You searched and this document matched it.
See all resultsCAD Drawing · English · PDF, DWG, DXF
Lutron Sivoia QS Roller 64 CAD Drawing: Corner Staggered Regular Roll
Lutron's CAD drawing of two Sivoia QS Roller 64 shades meeting at a corner with a staggered regular roll.
Lutron, Sivoia QS Roller 64 CAD Drawing: Corner Staggered Regular Roll. https://assets.lutron.com/a/documents/64_corner_option_3.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-64-cad-drawing-corner-staggered-regular-roll/
About this Sivoia QS drawing
Lutron's corner staggered regular roll sheet prints three untitled views, the maximum and minimum rollup, the fabric gap at the lower limits and a title line with no number, revision or date.
What this Sivoia QS drawing covers
This Sivoia QS drawing has these six sections.
- View from above of the two shades
- Maximum rollup on both shades
- Isometric view of the fabrics crossing
- One shade between its brackets, with rollups
- Bracket to bracket length and typical dimension
- Lutron header and title line
Specifications in this Sivoia QS drawing
This Sivoia QS drawing prints 13 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
view 1, the two shades at the corner seen from above
PDF page 1 of this Sivoia QS drawing, opens in a new tab- Unlabeled dimension at the top left of the view
- 1.00 in (25 mm)
- Unlabeled dimension at the left of the view
- 1.50 in (38 mm)
- Unlabeled dimension on the upper shade
- .31 in (8 mm)
- MAX. ROLLUP, upper shade
- ⌀3.00 in (⌀76 mm)
- MAX. ROLLUP, left shade
- ⌀3.00 in (⌀76 mm)
- Unlabeled dimension on the left shade
- .31 in (8 mm)
view 2, the fabrics at the corner, isometric
PDF page 1 of this Sivoia QS drawing, opens in a new tab- FABRIC GAP @ LOWER LIMITS
- 1.34 in (34 mm)
view 3, one shade between its brackets
PDF page 1 of this Sivoia QS drawing, opens in a new tab- Unlabeled dimension above the bracket end, outer
- 3.25 in (83 mm)
- Unlabeled dimension above the bracket end, inner
- .25 in (6 mm)
- MIN. ROLLUP
- ⌀1.67 in (⌀42 mm)
- MAX. ROLLUP
- ⌀3.00 in (⌀76 mm)
- BRACKET TO BRACKET
- no figure printed
- Unlabeled dimension at the lower bracket, marked TYP
- .75 in (19 mm) (TYP)
Facts Lutron states in this Sivoia QS drawing
The values this Sivoia QS drawing states, as published:
- Product and arrangement
- Sivoia QS Roller 64, corner staggered regular roll
- Title line on the sheet
- Sivoia QED 64 corner mount roller shade, staggered regular roll
- Views
- Three untitled views, no scale printed:
- The two shades at the corner, seen from above
- An isometric view of the fabrics at the corner
- One shade between its brackets, bracket end in a dashed circle
- Maximum rollup
- ⌀3.00 in (⌀76 mm), marked on both shades in the view from above and once on the single-shade view
- Minimum rollup
- ⌀1.67 in (⌀42 mm), marked on the single-shade view
- Fabric gap at lower limits
- 1.34 in (34 mm), marked on the isometric view
- Typical dimension
- 0.75 in (19 mm), marked TYP at the lower bracket of the single-shade view
- Unnamed values, view from above
- 1.00 in (25 mm)
- 1.50 in (38 mm)
- 0.31 in (8 mm), printed twice
- Unnamed values, bracket end
- 3.25 in (83 mm) and 0.25 in (6 mm), above the bracket end
- Formats
- PDF (one page, about 67 KB), DWG and DXF
Questions about this Sivoia QS drawing
The answers come from this Sivoia QS drawing and New Way's record of it.
What is this Sivoia QS drawing?
Lutron's CAD drawing of two Sivoia QS Roller 64 shades meeting at a corner with a staggered regular roll. Lutron's corner staggered regular roll sheet prints three untitled views, the maximum and minimum rollup, the fabric gap at the lower limits and a title line with no number, revision or date.
Which revision of this Sivoia QS drawing is current?
Lutron publishes this Sivoia QS drawing without a revision letter. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does this Sivoia QS drawing cover?
Lutron Sivoia QS roller shades in the Roller 64 drive class.
What does Lutron's Roller 64 corner staggered regular roll drawing show?
Lutron's drawing shows two Roller 64 shades at a staggered regular roll corner in three untitled views, no scale printed.
- The shades seen from above, with the structure hatched
- The fabrics at the corner, in isometric
- One shade between its brackets, bracket end in a dashed circle
What fabric gap does Lutron draw for the Roller 64 staggered corner?
Lutron's isometric view labels the fabric gap at the lower limits as 1.34 in (34 mm) for the staggered regular roll arrangement.
What rollup diameters does the sheet mark?
Lutron marks a maximum rollup of ⌀3.00 in (⌀76 mm) on both shades and on the single-shade view. The minimum rollup, ⌀1.67 in (⌀42 mm), is marked on the single-shade view.
Does the drawing carry a document number, revision, scale or date?
No, Lutron's sheet prints a header and a title line only, with no document number, revision letter, scale or date. Lutron publishes the file as PDF, DWG and DXF under the name 64_corner_option_3.
Which documents go with this Sivoia QS drawing?
Three documents go with this Sivoia QS drawing, listed under Documents used with this Sivoia QS drawing with the others:
Other Sivoia QS Roller 64 CAD drawings
CAD drawings for the same Sivoia QS Roller 64 drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085675Roller 64 CAD Drawing: WIDR Corner Staggered Regular Roll | Roller 64 | A | |
| Roller 64 CAD Drawing: Reverse Corner Regular Roll | Roller 64 | ||
| 085674Roller 64 CAD Drawing: WIDR Corner to Corner Regular Roll | Roller 64 | A | |
| 085768Roller 64 CAD Drawing: WIDR Shade Mount with 4″ Fascia Brackets (Regular Roll), Elevation View | Roller 64 | A |
Documents used with this Sivoia QS drawing
Lutron's other Roller 64 corner drawings: butt and pass corner solution, corner to corner reverse roll, reverse corner regular roll. Lutron drawing 085675 is the WIDR corner staggered regular roll, and 085705 the Roller 64 specification submittal.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085705Roller 64 Specification Submittal | Specification Submittal | D | Sep 2025 |
| 045843Roller 64 Installation Guide: WIDR Pocket Mount | Installation Guide | B | Sep 2021 |
| 045929Roller 64 Installation Guide: WIDR, 4″ Fascia Mount Chassis (Regular Roll) | Installation Guide | B | Aug 2023 |
| Roller 64 Revit Family: Ceiling Mount | Revit Family | ||
| Roller 64 Revit Family: Dual (Ceiling Mount) | Revit Family | ||
| Roller 64 Revit Family: Dual (Wall Mount) | Revit Family | ||
| Roller 64 Revit Family: Pocket Mount | Revit Family | ||
| Roller 64 Revit Family: Wall Mount | Revit Family | ||
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| 369847Pico Wireless Control, 4-Button Specification Submittal | Specification Submittal | K | Mar 2024 |
Not covered in this Sivoia QS drawing, and what to read next
Lutron's sheet shows the corner arrangement only: no bracket detail, pocket or fascia profile, wiring or mounting steps.
Publisher and citation for this Sivoia QS drawing
Lutron Electronics Co., Inc. publishes this document and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
