You searched and this document matched it.
See all results085424 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Roller 64 CAD Drawing: Dual Mount Shade in 6″ x 9″ Pocket, Section View (085424)
Lutron's section of a Roller 64 dual mount shade in a 6 in x 9 in pocket, view 1.
Lutron 085424 Rev A, Sivoia QS Roller 64 CAD Drawing: Dual Mount Shade in 6 in. x 9 in. Pocket, Section View. https://assets.lutron.com/a/documents/085424.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-64-cad-drawing-085424/
About document 085424
Lutron drawing 085424, revision A, is the Roller 64 dual mount pocket section at 1/2 scale: pocket depth and height, tube diameter and roll-up, tube center dimensions, labeled parts and notes on mounting and clearances.
What drawing 085424 covers
Lutron document 085424 has these seven sections, all on its one page.
- Section view of the shade in its pocket
- Legend keyed to the top view
- Pocket depth and pocket height
- Tube diameter, maximum roll-up and tube centers
- Labels: bracket, fasteners, pocket flap, hanger, hembar
- Notes on clearances and mounting positions
- Title block: scale, view, number and revision
Specifications in 085424
Lutron document 085424 prints 21 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
Section view, view 1
PDF page 1 of 085424, opens in a new tab- Pocket depth
- 6.00 in (152 mm)
- Pocket height
- 9.00 in (229 mm)
- Tube diameter
- 1.67 in (42 mm)
- Tube diameter
- 1.67 in (42 mm)
- Maximum roll-up
- 3.00 in (77 mm) diameter
- Tube center
- 5.00 in (127 mm)
- Tube center
- 1.88 in (48 mm)
- Tube center
- 2.88 in (73 mm)
- Tube center
- 1.88 in (48 mm)
- 3 in pocket flap (optional)
- 2.89 in (74 mm)
- Unlabeled dimension
- 1.38 in (35 mm)
- Unlabeled dimension
- 0.38 in (9 mm)
- Parts labeled
- Mounting bracket, wall fasteners, hanger without tile support (shown), hembar (varies)
- Mounting configurations
- Ceiling, wall and jamb; wall mount shown
- Clearances
- All clearances in place as supplied by the factory; the installer keeps them when using adjustment features
- Adjustments at maximum roll diameter
- Not all available
Title block
PDF page 1 of 085424, opens in a new tab- Title
- Roller 64 dual mount shade in 6 x 9 in pocket
- Drawing
- 085424
- Scale
- 1/2
- View
- 1
- Revision
- A
Facts Lutron states in 085424
The values Lutron document 085424 states, as published:
- Pocket depth
- 6.00 in (152 mm)
- Pocket height
- 9.00 in (229 mm)
- Tube diameter
- 1.67 in (42 mm), printed at two places
- Maximum roll-up
- 3.00 in (77 mm) diameter
- Tube center
- Four values, each tube and face shown only on the drawing:
- 5.00 in (127 mm)
- 2.88 in (73 mm)
- 1.88 in (48 mm), printed twice
- Pocket flap
- Optional 3 in pocket flap, dimensioned 2.89 in (74 mm)
- Labeled parts
- Mounting bracket, wall fasteners, hanger without tile support (shown) and hembar (varies)
- Mounting
- The bracket supports ceiling, wall and jamb mounting, with a wall mount drawn
- Clearances
- A shade fitted as supplied by the factory has its operating clearances
- After adjustment
- The installer keeps the clearances after any adjustment, and not every adjustment is available at the maximum roll diameter
- Unlabeled values
- 1.38 in (35 mm) and 0.38 in (9 mm) are printed without labels
- Scale, view and revision
- 1/2 scale, view 1, revision A, no date printed
- File formats
- PDF, DWG and DXF
Questions about document 085424
The answers come from Lutron document 085424 and New Way's record of it.
What is Lutron drawing 085424?
Lutron's one-page dual mount pocket section, view 1, published as PDF, DWG and DXF with no date printed.
Which revision of 085424 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085424 cover?
Lutron Sivoia QS roller shades in the Roller 64 drive class.
What pocket size does Lutron draw for the Roller 64 dual mount?
Lutron drawing 085424 draws a pocket 6.00 in (152 mm) deep and 9.00 in (229 mm) high. The title names it the 6 in x 9 in pocket.
How large are the tubes, roll-up and tube centers?
Lutron drawing 085424 prints a 1.67 in (42 mm) tube diameter at two places and a 3.00 in (77 mm) maximum roll-up.
- Tube centers: 5.00 in (127 mm), 2.88 in (73 mm), 1.88 in (48 mm) twice
- Which tube and face each measures: shown only on the drawing
Which fixings and parts are labeled?
Lutron labels the mounting bracket, wall fasteners, a hanger shown without tile support, and the hembar, marked as varying. No fastener size is printed.
Can the bracket be fixed to the ceiling instead of the wall?
Yes, Lutron's note on drawing 085424 says the bracket supports ceiling, wall and jamb mounting. The section shows the wall mount.
Is a pocket flap included?
Lutron draws an optional 3 in pocket flap on drawing 085424 and dimensions it at 2.89 in (74 mm). The flap is marked optional, so the pocket can be detailed with or without it.
Other Sivoia QS Roller 64 CAD drawings
CAD drawings for the same Sivoia QS Roller 64 drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085519Roller 64 CAD Drawing: Dual Left Shade Bracket, Detail Drawing | Roller 64 | A | |
| 085425Roller 64 CAD Drawing: Dual Mount Shade, Elevation View | Roller 64 | A | |
| 085520Roller 64 CAD Drawing: Dual Right Shade Bracket, Detail Drawing | Roller 64 | A | |
| 085766Roller 64 CAD Drawing: WIDR Dual Mount Shade in 5.5″ x 7.5″ Pocket, Section View | Roller 64 | B |
Documents used with 085424
Lutron drawing 085425 is the dual mount elevation view, and an unnumbered dual mount (pocket) section is a third sheet. Lutron drawings 085519 and 085520 are the dual shade brackets, and 085705 is the Roller 64 specification submittal.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085705Roller 64 Specification Submittal | Specification Submittal | D | Sep 2025 |
| 045843Roller 64 Installation Guide: WIDR Pocket Mount | Installation Guide | B | Sep 2021 |
| 045929Roller 64 Installation Guide: WIDR, 4″ Fascia Mount Chassis (Regular Roll) | Installation Guide | B | Aug 2023 |
| Roller 64 Revit Family: Ceiling Mount | Revit Family | ||
| Roller 64 Revit Family: Dual (Ceiling Mount) | Revit Family | ||
| Roller 64 Revit Family: Dual (Wall Mount) | Revit Family | ||
| Roller 64 Revit Family: Pocket Mount | Revit Family | ||
| Roller 64 Revit Family: Wall Mount | Revit Family | ||
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| 369847Pico Wireless Control, 4-Button Specification Submittal | Specification Submittal | K | Mar 2024 |
Revisions of 085424
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085424, and what to read next
Lutron drawing 085424 gives no elevation, minimum shade size, light gap or fastener size.
Publisher and citation for document 085424
Lutron Electronics Co., Inc. publishes document 085424, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085424 filled in.
