lutron drawing 085732 is the wire-free dual jamb section, 085581 the single jamb section and 085588 the jamb bracket detail. Lutron drawings 085605, 085598 and 085601 are the dual jamb and wall, dual ceiling and dual wall mount sections.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085560Roller Shades Specification Submittal | Specification Submittal | M | Jun 2025 |
| 045694Roller Shades Installation Guide: Shades Replacement Roller | Installation Guide | A | Apr 2019 |
| 045770Roller Shades Installation Guide: Wire Housing | Installation Guide | A | May 2019 |
| Roller Shades Revit Family: Ceiling Mount | Revit Family | ||
| Roller Shades Revit Family: Dual Shades, Ceiling Mount | Revit Family | ||
| Roller Shades Revit Family: Dual Shades, Wall Mount | Revit Family | ||
| Roller Shades Revit Family: Jamb Mount | Revit Family | ||
| Roller Shades Revit Family: Wall Mount | Revit Family | ||
| 085274Sivoia QS Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| 048846Sivoia QS Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
Revisions of 085597
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085597, and what to read next
Lutron drawing 085597 gives the section only, with no bracket size, fastener, elevation or wiring detail.
Publisher and citation for document 085597
Lutron Electronics Co., Inc. publishes document 085597, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Palladiom are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Palladiom?
New Way supplies and installs Lutron Palladiom shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085597 filled in.
