You searched and this document matched it.
See all results085604 · CAD Drawing · Rev C · English · PDF, DWG, DXF
Lutron Palladiom Roller Shades CAD Drawing: Wired Shade, Ceiling Mount, Plan View (085604)
Lutron's ceiling mount plan view CAD drawing of the wired Palladiom roller shade, with its minimum width and light gap.
Lutron 085604 Rev C, Palladiom Roller Shades CAD Drawing: Wired Shade, Ceiling Mount, Plan View. https://assets.lutron.com/a/documents/palladiom_shade_ceiling_mount_plan_view_085604.pdf, via https://newwaykl.com/resources/lutron/roller-shades/palladiom/lutron-palladiom-roller-shades-cad-drawing-085604/
About document 085604
Lutron drawing 085604, Rev C, is the one-sheet ceiling mount plan of the wired Palladiom shade: minimum shade width, minimum light gap, two unlabeled dimensions and the clearance note, with no legend or mounting note.
What drawing 085604 covers
Lutron document 085604 has these seven sections, all on its one page.
- Sheet header: Palladiom shade, ceiling mount shade
- Plan view of the ceiling mount shade
- Minimum width of the shade
- Minimum light gap
- Two further dimensions without labels
- Clearance note for the master technician
- Title block: drawing number, scale, view and revision
Specifications in 085604
Lutron document 085604 prints twelve values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
Sheet header
PDF page 1 of 085604, opens in a new tab- Heading row
- Palladiom shade, ceiling mount shade
- Minimum width of the shade
- 20.00 in (508 mm)
- Minimum light gap
- 0.50 in (13 mm)
- Dimension without a label
- 2.00 in (51 mm)
- Dimension without a label
- 3.375 in (86 mm)
Title block
PDF page 1 of 085604, opens in a new tab- Drawing title
- Palladiom shade
- Drawing number
- 085604
- Scale
- 1/4
- View
- PLAN
- Revision
- C
- View title
- Plan view
- Clearance note
- A shade installed as the factory supplies it has the clearances it needs to operate; the master technician keeps them after installation
Facts Lutron states in 085604
The values Lutron document 085604 states, as published:
- What the drawing shows
- A ceiling-mounted wired Palladiom shade seen from above
- View, scale and revision
- Plan view, view marked PLAN, scale 1/4, revision C, no issue date printed
- Minimum shade width
- 20.00 in (508 mm)
- Minimum light gap
- 0.50 in (13 mm)
- Other printed dimensions
- 2.00 in (51 mm) and 3.375 in (86 mm), printed without labels
- Clearances
- A shade installed as the factory supplies it has the clearances it needs to operate. The master technician keeps those clearances after installation.
- Legend and mounting note
- None on the sheet: the plan carries no legend and no mounting configurations note
- File formats
- One-page PDF, with DWG and DXF files of the same drawing
- Not on the sheet
- Shade height, fixing sizes, bracket positions, a section through the roll and wiring are not stated in the document
Questions about document 085604
The answers come from Lutron document 085604 and New Way's record of it.
What is Lutron document 085604?
Lutron's one-sheet ceiling mount plan of the wired Palladiom shade, with the view marked PLAN at scale 1/4. Lutron prints no issue date, so revision C is the only version marker.
Lutron publishes the sheet as a PDF with matching DWG and DXF files.
Which revision of 085604 is current?
Rev C is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085604 cover?
Lutron Palladiom roller shades.
What is the minimum width of a ceiling-mounted wired Palladiom shade?
Lutron drawing 085604 dimensions a minimum width of the shade of 20.00 in (508 mm). Lutron prints no maximum width on the plan.
Does the plan give fixing positions or screw sizes for the brackets?
Lutron drawing 085604 prints no fixing sizes, screw positions or bracket spacing. Lutron's plan gives the minimum width, the minimum light gap and two unlabeled figures only.
Who is responsible for clearances after the shade is installed?
Lutron drawing 085604 states that a shade installed as the factory supplies it has the clearances it needs to operate. Lutron makes the master technician responsible for keeping those clearances after installation.
How much light gap does the plan show?
Lutron drawing 085604 dimensions a minimum light gap of 0.50 in (13 mm). A designer can expect a narrow strip of light at that gap rather than an edge-to-edge fit.
What do the 2.00 in and 3.375 in figures measure?
Lutron drawing 085604 prints 2.00 in (51 mm) and 3.375 in (86 mm) without labels, so the sheet does not say what either spans. Lutron's PDF shows where each dimension line sits, so check the line on the sheet before using either value.
Other Palladiom CAD drawings
CAD drawings for the same Palladiom system:
All 38 Palladiom CAD drawingsDocuments used with 085604
Lutron drawings 085585 and 085582 are the elevation and section of this ceiling mount, and 085560 the specification submittal. Lutron drawing 085603 is the wall mount plan and 085606 the end and center bracket plan.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085560Roller Shades Specification Submittal | Specification Submittal | M | Jun 2025 |
| 045694Roller Shades Installation Guide: Shades Replacement Roller | Installation Guide | A | Apr 2019 |
| 045770Roller Shades Installation Guide: Wire Housing | Installation Guide | A | May 2019 |
| Roller Shades Revit Family: Ceiling Mount | Revit Family | ||
| Roller Shades Revit Family: Dual Shades, Ceiling Mount | Revit Family | ||
| Roller Shades Revit Family: Dual Shades, Wall Mount | Revit Family | ||
| Roller Shades Revit Family: Jamb Mount | Revit Family | ||
| Roller Shades Revit Family: Wall Mount | Revit Family | ||
| 085274Sivoia QS Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| 048846Sivoia QS Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
Revisions of 085604
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| C | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085604, and what to read next
Lutron drawing 085604 gives no shade height, fixing sizes, bracket spacing or wiring route.
Publisher and citation for document 085604
Lutron Electronics Co., Inc. publishes document 085604, Rev C, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Palladiom are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Palladiom?
New Way supplies and installs Lutron Palladiom shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085604 filled in.
