Contact Us
Opens in a new tab
Back to Sivoia QS documents

085395 · CAD Drawing · Rev A · English · PDF, DWG, DXF

Lutron Sivoia QS Roller 100 CAD Drawing: 4.75″ x 5″ (121 x 127mm) Pocket, Section View

Lutron's section drawing of the Sivoia QS Roller 100/150/300 shade pocket-mounted in the 5 in pocket.

Open PDF, 1 page, opens on assets.lutron.com in a new tabOpen DWG, downloads from assets.lutron.com for CAD softwareOpen DXF, downloads from assets.lutron.com for CAD software

About document 085395

Lutron drawing 085395, revision A, is the section, view 1 at 1/2 scale: the pocket depth and height, the tube and roll-up diameters, tube center and projection figures, and the mounting and clearance notes.

What drawing 085395 covers

Lutron document 085395 has these seven sections, all on its one page.

  1. Section view
  2. Legend (top view) with markers 1 and 2
  3. Clearance note on factory and installer-adjusted clearances
  4. Mounting note, ceiling or wall, wall mount shown
  5. Title block with scale, view and revision
  6. Pocket, tube center, tube diameter and roll-up callouts
  7. Pocket flap, fastener, sub-bracket, hembar and glazing callouts

Specifications in 085395

Lutron document 085395 prints 21 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.

view 1

PDF page 1 of 085395, opens in a new tab
Pocket depth
4.75 in (121 mm)
Pocket height
5.00 in (127 mm)
Pocket flap (optional), size in its name
3 in, inches only
Pocket flap (optional), dimension
2.89 in (74 mm)
Tube diameter
2.56 in (65 mm)
Tube diameter, optional WIDR
3.03 in (77 mm)
Max rollup
3.75 in (95 mm) diameter
Tube center
2.50 in (63 mm)
Tube center
2.19 in (56 mm)
Projection adjust
-0.25 in/+0.25 in, inches only
Unlabeled dimension
0.75 in (19 mm)
Hembar
Varies
Glazing
Typical
Parts labeled
Sub-bracket, ceiling fasteners

Notes

PDF page 1 of 085395, opens in a new tab
Mounting configurations allowed
Ceiling or wall; wall mount shown
Shade installed as supplied by the factory
Has the clearances it needs to operate
Adjustments at maximum roll diameter
Not all available

title block

PDF page 1 of 085395, opens in a new tab
Drawing number
085395
Scale
1/2
View
1
Revision
A

Facts Lutron states in 085395

The values Lutron document 085395 states, as published:

Pocket
Depth 4.75 in (121 mm), height 5.00 in (127 mm)
Pocket flap
Optional 3 in flap, dimensioned 2.89 in (74 mm)
Tube
Diameter 2.56 in (65 mm)
Optional WIDR tube
3.03 in (77 mm)
Maximum roll-up
3.75 in (95 mm) diameter
Tube center
Two values printed, 2.50 in (63 mm) and 2.19 in (56 mm), without saying which face each is measured from
Projection adjust
-0.25 in/+0.25 in, printed in inches only
Other callouts
  • 0.75 in (19 mm) unlabeled
  • Hembar marked as varying, glazing shown as typical
  • Sub-bracket and ceiling fasteners labeled
Mounting
Ceiling or wall mounting per Lutron's note, with the wall mount shown
Clearances
A shade installed as the factory supplies it has the clearances it needs for proper operation
Clearances after adjustment
The installer keeps proper clearances once the adjustment features are used
Adjustments at maximum roll
Not every adjustment is available at the maximum roll diameter
Scale, view and revision
1/2 scale, view 1, revision A
File formats
PDF, DWG and DXF
Not on the drawing
Minimum shade width and height, a light gap and fastener sizes are not printed

Questions about document 085395

The answers come from Lutron document 085395 and New Way's record of it.

What is Lutron document 085395?

Lutron's section drawing of the Sivoia QS Roller 100/150/300 shade pocket-mounted in the 5 in pocket. Lutron drawing 085395, revision A, is the section, view 1 at 1/2 scale: the pocket depth and height, the tube and roll-up diameters, tube center and projection figures, and the mounting and clearance notes.

Which revision of 085395 is current?

Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.

Which roller shades does 085395 cover?

Lutron Sivoia QS roller shades in the Roller 100 drive class.

How big is the 5 in pocket in section?

Lutron drawing 085395 draws the 5 in pocket in section with three pocket figures.

  • Pocket depth: 4.75 in (121 mm)
  • Pocket height: 5.00 in (127 mm)
  • Optional 3 in pocket flap: 2.89 in (74 mm)

What tube and roll-up diameters does the section show?

Lutron drawing 085395 prints three diameters on the section.

  • Tube: 2.56 in (65 mm)
  • Optional WIDR tube: 3.03 in (77 mm)
  • Maximum roll-up: 3.75 in (95 mm)

Where does the tube sit in the pocket?

Lutron drawing 085395 prints tube centers of 2.50 in (63 mm) and 2.19 in (56 mm) and a projection adjust of -0.25 in/+0.25 in. Lutron's sheet does not say which face each is measured from, so take them off the DWG.

Can the bracket mount to the ceiling or the wall?

Lutron's note on drawing 085395 says the bracket supports ceiling or wall mounting; the section shows the wall mount. Lutron's callouts also label ceiling fasteners and a sub-bracket.

Is a pocket flap included?

Lutron drawing 085395 calls out the 3 in pocket flap as optional and dimensions it at 2.89 in (74 mm). The flap's 3 in is printed in inches only, and Lutron's sheet does not say when the flap is used.

Ask about 085395

Other Sivoia QS Roller 100 CAD drawings

CAD drawings for the same Sivoia QS Roller 100 drive class:

DocumentDrive classRevisionDate
085396Roller 100 CAD Drawing: 4.75″ x 5″ (121 x 127mm) Pocket, Elevation ViewSame drive, 4.75 in. x 5 in. (121 x 127mm) Pocket, Elevation ViewPDF, DWG, DXFRev BRoller 100 · Rev B · –Roller 100B
085612Roller 100 CAD Drawing: 4.75″ x 5″ (121 x 127mm) Pocket, Detail DrawingSame system, 4.75 in. x 5 in. (121 x 127mm) Pocket, Detail DrawingPDF, DWG, DXFRev A– · Rev A · –A
085401Roller Shades CAD Drawing: Roller 100 in Armstrong Compatible 5″ Pocket Section ViewSame system, Roller 100 in Armstrong Compatible 5 in. Pocket Section ViewPDF, DWG, DXFRev ARoller 100, Roller 300 · Rev A · –Roller 100, Roller 300A
085831Roller Shades CAD Drawing: Roller 100/150/300 Wall Mount in 5″ Pocket, Wall Mount, Section ViewSame system, Roller 100/150/300 Wall Mount in 5 in. Pocket, Wall Mount, Section ViewPDF, DWG, DXFRev ARoller 100, Roller 300 · Rev A · –Roller 100, Roller 300A
All 142 Sivoia QS CAD drawings

Documents used with 085395

Lutron drawing 085396 is the matching elevation, 085612 the pocket detail and 045627 the chassis installation guide. Lutron's related sheets: pocket brackets 085515, 085516; sub-brackets 085513, 085514; wall mount section 085831; Armstrong pocket section 085401.

DocumentTypeRevisionDate
045627ROLLER 100/150/300 – Pocket Mount Chassis Installation GuideInstallation guide: ROLLER 100/150/300 – Pocket Mount ChassisRev A · Feb 2019Installation Guide · Rev A · Feb 2019Installation GuideAFeb 2019
Roller 100 Installation Guide: Angled Coupler WIDR Tube, Light Gap ReferenceInstallation guide: Angled Coupler WIDR Tube, Light Gap ReferenceRev AInstallation Guide · Rev A · –Installation GuideA
Roller 100 Installation Guide: Angled Coupler, Light Gap Reference 2.5″ TubeInstallation guide: Angled Coupler, Light Gap Reference 2.5 in. TubeRev AInstallation Guide · Rev A · –Installation GuideA
0853144-Group RF Remote Control Specification SubmittalSpecification submittal: 4-Group RF Remote ControlRev C · May 2016Specification Submittal · Rev C · May 2016Specification SubmittalCMay 2016
369847Pico Wireless Control, 4-Button Specification SubmittalSpecification submittal: Pico Wireless Control, 4-ButtonRev K · Mar 2024Specification Submittal · Rev K · Mar 2024Specification SubmittalKMar 2024
Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/LowerRevit family, QS Shading Keypad 3-Group 3-Button with Raise/Lower; Revit family (.rfa)Revit Family · Rev – · –Revit Family
085274Hard Wired Power Supply Specification SubmittalPower for this shadeRev D · Aug 2014Specification Submittal · Rev D · Aug 2014Specification SubmittalDAug 2014
048846Application Note: EU EcoDesign Standby Power InformationLutron's note on EU EcoDesign Standby Power InformationRev A · Nov 2024Application Note · Rev A · Nov 2024Application NoteANov 2024
048863Roller Shades Application Note: Fabric Aesthetic CharacteristicsLutron's note on Fabric Aesthetic CharacteristicsRev A · May 2026Application Note · Rev A · May 2026Application NoteAMay 2026
Revit Family: QS J-Box 35V Power SupplyRevit family, QS J-Box 35V Power Supply; Revit family (.rfa)Revit Family · Rev – · –Revit Family
All 143 Roller 100 documentsAll 246 Sivoia QS documents

Revisions of 085395

This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.

RevisionDateStatus
ANot statedCurrent. The file on assets.lutron.com. Checked 16 Oct 2026.

Not covered in 085395, and what to read next

Lutron drawing 085395 gives the section only: no minimum shade width or height, light gap or fastener size.

  • Elevation: 085396, the same shade in the 5 in pocket
  • Mounting: 045627, the pocket mount chassis installation guide

Publisher and citation for document 085395

Lutron Electronics Co., Inc. publishes document 085395, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.

Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.

Reviewed by Edmond Hong, Technical Specialist, New Way.

Specifying Sivoia QS?

New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.

The form opens with document 085395 filled in.

Ask a New Way specifierWhatsApp a specifier

See Lutron Roller Shades by New Way