You searched and this document matched it.
See all results085673 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Roller 64 CAD Drawing: WIDR Butt and Pass Corner Solution (085673)
Lutron's installation drawing for two Roller 64 WIDR shades meeting at a corner in a butt and pass arrangement.
Lutron 085673 Rev A, Sivoia QS Roller 64 CAD Drawing: WIDR Butt and Pass Corner Solution. https://assets.lutron.com/a/documents/085673_roller_64_widr_butt_and_pass_corner_solution.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-64-cad-drawing-085673/
About document 085673
Lutron drawing 085673, Rev A, is the two-page butt and pass installation drawing: typical details and light gaps on page 1, bracket details, deductions and projection adjustments on page 2.
What drawing 085673 covers
Lutron document 085673 has these eleven sections. Each link opens the PDF at that page in a new tab.
- Butt and pass typical details, auxiliary views, opens in a new tab page 1
- Light gaps at maximum roll, regular and reverse, opens in a new tab page 1
- Section drawing pointer: system height and mounting, opens in a new tab page 1
- Clearance and adjustment note, opens in a new tab page 1
- Butt and pass bracket details in top views, opens in a new tab page 2
- Deduction basis for the 90 degree corner, opens in a new tab page 2
- Ceiling mount top view, opens in a new tab page 2
- Pocket mount top view, opens in a new tab page 2
- Wall mount top view, opens in a new tab page 2
- Fascia: not recommended, opens in a new tab page 2
- Title blocks with scale, page and revision, opens in a new tab page 1
Specifications in 085673
Lutron document 085673 prints 25 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
Page 1, auxiliary views
PDF page 1 of 085673, opens in a new tab- Reverse roll light gap at maximum roll
- 0.995 in (25 mm) typical
- Regular roll light gap at maximum roll
- 4.295 in (109 mm)
- Bracket shown
- Wall bracket
- System height and mounting requirements
- See the section drawing
- Scale of the 3D corner view
- 1/6
Page 2, top views: ceiling
PDF page 2 of 085673, opens in a new tab- Measurement deduction
- 3.860 in (98 mm)
- Minimum clearance required
- 0.25 in (6 mm)
- Maximum roll-up
- 3.30 in (84 mm)
- Roll tube centerline
- 1.96 in (50 mm)
- Projection adjust
- -0.25 in / +0.25 in
Page 2, top views: pocket
PDF page 2 of 085673, opens in a new tab- Measurement deduction
- 4.25 in (108 mm)
- Pocket outline
- Dashed line
Page 2, top views: wall
PDF page 2 of 085673, opens in a new tab- Measurement deduction
- 3.860 in (98 mm)
- Minimum clearance required
- 0.25 in (6 mm)
- Maximum roll-up
- 3.30 in (84 mm)
- Roll tube centerline
- 1.96 in (50 mm)
- Projection adjust
- -0.5 in / +0 in
Page 2, top views: fascia
PDF page 2 of 085673, opens in a new tab- Fascia arrangement
- Not recommended
- Deductions
- Minimum recommended, based on a 90° corner, applied to both shades
- Clearances
- Set at the factory; kept by the installer when adjustment features are used
- Adjustments at maximum roll diameter
- Not all available
- Title
- Roller 64 WIDR butt and pass installation
- Number as printed
- 085673
- Page 1
- Butt and pass typical details, auxiliary views, scale 1/5, revision A
- Page 2
- Butt and pass bracket details, top views, scale 1/4, revision A
Facts Lutron states in 085673
The values Lutron document 085673 states, as published:
- What the drawing shows
- Two Roller 64 WIDR shades meeting at a corner, butt and pass
- Light gap, reverse roll
- 0.995 in (25 mm) typical at maximum roll, wall bracket shown
- Light gap, regular roll
- 4.295 in (109 mm) at maximum roll
- System height and mounting
- Referred to the section drawing, which the corner sheets do not name
- Deduction, ceiling and wall mounts
- 3.860 in (98 mm)
- Deduction, pocket mount
- 4.25 in (108 mm), pocket drawn as a dashed line
- Deduction basis
- Minimum recommended deductions, based on a 90 degree corner and applied to both shades
- Minimum clearance, ceiling and wall
- 0.25 in (6 mm)
- Maximum roll-up, ceiling and wall
- 3.30 in (84 mm)
- Roll tube centerline
- 1.96 in (50 mm), ceiling and wall mounts
- Projection adjust, ceiling mount
- -0.25 in / +0.25 in, inch values only
- Projection adjust, wall mount
- -0.5 in / +0 in, inch values only
- Fascia arrangement
- Marked not recommended for the butt and pass corner
- Clearances as supplied
- A shade fitted as the factory supplies it has the clearances it needs to run
- Adjustment features
- Lutron makes the installer responsible for the clearances once the adjustment features are used
- Adjustment at maximum roll
- Some adjustments are not available at the maximum roll diameter
- Title blocks
- Roller 64 WIDR butt and pass installation, 085673
- Page 1: scale 1/5, with the corner's 3D view at 1/6
- Page 2: scale 1/4
- Revision A on both pages
Questions about document 085673
The answers come from Lutron document 085673 and New Way's record of it.
What is Lutron document 085673?
Lutron's installation drawing for two Roller 64 WIDR shades meeting at a corner in a butt and pass arrangement. Lutron drawing 085673, Rev A, is the two-page butt and pass installation drawing: typical details and light gaps on page 1, bracket details, deductions and projection adjustments on page 2.
Which revision of 085673 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085673 cover?
Lutron Sivoia QS roller shades in the Roller 64 drive class.
What does Lutron drawing 085673 show?
Lutron drawing 085673 prints two sheets at revision A. Lutron's page 1 holds auxiliary views at 1/5 with the typical details, wall bracket shown.
Lutron's page 2 holds top views at 1/4 with the bracket details.
Which mounts can a Roller 64 WIDR butt and pass corner use?
Lutron draws ceiling, wall and pocket top views on page 2 of drawing 085673. Lutron marks the fascia arrangement as not recommended.
How much do I deduct from each shade at the corner?
Lutron prints 3.860 in (98 mm) for the ceiling and wall mounts and 4.25 in (108 mm) for the pocket mount, per drawing 085673. Lutron calls them minimum recommended deductions, based on a 90 degree corner and applied to both shades.
How much projection adjustment does the corner bracket allow?
Lutron prints a projection adjust of -0.25 in / +0.25 in on the ceiling mount, in inches only. Lutron's wall mount adjust is -0.5 in / +0 in.
Lutron makes the installer responsible for clearances once the adjustments are used. Lutron notes that not every adjustment is available at the maximum roll diameter.
How much light gets past a butt and pass corner?
Lutron marks the light gap at maximum roll as 0.995 in (25 mm) typical for reverse roll, wall bracket shown. Lutron's regular roll figure is 4.295 in (109 mm).
Other Sivoia QS Roller 64 CAD drawings
CAD drawings for the same Sivoia QS Roller 64 drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085666Roller 64 CAD Drawing: WIDR Ceiling Mount, Section View | Roller 64 | A | |
| 085675Roller 64 CAD Drawing: WIDR Corner Staggered Regular Roll | Roller 64 | A | |
| 085674Roller 64 CAD Drawing: WIDR Corner to Corner Regular Roll | Roller 64 | A | |
| 085669Roller 64 CAD Drawing: WIDR Wall Mount, Section View | Roller 64 | A |
Documents used with 085673
Lutron's Roller 64 WIDR section views are 085666 (ceiling mount), 085669 (wall mount) and 085668 (4 in (103 mm) pocket). Lutron's other WIDR corner drawings are 085674, corner to corner regular roll, and 085675, corner staggered regular roll.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085705Roller 64 Specification Submittal | Specification Submittal | D | Sep 2025 |
| 045843Roller 64 Installation Guide: WIDR Pocket Mount | Installation Guide | B | Sep 2021 |
| 045929Roller 64 Installation Guide: WIDR, 4″ Fascia Mount Chassis (Regular Roll) | Installation Guide | B | Aug 2023 |
| Roller 64 Revit Family: Ceiling Mount | Revit Family | ||
| Roller 64 Revit Family: Dual (Ceiling Mount) | Revit Family | ||
| Roller 64 Revit Family: Dual (Wall Mount) | Revit Family | ||
| Roller 64 Revit Family: Pocket Mount | Revit Family | ||
| Roller 64 Revit Family: Wall Mount | Revit Family | ||
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| 085274Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
Revisions of 085673
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085673, and what to read next
Lutron's drawing 085673 prints no system height, detailed mounting requirements or installation steps.
Publisher and citation for document 085673
Lutron Electronics Co., Inc. publishes document 085673, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085673 filled in.
