You searched and this document matched it.
See all results085605 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Palladiom Roller Shades CAD Drawing: Wired Shade, Dual Jamb and Wall Mount, Section View (085605)
Lutron's section view CAD drawing of two wired Palladiom shades, one jamb mounted and one wall mounted, at one window.
Lutron 085605 Rev A, Palladiom Roller Shades CAD Drawing: Wired Shade, Dual Jamb and Wall Mount, Section View. https://assets.lutron.com/a/documents/palladiom_shade_dual_jamb_and_wall_section_view_085605.pdf, via https://newwaykl.com/resources/lutron/roller-shades/palladiom/lutron-palladiom-roller-shades-cad-drawing-085605/
About document 085605
Lutron drawing 085605, Rev A, is the dual jamb and wall mount section of two Palladiom shades: minimum recommended jamb depth, tube diameter and maximum rollup, tube center dimensions, clearances, trim, hembars, glazing and legend.
What drawing 085605 covers
Lutron document 085605 has these eight sections, all on its one page.
- Section view: dual jamb and wall mount shades
- Tube diameter and maximum rollup
- Tube center dimensions
- Minimum recommended jamb depth
- Clearances and reference dimensions
- Trim, hembars and glazing
- Legend (top view)
- Installer clearance note
Specifications in 085605
Lutron document 085605 prints 21 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
Section view, view 1, scale 1/2
PDF page 1 of 085605, opens in a new tab- Minimum recommended jamb depth
- 3.875 in (98 mm)
- Dimension without a label
- 3.875 in (98 mm)
- Tube diameter
- Ø2.00 in (51 mm)
- Max rollup
- Ø3.00 in (76 mm)
- Diameter labels printed with inch and millimeter values crossed
- Ø2.00 in (76 mm) max rollup; Ø3.00 in (51 mm) tube diameter, as printed
- Tube center
- 2.375 in (60 mm), printed twice
- Tube center
- 1.50 in (38 mm)
- Tube center
- 2.00 in (51 mm)
- Minimum clearance required
- 0.50 in (13 mm)
- Minimum recommended clearance
- 0.50 in (13 mm), printed twice
- Reference dimension
- 0.875 in (22 mm), printed twice, each with the 0.50 in minimum recommended clearance
- Dimension without a label
- 0.375 in (9 mm)
- Dimension without a label
- 3.50 in (89 mm)
- Trim
- Labeled; no dimension is labeled as the trim's
- Hembar
- Varies (two hembars drawn)
- Glazing
- Typical
Legend (top view)
PDF page 1 of 085605, opens in a new tab- Markers
- 1 and 2
Title block
PDF page 1 of 085605, opens in a new tab- Drawing number
- 085605
- Scale
- 1/2
- View
- 1
- Revision
- A
Facts Lutron states in 085605
The values Lutron document 085605 states, as published:
- What the drawing shows
- A section through two Palladiom shades, one on a jamb mount and one on a wall mount. Lutron draws the glazing, trim and both hembars, with a top-view legend keyed 1 and 2.
- Minimum recommended jamb depth
- 3.875 in (98 mm)
- Maximum rollup diameter
- Ø3.00 in (76 mm)
- Tube diameter
- Ø2.00 in (51 mm)
- Diameter labels printed crossed
- One shade's maximum rollup label prints Ø2.00 in with 76 mm. The same shade's tube diameter label prints Ø3.00 in with 51 mm.
- Minimum clearance required
- 0.50 in (13 mm)
- Minimum recommended clearance
- 0.50 in (13 mm), printed twice
- Reference dimension
- 0.875 in (22 mm), printed twice, each noted with the 0.50 in minimum recommended clearance
- Tube center dimensions
- Three values, each labeled tube center:
- 1.50 in (38 mm)
- 2.00 in (51 mm)
- 2.375 in (60 mm), printed twice
- Other printed dimensions
- 0.375 in (9 mm), 3.50 in (89 mm) and a second 3.875 in (98 mm), printed without labels
- Clearance responsibility
- A shade installed as the factory supplies it has the clearances it needs to operate. The master technician keeps those clearances after installation.
- Title block
- Drawing 085605, view 1, scale 1/2, revision A
Questions about document 085605
The answers come from Lutron document 085605 and New Way's record of it.
What is Lutron document 085605?
Lutron's one-sheet section through a jamb-mounted and a wall-mounted Palladiom shade, drawn as view 1 at scale 1/2. Lutron draws the glazing, the trim and both hembars, with a top-view legend keyed 1 and 2.
Lutron publishes the sheet as a PDF with matching DWG and DXF files.
Which revision of 085605 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085605 cover?
Lutron Palladiom roller shades.
How deep should the jamb be for the jamb-mounted shade?
Lutron drawing 085605 prints a minimum recommended jamb depth of 3.875 in (98 mm).
What clearances does the drawing call for?
Lutron drawing 085605 prints three clearance callouts and two reference dimensions.
- 0.50 in (13 mm) minimum clearance required
- 0.50 in (13 mm) minimum recommended clearance, twice
- 0.875 in (22 mm) reference dimension, twice, carrying the same 0.50 in minimum
Lutron makes the master technician responsible for keeping the clearances after installation.
Are all the diameter labels on drawing 085605 consistent?
Lutron drawing 085605 labels one shade Ø2.00 in (51 mm) tube diameter and Ø3.00 in (76 mm) maximum rollup. Lutron prints the other shade's pair crossed.
The crossed maximum rollup label reads Ø2.00 in beside 76 mm, the tube diameter label Ø3.00 in beside 51 mm.
What tube and roll-up sizes apply?
Lutron drawing 085605 prints a Ø2.00 in (51 mm) tube diameter and a Ø3.00 in (76 mm) maximum rollup. Lutron's inch and millimeter values agree on that pair.
Does the section show trim at the window?
Lutron drawing 085605 labels a trim on the section, along with the glazing and both hembars. Lutron prints no dimension labeled as the trim's.
Other Palladiom CAD drawings
CAD drawings for the same Palladiom system:
All 38 Palladiom CAD drawingsDocuments used with 085605
Lutron drawings 085597, 085601 and 085598 are the dual jamb, dual wall and dual ceiling mount sections. Lutron drawings 085581 and 085580 are the single jamb and wall mount sections; 085735 is the wire-free version.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085560Roller Shades Specification Submittal | Specification Submittal | M | Jun 2025 |
| 045694Roller Shades Installation Guide: Shades Replacement Roller | Installation Guide | A | Apr 2019 |
| 045770Roller Shades Installation Guide: Wire Housing | Installation Guide | A | May 2019 |
| Roller Shades Revit Family: Ceiling Mount | Revit Family | ||
| Roller Shades Revit Family: Dual Shades, Ceiling Mount | Revit Family | ||
| Roller Shades Revit Family: Dual Shades, Wall Mount | Revit Family | ||
| Roller Shades Revit Family: Jamb Mount | Revit Family | ||
| Roller Shades Revit Family: Wall Mount | Revit Family | ||
| 085274Sivoia QS Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| 048846Sivoia QS Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
Revisions of 085605
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085605, and what to read next
Lutron drawing 085605 gives the section only, with no bracket size, fastener, elevation or wiring detail.
Publisher and citation for document 085605
Lutron Electronics Co., Inc. publishes document 085605, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Palladiom are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Palladiom?
New Way supplies and installs Lutron Palladiom shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085605 filled in.
