You searched and this document matched it.
See all resultsCAD Drawing · English · PDF, DWG, DXF
Lutron Sivoia QS Roller 100 CAD Drawing: Corner Staggered Regular Roll
Lutron's CAD drawing of two Sivoia QS Roller 100 shades meeting at a corner with a staggered regular roll.
Lutron, Sivoia QS Roller 100 CAD Drawing: Corner Staggered Regular Roll. https://assets.lutron.com/a/documents/100_corner_option_3.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-100-cad-drawing-corner-staggered-regular-roll/
About this Sivoia QS drawing
Lutron's corner staggered regular roll drawing is a one-page sheet, published as PDF, DWG and DXF, with three views and no document number, revision, date, scale or view titles.
What this Sivoia QS drawing covers
This Sivoia QS drawing has these six sections.
- View from above, chassis at the corner
- Isometric view of the fabrics at the corner
- Front view of one shade, rollup circle
- Maximum rollup on both shades and bracket end
- Bracket to bracket length, labeled without a figure
- Lutron header with the sheet's title line
Specifications in this Sivoia QS drawing
This Sivoia QS drawing prints 13 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
view 1, the two chassis at the corner seen from above
PDF page 1 of this Sivoia QS drawing, opens in a new tab- Unlabelled dimension at the top of the view
- 1.00 in [25 mm]
- Unlabelled dimension at the left of the view
- 2.25 in [57 mm]
- Unlabelled dimension on the upper shade
- 1.00 in [25 mm]
- MAX. ROLLUP, upper shade
- ⌀4.00 in [⌀102 mm]
- MAX. ROLLUP, left shade
- ⌀4.00 in [⌀102 mm]
- Unlabelled dimension on the left shade
- 1.00 in [25 mm]
- Unlabelled dimension at the foot of the view, marked TYP
- .75 in [19 mm] (TYP)
view 2, the fabrics at the corner, isometric
PDF page 1 of this Sivoia QS drawing, opens in a new tab- FABRIC GAP @ LOWER LIMIT
- .83 in [21 mm]
view 3, one shade from the front
PDF page 1 of this Sivoia QS drawing, opens in a new tab- Unlabelled dimension above the bracket end, outer
- 4.25 in [108 mm]
- Unlabelled dimension above the bracket end, inner
- .25 in [6 mm]
- MAX. ROLLUP, circle round the bracket end
- ⌀4.00 in [⌀102 mm]
- MIN. ROLLUP
- ⌀2.562 in [⌀65 mm]
- MAX. ROLLUP
- ⌀4.00 in [⌀102 mm]
Facts Lutron states in this Sivoia QS drawing
The values this Sivoia QS drawing states, as published:
- Product and arrangement
- Sivoia QS Roller 100, corner staggered regular roll
- Title line on the sheet
- Sivoia QED 100 corner mount roller shade, staggered regular roll
- Views
- The two chassis at the corner seen from above
- Isometric view of the fabrics at the corner
- Front view of one shade, bracket end inside a maximum rollup circle
- Maximum rollup
- ⌀4.00 in (⌀102 mm), marked on both shades in the view from above and twice on the front view
- Minimum rollup
- ⌀2.562 in (⌀65 mm), marked on the front view
- Fabric gap at lower limit
- 0.83 in (21 mm), marked on the isometric view
- Typical dimension
- 0.75 in (19 mm), marked TYP at the foot of the view from above
- Other printed figures
- 1.00 in (25 mm) three times and 2.25 in (57 mm) on the view from above
- 4.25 in (108 mm) and 0.25 in (6 mm) above the bracket end, front view
- None of them carries a name on the sheet
- Formats
- PDF (one page, about 67 KB), DWG and DXF
Questions about this Sivoia QS drawing
The answers come from this Sivoia QS drawing and New Way's record of it.
What is Lutron's corner staggered regular roll drawing?
Lutron's sheet, titled "Sivoia QED 100 corner mount roller shade, staggered regular roll", published under the file name 100_corner_option_3.
Which revision of this Sivoia QS drawing is current?
Lutron publishes this Sivoia QS drawing without a revision letter. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does this Sivoia QS drawing cover?
Lutron Sivoia QS roller shades in the Roller 100 drive class.
What does the corner staggered regular roll drawing show?
Lutron's drawing shows two Roller 100 shades meeting at a corner with a staggered regular roll, in three views. Lutron prints no view titles and no scale on the sheet.
- The chassis seen from above
- The fabrics at the corner in isometric
- One shade from the front, bracket end inside a maximum rollup circle
What fabric gap does Lutron draw at the lower limit?
Lutron's isometric view labels the fabric gap at the lower limit as 0.83 in (21 mm) for the staggered regular roll arrangement.
What rollup diameters does the sheet mark?
Lutron marks a maximum rollup of ⌀4.00 in (⌀102 mm) on both shades and at the bracket end. The minimum rollup, ⌀2.562 in (⌀65 mm), sits on the front view.
Does the drawing carry a document number, revision, scale or date?
No. Lutron's sheet prints a header and a title line only. No document number, revision letter, scale or date appears on it.
Lutron publishes the file as PDF, DWG and DXF under the name 100_corner_option_3.
Which documents go with this Sivoia QS drawing?
Three documents go with this Sivoia QS drawing, listed under Documents used with this Sivoia QS drawing with the others:
- guide 045627: how to install this shade
- Lutron Sivoia QS Roller 100 Installation Guide: Angled Coupler WIDR Tube, Light Gap Reference: how to install this shade: Angled Coupler WIDR Tube, Light Gap Reference
- Lutron Sivoia QS Roller 100 Installation Guide: Angled Coupler, Light Gap Reference 2.5″ Tube: how to install this shade: Angled Coupler, Light Gap Reference 2.5 in. Tube
Other Sivoia QS Roller 100 CAD drawings
CAD drawings for the same Sivoia QS Roller 100 drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| Roller 100 CAD Drawing: Corner to Corner Regular Roll | Roller 100 | ||
| Roller 100 CAD Drawing: Reverse Corner Regular Roll | Roller 100 | ||
| 085609Roller 100 CAD Drawing: 4″ (103mm) Square Fascia End Cap, Detail Drawing | Roller 100 | A | |
| 085610Roller 100 CAD Drawing: 4″ (103mm) Square Fascia, Detail Drawing | Roller 100 | A |
Documents used with this Sivoia QS drawing
Lutron publishes four Roller 100 corner drawings: this sheet, butt and pass, corner to corner and reverse corner. Lutron document 045627 is the Sivoia QS pocket mount chassis installation guide.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045627ROLLER 100/150/300 – Pocket Mount Chassis Installation Guide | Installation Guide | A | Feb 2019 |
| Roller 100 Installation Guide: Angled Coupler WIDR Tube, Light Gap Reference | Installation Guide | A | |
| Roller 100 Installation Guide: Angled Coupler, Light Gap Reference 2.5″ Tube | Installation Guide | A | |
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| 369847Pico Wireless Control, 4-Button Specification Submittal | Specification Submittal | K | Mar 2024 |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 085274Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
| Revit Family: QS J-Box 35V Power Supply | Revit Family |
Not covered in this Sivoia QS drawing, and what to read next
Lutron's corner sheet shows the arrangement only: no bracket detail, pocket or fascia profile, wiring or mounting steps.
Publisher and citation for this Sivoia QS drawing
Lutron Electronics Co., Inc. publishes this document and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
