You searched and this document matched it.
See all resultsInstallation Guide · Rev A · English · PDF, 1 page, 0.3 MB
Lutron Sivoia QS Roller 100 Installation Guide: Angled Coupler WIDR Tube, Light Gap Reference
Lutron's light gap reference for the angled coupler on the WIDR tube: Roller 100, 150 and 200CW.
Lutron, Sivoia QS Roller 100 Installation Guide: Angled Coupler WIDR Tube, Light Gap Reference. https://assets.lutron.com/a/documents/light_gap_ref_guide_widr.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-100-installation-guide-angled-coupler-widr-tube-light-gap-reference/
About this Sivoia QS guide
Lutron drawing 0282-GNRL-ANG-V, Rev A, is the angled coupler light gap reference guide for the WIDR tube: two angle figures, the equal-angle rule and two tables of gaps A and B by total angle.
What this Sivoia QS guide covers
This Sivoia QS guide has these eight sections, all on its one page.
- Sheet heading and title block
- For use with Roller 100, 150 and 200CW
- Installation rule: equal angles at the coupler bracket
- Concave angle figure: gaps A and B
- Convex angle figure: gaps A and B
- Which gap is regular or reverse roll
- Table: 0 to 15 degree angled coupler
- Table: 0 to 45 degree angled coupler
Specifications in this Sivoia QS guide
This Sivoia QS guide prints 35 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
0 to 15 degree angled coupler
PDF page 1 of this Sivoia QS guide, opens in a new tab- Coupler angle range
- 0 to 15 degrees
- Total angle 0 degrees
- A 7/8 in (22 mm); B 7/8 in (22 mm)
- Total angle 2 degrees
- A 7/8 in (22 mm); B 13/16 in (21 mm)
- Total angle 4 degrees
- A 15/16 in (24 mm); B 3/4 in (19 mm)
- Total angle 6 degrees
- A 1.00 in (25 mm); B 11/16 in (17 mm)
- Total angle 8 degrees
- A 1 1/16 in (27 mm); B 5/8 in (16 mm)
- Total angle 10 degrees
- A 1 1/8 in (29 mm); B 5/8 in (16 mm)
- Total angle 12 degrees
- A 1 3/16 in (30 mm); B 9/16 in (14 mm)
- Total angle 14 degrees
- A 1 1/4 in (32 mm); B 1/2 in (13 mm)
- Total angle 15 degrees
- A 1 1/4 in (32 mm); B 1/2 in (13 mm)
0 to 45 degree angled coupler
PDF page 1 of this Sivoia QS guide, opens in a new tab- Coupler angle range
- 0 to 45 degrees
- Total angle 0 degrees
- A 1 5/16 in (33 mm); B 1 5/16 in (33 mm)
- Total angle 2 degrees
- A 1 3/8 in (35 mm); B 1 1/4 in (32 mm)
- Total angle 4 degrees
- A 1 3/8 in (35 mm); B 1 3/16 in (30 mm)
- Total angle 6 degrees
- A 1 7/16 in (36 mm); B 1 1/8 in (28 mm)
- Total angle 8 degrees
- A 1 1/2 in (38 mm); B 1 1/16 in (27 mm)
- Total angle 10 degrees
- A 1 9/16 in (39 mm); B 1 1/16 in (27 mm)
- Total angle 12 degrees
- A 1 5/8 in (41 mm); B 1.00 in (25 mm)
- Total angle 14 degrees
- A 1 11/16 in (43 mm); B 15/16 in (24 mm)
- Total angle 16 degrees
- A 1 3/4 in (44 mm); B 7/8 in (22 mm)
- Total angle 18 degrees
- A 1 13/16 in (46 mm); B 7/8 in (22 mm)
- Total angle 20 degrees
- A 1 7/8 in (47 mm); B 13/16 in (20 mm)
- Total angle 22 degrees
- A 1 7/8 in (47 mm); B 3/4 in (19 mm)
- Total angle 24 degrees
- A 1 15/16 in (49 mm); B 3/4 in (19 mm)
- Total angle 26 degrees
- A 2.00 in (51 mm); B 11/16 in (17 mm)
- Total angle 28 degrees
- A 2 1/16 in (52 mm); B 5/8 in (16 mm)
- Total angle 30 degrees
- A 2 1/8 in (54 mm); B 5/8 in (16 mm)
- Total angle 32 degrees
- A 2 3/16 in (55 mm); B 9/16 in (14 mm)
- Total angle 34 degrees
- A 2 1/4 in (57 mm); B 9/16 in (14 mm)
- Total angle 36 degrees
- A 2 5/16 in (58 mm); B 1/2 in (13 mm)
- Total angle 38 degrees
- A 2 5/16 in (58 mm); B 1/2 in (13 mm)
- Total angle 40 degrees
- A 2 3/8 in (60 mm); B 7/16 in (11 mm)
- Total angle 42 degrees
- A 2 7/16 in (61 mm); B 7/16 in (11 mm)
- Total angle 44 degrees
- A 2 1/2 in (63 mm); B 6/16 in (9 mm)
- Total angle 45 degrees
- A 2 1/2 in (63 mm); B 6/16 in (9 mm)
Requirements Lutron states in this Sivoia QS guide
What the guide requires for a Sivoia QS Roller 100 shade before and during installation:
- Drawing number and revision
- 0282-GNRL-ANG-V in the box at the top right of the sheet, revision A in the title block. The DRAWING # field in the title block is left blank
- Shades the sheet is for
- Roller 100, Roller 150 and Roller 200CW (printed as ROLLER100, ROLLER150 and ROLLER200CW)
- Installation rule
- Each coupler is set so the roller tubes on both sides meet the coupler bracket at the same angle. The shade panels then move smoothly
- Concave angle
- Regular roll light gap is dimension A, reverse roll light gap is dimension B
- Convex angle
- Regular roll light gap is dimension B, reverse roll light gap is dimension A
- 0 to 15 coupler gaps
- Light gap A runs from 7/8 in (22 mm) at 0 degrees to 1 1/4 in (32 mm) at 15 degrees. Light gap B runs from 7/8 in (22 mm) at 0 degrees to 1/2 in (13 mm) at 15 degrees
- Preferred coupler
- 0 to 15 degrees, marked for use whenever possible to keep light gaps small
- 0 to 45 coupler gaps
- Light gap A runs from 1 5/16 in (33 mm) at 0 degrees to 2 1/2 in (63 mm) at 45 degrees. Light gap B runs from 1 5/16 in (33 mm) at 0 degrees to 6/16 in (9 mm) at 45 degrees, as printed
- Table steps
- Both tables list the total angle in 2 degree steps. The last row sits at the coupler's maximum, 15 or 45 degrees
- File format
- PDF only, one page, about 319 KB, no DWG or DXF
- Copyright year
- 2009, in the title block, with no issue date printed
Questions about this Sivoia QS guide
The answers come from this Sivoia QS guide and New Way's record of it.
What is Lutron drawing 0282-GNRL-ANG-V?
Lutron's one-page light gap reference for the WIDR tube, a PDF of about 319 KB, no DWG or DXF. The title block prints rev A and a 2009 copyright, with no issue date.
Which revision of this Sivoia QS guide is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does this Sivoia QS guide cover?
Lutron Sivoia QS roller shades in the Roller 100 drive class.
Which shades does Lutron drawing 0282-GNRL-ANG-V apply to?
Lutron prints the sheet for use with Roller 100, Roller 150 and Roller 200CW shades on the WIDR tube. Lutron publishes a separate light gap reference for the angled coupler on the 2.5 in tube.
What light gap does the 0 to 15 degree angled coupler give?
Lutron's table runs gap A from 7/8 in (22 mm) at 0 degrees to 1 1/4 in (32 mm) at 14 and 15 degrees.
- Light gap B: 7/8 in (22 mm) at 0 degrees
- Light gap B: 1/2 in (13 mm) at 14 and 15 degrees
- Lutron marks this coupler for use whenever possible, to keep gaps small
How do I know whether A or B is my light gap?
Lutron's sheet ties the dimension to the angle type and the roll direction.
- Concave angle: regular roll A, reverse roll B
- Convex angle: regular roll B, reverse roll A
What does Lutron require when the coupler is installed?
Lutron's sheet requires each coupler set so the tubes on both sides meet the coupler bracket at the same angle. The shade panels then move smoothly.
Which documents go with this Sivoia QS guide?
Three documents go with this Sivoia QS guide, listed under Documents used with this Sivoia QS guide with the others:
Other Sivoia QS Roller 100 installation guides
Installation guides for the same Sivoia QS Roller 100 drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 045627ROLLER 100/150/300 – Pocket Mount Chassis Installation Guide | Roller 100, Roller 300 | A | Feb 2019 |
| Roller 100 Installation Guide: Angled Coupler, Light Gap Reference 2.5″ Tube | Roller 100 | A | |
| 045211Roller Shades Installation Guide: Angled Coupler Chassis Addendum | Roller 100, Roller 300 | A | |
| 045000710 Output Power Panel Power Supply (12 V) Installation Guide | Roller 20 to 300 | A | Jul 2025 |
Documents used with this Sivoia QS guide
Lutron's 2.5 in tube light gap reference is the matching sheet for the other tube, a one-page installation guide. Lutron document 045627 is the Roller 100/150/300 pocket mount chassis installation guide.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085609Roller 100 CAD Drawing: 4″ (103mm) Square Fascia End Cap, Detail Drawing | CAD Drawing | A | |
| 085610Roller 100 CAD Drawing: 4″ (103mm) Square Fascia, Detail Drawing | CAD Drawing | A | |
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| 369847Pico Wireless Control, 4-Button Specification Submittal | Specification Submittal | K | Mar 2024 |
| 085274Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
| 08533510-Output Smart Panel Specification Submittal | Specification Submittal | D | Apr 2020 |
| Roller Shades Wiring Diagram: Multiple Shades per Single QS Smart Panel | Wiring Diagram |
Revisions of this Sivoia QS guide
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in this Sivoia QS guide, and what to read next
Lutron drawing 0282-GNRL-ANG-V gives the light gap at the coupler only, not the bracket fixings, shade mounting or wiring.
Publisher and citation for this Sivoia QS guide
Lutron Electronics Co., Inc. publishes this document and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
