You searched and this document matched it.
See all resultsCAD Drawing · Rev A · English · PDF, 1 page, 0.2 MB
Lutron Sivoia QS Roller 64 CAD Drawing: Dual Mount (Pocket), Detail Drawing
Lutron's typical section of the Roller 64 dual mount shade in a pocket, a one-page detail drawing at 1/2 scale.
Lutron, Sivoia QS Roller 64 CAD Drawing: Dual Mount (Pocket), Detail Drawing. https://assets.lutron.com/a/documents/0035-r064-dmt-rr-dsc.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-64-cad-drawing-dual-mount-pocket-detail-drawing/
About this Sivoia QS drawing
Lutron's Roller 64 dual mount (pocket) detail drawing, revision A with a 2009 copyright line and no drawing number, prints the maximum roll-up, labeled pocket elements, nine unlabeled dimensions and a top-view legend.
What this Sivoia QS drawing covers
This Sivoia QS drawing has these six sections, all on its one page.
- Typical section of the dual mount shade
- Legend keyed to the top view
- Maximum roll-up
- Labels: glazing, ceiling, blocking, flap, side channel, hembar
- Dimensions printed without labels
- Title block: scale, revision and copyright line
Specifications in this Sivoia QS drawing
This Sivoia QS drawing prints 16 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
Typical section
PDF page 1 of this Sivoia QS drawing, opens in a new tab- Maximum roll-up
- 3.00 in (76 mm) diameter
- Unlabeled dimension
- 6.00 in (152 mm)
- Unlabeled dimension
- 7.00 in (178 mm)
- Unlabeled dimension
- 3.90 in (99 mm)
- Unlabeled dimension
- 0.37 in (9 mm)
- Unlabeled dimension
- 0.42 in (11 mm)
- Unlabeled dimension
- 6.26 in (159 mm)
- Unlabeled dimension
- 3.00 in (76 mm)
- Unlabeled dimension
- 0.88 in (22 mm)
- Unlabeled dimension
- 0.29 in (7 mm)
- Elements labeled
- Glazing (typical), finished ceiling, wood blocking, flap (optional), hembar (varies), side channel
- Title
- Roller shade detail drawing, Roller 64 dual mount (pocket)
- Scale
- 1/2
- Revision
- A
- Copyright
- 2009
- Drawing number
- Not printed
Facts Lutron states in this Sivoia QS drawing
The values this Sivoia QS drawing states, as published:
- Subject
- Roller 64 dual mount shade in a pocket, typical section
- Maximum roll-up
- 3.00 in (76 mm) diameter
- Labeled elements
- Glazing (typical)
- Finished ceiling
- Wood blocking
- Flap (optional)
- Side channel
- Hembar (varies)
- Wood blocking
- Labeled on the section, with no size or fastener printed for it
- Flap
- Marked optional
- Unlabeled dimensions, larger five
- 6.00 in (152 mm)
- 7.00 in (178 mm)
- 3.90 in (99 mm)
- 6.26 in (159 mm)
- 3.00 in (76 mm)
- Unlabeled dimensions, smaller four
- 0.88 in (22 mm)
- 0.42 in (11 mm)
- 0.37 in (9 mm)
- 0.29 in (7 mm)
- What the dimensions measure
- Shown only on the drawing, since none of the nine carries a label
- Legend
- Top-view legend with two numbered markers, 1 and 2
- Scale and revision
- 1/2 scale, revision A, copyright 2009, with no drawing number or issue date printed
- File formats
- PDF only, with no DWG or DXF listed
Questions about this Sivoia QS drawing
The answers come from this Sivoia QS drawing and New Way's record of it.
What is Lutron's Roller 64 dual mount pocket typical section?
Lutron's one-page PDF typical section, with no DWG or DXF listed. The title block carries revision A and a 2009 copyright line, with no drawing number or issue date.
Which revision of this Sivoia QS drawing is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does this Sivoia QS drawing cover?
Lutron Sivoia QS roller shades in the Roller 64 drive class.
What maximum roll-up does the typical section draw?
Lutron prints a maximum roll-up of 3.00 in (76 mm) diameter on the Roller 64 dual mount (pocket) typical section.
Does the typical section state the pocket size?
Not with labels, since Lutron prints 6.00 in (152 mm), 7.00 in (178 mm) and seven other values without naming what they measure. Lutron drawing 085424 is the numbered section view of the Roller 64 dual mount shade in a pocket.
What does the typical section show around the shade?
Lutron labels the glazing (typical), the finished ceiling, wood blocking, an optional flap, a side channel and the hembar. The hembar is marked as varying.
Does the typical section give fixing sizes or steps?
Lutron's typical section prints no fasteners, fixing sizes or installation steps, and wood blocking is labeled but not sized. Lutron document 045618 is the Roller 20/64 pocket mount chassis installation guide.
Is a pocket flap part of the detail?
Lutron draws a flap on the typical section and marks it optional. The pocket can be detailed with or without one.
Other Sivoia QS Roller 64 CAD drawings
CAD drawings for the same Sivoia QS Roller 64 drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085519Roller 64 CAD Drawing: Dual Left Shade Bracket, Detail Drawing | Roller 64 | A | |
| 085424Roller 64 CAD Drawing: Dual Mount Shade in 6″ x 9″ Pocket, Section View | Roller 64 | A | |
| 085520Roller 64 CAD Drawing: Dual Right Shade Bracket, Detail Drawing | Roller 64 | A | |
| 085425Roller 64 CAD Drawing: Dual Mount Shade, Elevation View | Roller 64 | A |
Documents used with this Sivoia QS drawing
Lutron drawings 085424 and 085425 are the dual mount section and elevation views, with brackets 085519 (left) and 085520 (right). Lutron publishes a dual and custom pocket lineal detail drawing, and 045334 is the side channel installation guide.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045334Roller Shades Installation Guide: Side Channel | Installation Guide | A | |
| 085705Roller 64 Specification Submittal | Specification Submittal | D | Sep 2025 |
| 045843Roller 64 Installation Guide: WIDR Pocket Mount | Installation Guide | B | Sep 2021 |
| 045929Roller 64 Installation Guide: WIDR, 4″ Fascia Mount Chassis (Regular Roll) | Installation Guide | B | Aug 2023 |
| Roller 64 Revit Family: Ceiling Mount | Revit Family | ||
| Roller 64 Revit Family: Dual (Ceiling Mount) | Revit Family | ||
| Roller 64 Revit Family: Dual (Wall Mount) | Revit Family | ||
| Roller 64 Revit Family: Pocket Mount | Revit Family | ||
| Roller 64 Revit Family: Wall Mount | Revit Family | ||
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
Revisions of this Sivoia QS drawing
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in this Sivoia QS drawing, and what to read next
Lutron's typical section names no pocket size, bracket, tube diameter or fixing, and gives no elevation or light gap.
Publisher and citation for this Sivoia QS drawing
Lutron Electronics Co., Inc. publishes this document and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
