You searched and this document matched it.
See all resultsCAD Drawing · English · PDF, DWG, DXF
Lutron Sivoia QS Roller 100 CAD Drawing: Reverse Corner Regular Roll
Lutron's CAD drawing of two Sivoia QS Roller 100 shades meeting at a reverse corner with a regular roll.
Lutron, Sivoia QS Roller 100 CAD Drawing: Reverse Corner Regular Roll. https://assets.lutron.com/a/documents/100_corner_option_4.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-100-cad-drawing-reverse-corner-regular-roll/
About this Sivoia QS drawing
Lutron's reverse corner regular roll drawing is a one-page sheet, published as PDF, DWG and DXF, with three views and no document number, revision, date, scale or view titles.
What this Sivoia QS drawing covers
This Sivoia QS drawing has these six sections.
- Isometric view of the fabrics and brackets
- View from above, chassis at the corner
- Front view of one shade, bracket end below
- Maximum rollup marked on both shades
- Bracket to bracket length, labeled without a figure
- Lutron header with the sheet's title line
Specifications in this Sivoia QS drawing
This Sivoia QS drawing prints nine values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
view 1, the fabrics and brackets at the corner, isometric
PDF page 1 of this Sivoia QS drawing, opens in a new tab- FABRIC GAP @ LOWER LIMITS
- 3.25 in [83 mm]
view 2, the two chassis at the corner seen from above
PDF page 1 of this Sivoia QS drawing, opens in a new tab- Unlabelled dimension on the upright shade
- 1.00 in [25 mm]
- MAX. ROLLUP, upright shade
- ⌀4.00 in [⌀102 mm]
- Unlabelled dimension on the lower shade
- 1.00 in [25 mm]
- MAX. ROLLUP, lower shade
- ⌀4.00 in [⌀102 mm]
- Unlabelled dimension at the right end of the lower shade, marked TYP
- .75 in [19 mm] (TYP)
- BRACKET TO BRACKET, lower shade
- no figure printed
view 3, one shade from the front
PDF page 1 of this Sivoia QS drawing, opens in a new tab- MIN. ROLLUP
- ⌀2.562 in [⌀65 mm]
- MAX. ROLLUP
- ⌀4.00 in [⌀102 mm]
Facts Lutron states in this Sivoia QS drawing
The values this Sivoia QS drawing states, as published:
- Product and arrangement
- Sivoia QS Roller 100, reverse corner regular roll
- Title line on the sheet
- Sivoia QED 100 corner mount roller shade, reverse corner regular roll
- Views
- Isometric view of the fabrics and brackets at the corner
- The two chassis at the corner seen from above
- Front view of one shade, bracket end drawn below the shade
- Maximum rollup
- ⌀4.00 in (⌀102 mm), marked on both shades in the view from above and on the front view
- Minimum rollup
- ⌀2.562 in (⌀65 mm), marked on the front view
- Fabric gap at lower limits
- 3.25 in (83 mm), marked on the isometric view
- Typical dimension
- 0.75 in (19 mm), marked TYP on the lower shade in the view from above
- Other printed figures
- 1.00 in (25 mm) on each shade in the view from above, neither named on the sheet
- Formats
- PDF (one page, about 76 KB), DWG and DXF
Questions about this Sivoia QS drawing
The answers come from this Sivoia QS drawing and New Way's record of it.
What is Lutron's reverse corner regular roll drawing?
Lutron's sheet, titled "Sivoia QED 100 corner mount roller shade, reverse corner regular roll", published under the file name 100_corner_option_4.
Which revision of this Sivoia QS drawing is current?
Lutron publishes this Sivoia QS drawing without a revision letter. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does this Sivoia QS drawing cover?
Lutron Sivoia QS roller shades in the Roller 100 drive class.
What does the reverse corner regular roll drawing show?
Lutron's drawing shows two Roller 100 shades meeting at a reverse corner with a regular roll, in three views. Lutron prints no view titles and no scale on the sheet.
- The fabrics and brackets at the corner in isometric
- The chassis seen from above
- One shade from the front, with a bracket end drawn below it
What fabric gap does Lutron draw at the lower limits?
Lutron's isometric view labels the fabric gap at the lower limits as 3.25 in (83 mm) for the reverse corner regular roll arrangement.
What rollup diameters does the sheet mark?
Lutron marks a maximum rollup of ⌀4.00 in (⌀102 mm) on both shades and on the front view. The minimum rollup, ⌀2.562 in (⌀65 mm), sits on the front view.
Does the drawing carry a document number, revision, scale or date?
No. Lutron's sheet prints a header and a title line only. No document number, revision letter, scale or date appears on it.
Lutron publishes the file as PDF, DWG and DXF under the name 100_corner_option_4.
Which documents go with this Sivoia QS drawing?
Three documents go with this Sivoia QS drawing, listed under Documents used with this Sivoia QS drawing with the others:
- Lutron Sivoia QS Roller 100 Installation Guide: Angled Coupler WIDR Tube, Light Gap Reference: how to install this shade: Angled Coupler WIDR Tube, Light Gap Reference
- Lutron Sivoia QS Roller 100 Installation Guide: Angled Coupler, Light Gap Reference 2.5″ Tube: how to install this shade: Angled Coupler, Light Gap Reference 2.5 in. Tube
- submittal 085314: specification submittal: 4-Group RF Remote Control
Other Sivoia QS Roller 100 CAD drawings
CAD drawings for the same Sivoia QS Roller 100 drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| Roller 100 CAD Drawing: Corner Staggered Regular Roll | Roller 100 | ||
| Roller 100 CAD Drawing: Corner to Corner Regular Roll | Roller 100 | ||
| 085609Roller 100 CAD Drawing: 4″ (103mm) Square Fascia End Cap, Detail Drawing | Roller 100 | A | |
| 085610Roller 100 CAD Drawing: 4″ (103mm) Square Fascia, Detail Drawing | Roller 100 | A |
Documents used with this Sivoia QS drawing
Lutron publishes four Roller 100 corner drawings: this sheet, butt and pass, corner to corner and corner staggered. Lutron publishes the same reverse corner regular roll arrangement for the Sivoia QS Roller 64 as a separate CAD drawing.
| Document | Type | Revision | Date |
|---|---|---|---|
| Roller 100 Installation Guide: Angled Coupler WIDR Tube, Light Gap Reference | Installation Guide | A | |
| Roller 100 Installation Guide: Angled Coupler, Light Gap Reference 2.5″ Tube | Installation Guide | A | |
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| 369847Pico Wireless Control, 4-Button Specification Submittal | Specification Submittal | K | Mar 2024 |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 085274Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
| Revit Family: QS J-Box 35V Power Supply | Revit Family | ||
| Revit Family: QS Smart Power Panel, 30 Output | Revit Family |
Not covered in this Sivoia QS drawing, and what to read next
Lutron's corner sheet shows the arrangement only: no bracket detail, pocket or fascia profile, wiring or mounting steps.
Publisher and citation for this Sivoia QS drawing
Lutron Electronics Co., Inc. publishes this document and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
