You searched and this document matched it.
See all resultsInstallation Guide · Rev A · English · PDF, 1 page, 0.3 MB
Lutron Sivoia QS Roller 100 Installation Guide: Angled Coupler, Light Gap Reference 2.5″ Tube
Lutron's light gap reference for the angled coupler on the 2.5 in tube: Roller 100, 150 and 200CW.
Lutron, Sivoia QS Roller 100 Installation Guide: Angled Coupler, Light Gap Reference 2.5 in. Tube. https://assets.lutron.com/a/documents/light_gap_ref_guide_2.5_tube.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-100-installation-guide-angled-coupler-light-gap-reference-2-5-tube/
About this Sivoia QS guide
Lutron drawing 0281-GNRL-ANG-V, Rev A, is the angled coupler light gap reference guide for the 2.5 in tube: two angle figures, the equal-angle rule and two tables of gaps A and B by total angle.
What this Sivoia QS guide covers
This Sivoia QS guide has these eight sections, all on its one page.
- For use with Roller 100, 150 and 200CW
- Installation rule: equal angles at the coupler bracket
- Concave angle figure: gaps A and B
- Convex angle figure: gaps A and B
- Which gap is regular or reverse roll
- Table: 0 to 15 degree angled coupler
- Table: 0 to 45 degree angled coupler
- Title block: drawing 0281-GNRL-ANG-V, rev A
Specifications in this Sivoia QS guide
This Sivoia QS guide prints 66 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
0 to 15 degree angled coupler
PDF page 1 of this Sivoia QS guide, opens in a new tab- Total angle 0 degrees, light gap A
- 7/8 in (22 mm)
- Total angle 0 degrees, light gap B
- 7/8 in (22 mm)
- Total angle 2 degrees, light gap A
- 7/8 in (22 mm)
- Total angle 2 degrees, light gap B
- 13/16 in (21 mm)
- Total angle 4 degrees, light gap A
- 7/8 in (22 mm)
- Total angle 4 degrees, light gap B
- 13/16 in (21 mm)
- Total angle 6 degrees, light gap A
- 15/16 in (24 mm)
- Total angle 6 degrees, light gap B
- 13/16 in (21 mm)
- Total angle 8 degrees, light gap A
- 15/16 in (24 mm)
- Total angle 8 degrees, light gap B
- 3/4 in (19 mm)
- Total angle 10 degrees, light gap A
- 1.00 in (25 mm)
- Total angle 10 degrees, light gap B
- 3/4 in (19 mm)
- Total angle 12 degrees, light gap A
- 1.00 in (25 mm)
- Total angle 12 degrees, light gap B
- 3/4 in (19 mm)
- Total angle 14 degrees, light gap A
- 1.00 in (25 mm)
- Total angle 14 degrees, light gap B
- 11/16 in (17 mm)
- Total angle 15 degrees, light gap A
- 1.00 in (25 mm)
- Total angle 15 degrees, light gap B
- 11/16 in (17 mm)
0 to 45 degree angled coupler
PDF page 1 of this Sivoia QS guide, opens in a new tab- Total angle 0 degrees, light gap A
- 1 5/16 in (33 mm)
- Total angle 0 degrees, light gap B
- 1 5/16 in (33 mm)
- Total angle 2 degrees, light gap A
- 1 5/16 in (33 mm)
- Total angle 2 degrees, light gap B
- 1 1/4 in (32 mm)
- Total angle 4 degrees, light gap A
- 1 5/16 in (33 mm)
- Total angle 4 degrees, light gap B
- 1 1/4 in (32 mm)
- Total angle 6 degrees, light gap A
- 1 3/8 in (35 mm)
- Total angle 6 degrees, light gap B
- 1 1/4 in (32 mm)
- Total angle 8 degrees, light gap A
- 1 3/8 in (35 mm)
- Total angle 8 degrees, light gap B
- 1 3/16 in (30 mm)
- Total angle 10 degrees, light gap A
- 1 7/16 in (37 mm)
- Total angle 10 degrees, light gap B
- 1 3/16 in (30 mm)
- Total angle 12 degrees, light gap A
- 1 7/16 in (37 mm)
- Total angle 12 degrees, light gap B
- 1 3/16 in (30 mm)
- Total angle 14 degrees, light gap A
- 1 7/16 in (37 mm)
- Total angle 14 degrees, light gap B
- 1 1/8 in (29 mm)
- Total angle 16 degrees, light gap A
- 1 1/2 in (38 mm)
- Total angle 16 degrees, light gap B
- 1 1/8 in (29 mm)
- Total angle 18 degrees, light gap A
- 1 1/2 in (38 mm)
- Total angle 18 degrees, light gap B
- 1 1/8 in (29 mm)
- Total angle 20 degrees, light gap A
- 1 1/2 in (38 mm)
- Total angle 20 degrees, light gap B
- 1 1/16 in (27 mm)
- Total angle 22 degrees, light gap A
- 1 9/16 in (40 mm)
- Total angle 22 degrees, light gap B
- 1 1/16 in (27 mm)
- Total angle 24 degrees, light gap A
- 1 9/16 in (40 mm)
- Total angle 24 degrees, light gap B
- 1 1/16 in (27 mm)
- Total angle 26 degrees, light gap A
- 1 5/8 in (41 mm)
- Total angle 26 degrees, light gap B
- 1.00 in (25 mm)
- Total angle 28 degrees, light gap A
- 1 5/8 in (41 mm)
- Total angle 28 degrees, light gap B
- 1.00 in (25 mm)
- Total angle 30 degrees, light gap A
- 1 11/16 in (43 mm)
- Total angle 30 degrees, light gap B
- 1.00 in (25 mm)
- Total angle 32 degrees, light gap A
- 1 11/16 in (43 mm)
- Total angle 32 degrees, light gap B
- 1.00 in (25 mm)
- Total angle 34 degrees, light gap A
- 1 11/16 in (43 mm)
- Total angle 34 degrees, light gap B
- 15/16 in (24 mm)
- Total angle 36 degrees, light gap A
- 1 3/4 in (44 mm)
- Total angle 36 degrees, light gap B
- 15/16 in (24 mm)
- Total angle 38 degrees, light gap A
- 1 3/4 in (44 mm)
- Total angle 38 degrees, light gap B
- 15/16 in (24 mm)
- Total angle 40 degrees, light gap A
- 1 3/4 in (44 mm)
- Total angle 40 degrees, light gap B
- 7/8 in (22 mm)
- Total angle 42 degrees, light gap A
- 1 13/16 in (46 mm)
- Total angle 42 degrees, light gap B
- 7/8 in (22 mm)
- Total angle 44 degrees, light gap A
- 1 13/16 in (46 mm)
- Total angle 44 degrees, light gap B
- 7/8 in (22 mm)
- Total angle 45 degrees, light gap A
- 1 13/16 in (46 mm)
- Total angle 45 degrees, light gap B
- 13/16 in (21 mm)
Requirements Lutron states in this Sivoia QS guide
What the guide requires for a Sivoia QS Roller 100 shade before and during installation:
- Drawing number and revision
- 0281-GNRL-ANG-V, rev A, printed in the title block
- Sheet title
- Light gap reference guide for 2.5 in tube. The title block reads angled coupler light gap reference guide (2.5 in tube)
- Products named
- Roller 100, Roller 150 and Roller 200CW, as the sheet prints them. Filed in the library under Sivoia QS Roller 100
- Installation rule
- Each coupler is set so the roller tubes on either side make equal angles to the coupler bracket. The shade panels then move smoothly
- Coupler ranges
- Two angled couplers, 0 to 15 degrees and 0 to 45 degrees. Lutron marks the 0 to 15 degree coupler for use when possible, to keep light gaps small
- 0 to 15 coupler gaps
- Gap A runs from 7/8 in (22 mm) at 0 degrees to 1.00 in (25 mm) at 15 degrees. Gap B runs from 7/8 in (22 mm) at 0 degrees to 11/16 in (17 mm) at 15 degrees
- 0 to 45 coupler gaps
- Gap A runs from 1 5/16 in (33 mm) at 0 degrees to 1 13/16 in (46 mm) at 45 degrees. Gap B runs from 1 5/16 in (33 mm) at 0 degrees to 13/16 in (21 mm) at 45 degrees
- Concave angle
- Regular roll gap is A, reverse roll gap is B
- Convex angle
- Regular roll gap is B, reverse roll gap is A
- Table steps
- Total angle listed every 2 degrees. Each table ends with a row at its coupler's maximum, 15 or 45 degrees
- File formats and size
- PDF only, about 321 KB, no DWG or DXF
Questions about this Sivoia QS guide
The answers come from this Sivoia QS guide and New Way's record of it.
What is Lutron drawing 0281-GNRL-ANG-V?
Lutron's one-page light gap reference for the 2.5 in tube, a PDF of about 321 KB, no DWG or DXF. The title block prints rev A and a 2009 copyright line, with no issue date.
Which revision of this Sivoia QS guide is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does this Sivoia QS guide cover?
Lutron Sivoia QS roller shades in the Roller 100 drive class.
Which shades does Lutron's 2.5 in tube light gap reference apply to?
Lutron's sheet is for use with Roller 100, Roller 150 and Roller 200CW on the 2.5 in tube. The library files it under Sivoia QS Roller 100.
How big is the light gap at a 10 degree total angle?
At 10 degrees Lutron's tables give two gaps for each coupler, A and B.
- 0 to 15 coupler: A 1.00 in (25 mm), B 3/4 in (19 mm)
- 0 to 45 coupler: A 1 7/16 in (37 mm), B 1 3/16 in (30 mm)
Which of A and B is the gap for my shade?
Lutron's figures tie the gap letter to the angle type and the roll direction.
- Concave angle: regular roll A, reverse roll B
- Convex angle: regular roll B, reverse roll A
What does Lutron require when the coupler is installed?
Lutron's sheet requires each coupler set so the roller tubes on either side make equal angles to the coupler bracket. The shade panels then move smoothly.
Lutron marks the 0 to 15 degree coupler for use when possible, to keep the gaps small.
Which documents go with this Sivoia QS guide?
Three documents go with this Sivoia QS guide, listed under Documents used with this Sivoia QS guide with the others:
Other Sivoia QS Roller 100 installation guides
Installation guides for the same Sivoia QS Roller 100 drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 045211Roller Shades Installation Guide: Angled Coupler Chassis Addendum | Roller 100, Roller 300 | A | |
| 045315Roller Shades Installation Guide: Angled Coupled Shade, Measuring Template | Roller 20 to 300 | B | |
| Roller 100 Installation Guide: Angled Coupler WIDR Tube, Light Gap Reference | Roller 100 | A | |
| 045000710 Output Power Panel Power Supply (12 V) Installation Guide | Roller 20 to 300 | A | Jul 2025 |
Documents used with this Sivoia QS guide
Lutron's WIDR tube light gap reference is the matching sheet for the other tube, without a document number. Lutron's 045211 and 045315 are the angled coupler addendum and measuring template; 085414 and 085417 the angled coupled plan views.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085414Roller Shades CAD Drawing: Roller 100/150/300 Low Angled Coupled, Plan View | CAD Drawing | A | |
| 085417Roller Shades CAD Drawing: Roller 100/150/300 High Angled Coupled, Plan View | CAD Drawing | A | |
| 085609Roller 100 CAD Drawing: 4″ (103mm) Square Fascia End Cap, Detail Drawing | CAD Drawing | A | |
| 085610Roller 100 CAD Drawing: 4″ (103mm) Square Fascia, Detail Drawing | CAD Drawing | A | |
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| 369847Pico Wireless Control, 4-Button Specification Submittal | Specification Submittal | K | Mar 2024 |
| 085274Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
Revisions of this Sivoia QS guide
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in this Sivoia QS guide, and what to read next
Lutron's sheet gives no coupler part numbers, bracket dimensions or mounting steps.
- WIDR tube: Lutron's WIDR tube light gap reference (no document number)
- Mounting: 045959, the Sivoia QS wired power roller shade mounting guide
Publisher and citation for this Sivoia QS guide
Lutron Electronics Co., Inc. publishes this document and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
